The Hacked Leatherman Owners Club.
-
So I spent a good bit of time last night trying to hunt down the exact screw size the kick pocket clip uses. Found close to what I needed but nothing exact. So I went to the garage. In a box given to me by a family friend I found one. This box was 60 years old mind you. And there was 1 single screw in this coffee can that worked perfectly! Lol


-
That is great

-
Thanks for all the help gents! This bad boy is just the beginning. I see a long road of tinkering ahead of me after this one lol was so much fun!



-
It's always good to keep all nuts, bolts & washers - you never know when they might come in handy

I mostly remove all potentially useful hardware from anything that is about to be thrown out or recycled, although these days I'm mostly harvesting small diameter self tapping screws.
I do have a substantial "odds & sods" collection (no way would it fit in a single coffee can), sorted by type & approximate size so I don't have to search through too much when I go looking.
-
@gregozedobe said:
It's always good to keep all nuts, bolts & washers - you never know when they might come in handy
I mostly remove all potentially useful hardware from anything that is about to be thrown out or recycled, although these days I'm mostly harvesting small diameter self tapping screws.
I do have a substantial "odds & sods" collection (no way would it fit in a single coffee can), sorted by type & approximate size so I don't have to search through too much when I go looking.
Yeah I think I'm 33 now or something close to it, but every day that passes I understand the grandads a little more. And why they do what they do. What was once laughable, is now genius. What was once odd and peculiar, now seems the stuff of wisdom. As a new homeowner, you're thrust into a world where you have 2 options. Pay someone to do it, or start learning and figure it out. If you're not made of money (which I'm not) that's an easy decision. And let me tell you, it's probably the most fun I've ever had.
-
Thats the spirit. There is fun in learning to do things yourself not to mention the satisfaction. Yeah we save some money as well which is also pretty great. I enjoy all the modding that goes on here. I caught the bug a while back and had such a fun time working out all the kinks. The terrific members here with there support and pictures really helped a lot too. Now that you have a Dremil theres really no stopping you. -
/adds dremel to wish list...
-
@Aloha said:
Thats the spirit. There is fun in learning to do things yourself not to mention the satisfaction. Yeah we save some money as well which is also pretty great. I enjoy all the modding that goes on here. I caught the bug a while back and had such a fun time working out all the kinks. The terrific members here with there support and pictures really helped a lot too. Now that you have a Dremil theres really no stopping you.My wife. My wife will be stopping me lol
-
An excellent mod and very similar to the one I have

It amazes me how well the 2 different handles go together
Dremels are for sure an excellent tool to have when modding and have came in handy on a few other projects for me as well 
-
@Poncho65 said:
An excellent mod and very similar to the one I have

It amazes me how well the 2 different handles go together
Dremels are for sure an excellent tool to have when modding and have came in handy on a few other projects for me as well 
Did you end up with 6 tools on the one side? And if so did you end up having a spacing issue?
I only ended up using like 4 spacers I think. The thing is now a little wider than I had intended. I had a choice to either put the big spacer in (which seemed like a waste) or to add another tool. Thus the awl. But now the locking mechanism is half a hair from popping off as the pins that grab the frame are just a tad too short.
-
The lock tab will shift from left to right. Itching to pop out. But if I tighten it anymore the tools will clump too much or be too hard to open. I thought about removing some material from the inside bottom of the frame. Might give the tools a tiny bit more breathing room. I'd only need a couple millimeters I think.


-
@Obi1shinobee said:
very nice zoid ..
but fuse lock make biggerSooo I'm literally starting back at the beginning of the thread again and gonna read through. Now that I actually have some frame of reference
It's like watching a movie for the 2nd time lol Obi1 solved my problem on the 5th page
Now to just hunt down a fuse lock
-
My hacked Rebars look very similar to that and have never tried to pop put



-
@Poncho65 said:
My hacked Rebars look very similar to that and have never tried to pop put


Well you're the expert Ponch. I'll defer to your best judgment. What's my issue if you had to guess? Too many spacers? Maybe bent the frame a touch cramming in the tools? Short lock pins? I'm about to start tinkering in a bit. So I'll be trying some different things
-
Could be to many washers
it has been so long since I did that mod that I forget which ones I left in 
I will try and check later and see if I can tell which ones have washers and which ones don't
I do believe I left them out for the shorter/interior tools and just let them clump 
-
@Poncho65 said:
Could be to many washers
it has been so long since I did that mod that I forget which ones I left in 
I will try and check later and see if I can tell which ones have washers and which ones don't
I do believe I left them out for the shorter/interior tools and just let them clump 
Yeah it was my first time ever stacking a tool. Thought the washers were a requirement tbh. Might start dry stacking em from now on and checking the spacing before breaking my stones adding those stinking washers lol
Do you prioritize which tools you place washers between? In retrospect I probably did it completely backwards haha should've fed the pivot bolt through the main blade from the start to guarantee it gets a washer. I did it in reverse. And it's the only tool that DOESN'T have a washer beside it lol

-
Both long tools need washers to isolate them from the shorter tools and I believe that they may have to have a washer on the outside of the long tools as well

-
@Poncho65 said:
Both long tools need washers to isolate them from the shorter tools and I believe that they may have to have a washer on the outside of the long tools as well
Well dang. I thought I paid pretty close attention to where they were initially. Don't remember seeing them between the long tools and the frame, but looks like I have another long night of washer fiddling ahead of me lol
Gonna tear through the truck toolbox right now. Find some needle nose pliers. Trying to center them with a knife blade was irritating. Didn't even realize they had a D shape until the 3rd one haha
-
I will have to look. Been a while since I had one apart

Also, a paperclip bent straight will also help place tools and washers

-
Got a set of these tweezers at the Dollar store like 3 years ago lol they were too thin and cheap to use for any real purpose. That is . . . . . . until today! Where they will serve the REALEST of purposes haha

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login