Show off your Sak mod's!
-
@Helvetica Bold said:
84mm metal saw is quite a rare beast isn’t it?Original case hardened w/o the nail nick ones are. But I haven’t seen any of the Stainless or case hardened 91mm ones shortened to fit 84mm yet.
That’s down the small blade end isn’t it? Mine replaces the main blade which may be the difference?
Yes, it is. Sorry, I wasn’t posting it as an example of a main blade knife replacement.
-
1/2 Cadet X (2 layer, no openers, w/hook)

-
Great minimal edc combo…you can open beer bottles with the hook anyway ;0)
-
Thanks HB…I was thinking about making bit a ‘big money clip’. But I think that should be on a riveted knife. Well, unless the clip is crewed in too. I was thinking the 74mm clip pinned into the back scale.
-
Cadet X
Modern bits, vintage details.

-
-
Hi out there,
this may not be a very outstanding mod, but I wanted a clip at my Alox, and there you go.
Best regards from Germany

-
This one is a bit more sophisticated (prototype), with handle scales made of herdened steel. On one side, the scales are double layered and act as pliers.




-
Cool mod and pliers! Never seen that before, does they work as you wanted?
[It's not failure if you learn something from it]
-
Thank you very much! Yes, they work sort of fine. The pivot ocurs to be a bit weak, as after some use it started to wear out and now there's a bit play in it. Between the double layered scales (the pliers) I had added a detent-ball to secure the closed-position. This is a bit too strong, so you need quite some force to open the pliers. It is a prototype so I ought to create some advanced models.;o)
Best regards
-
@derheimwerkerkoenig said:
Thank you very much! Yes, they work sort of fine. The pivot ocurs to be a bit weak, as after some use it started to wear out and now there's a bit play in it. Between the double layered scales (the pliers) I had added a detent-ball to secure the closed-position. This is a bit too strong, so you need quite some force to open the pliers. It is a prototype so I ought to create some advanced models.;o)Best regards
Cool mod and welcome to the forum !

-
Many thanks for the add!
-
the idea is good, the realization is nice

but I do not see the specific use?
victorinox clamp and thinner layers
-
@derheimwerkerkoenig said:
Thank you very much! Yes, they work sort of fine. The pivot ocurs to be a bit weak, as after some use it started to wear out and now there's a bit play in it. Between the double layered scales (the pliers) I had added a detent-ball to secure the closed-position. This is a bit too strong, so you need quite some force to open the pliers. It is a prototype so I ought to create some advanced models.;o)Best regards
Welcome aboard! Pretty cool and unusual mod. Here's an idea: have you thought of having the plier straight, along the knife, and not at a 90º angle? Maybe it'll be easier to carry/store and use?

-
@pfrsantos said:
Welcome aboard! Pretty cool and unusual mod. Here's an idea: have you thought of having the plier straight, along the knife, and not at a 90º angle? Maybe it'll be easier to carry/store and use?

Yes, I agree with you, but in that case the pliers would interfere with using the Vic tools on that end. That's why I chose the 90 degree angle. And accepted that the tool looks like a fat penguin ... ;)
-
"Outside the box." Keep up the fine work.

-
Very cool mod :o 8) and welcome to

-
@derheimwerkerkoenig said:
Yes, I agree with you, but in that case the pliers would interfere with using the Vic tools on that end. That's why I chose the 90 degree angle. And accepted that the tool looks like a fat penguin ... ;)So stupid of me! Quite right, didn't remember SAKs have tools coming out of every which way!


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
