The Hacked Leatherman Owners Club.
-
Thats the spirit. There is fun in learning to do things yourself not to mention the satisfaction. Yeah we save some money as well which is also pretty great. I enjoy all the modding that goes on here. I caught the bug a while back and had such a fun time working out all the kinks. The terrific members here with there support and pictures really helped a lot too. Now that you have a Dremil theres really no stopping you. -
/adds dremel to wish list...
-
@Aloha said:
Thats the spirit. There is fun in learning to do things yourself not to mention the satisfaction. Yeah we save some money as well which is also pretty great. I enjoy all the modding that goes on here. I caught the bug a while back and had such a fun time working out all the kinks. The terrific members here with there support and pictures really helped a lot too. Now that you have a Dremil theres really no stopping you.My wife. My wife will be stopping me lol
-
An excellent mod and very similar to the one I have

It amazes me how well the 2 different handles go together
Dremels are for sure an excellent tool to have when modding and have came in handy on a few other projects for me as well 
-
@Poncho65 said:
An excellent mod and very similar to the one I have

It amazes me how well the 2 different handles go together
Dremels are for sure an excellent tool to have when modding and have came in handy on a few other projects for me as well 
Did you end up with 6 tools on the one side? And if so did you end up having a spacing issue?
I only ended up using like 4 spacers I think. The thing is now a little wider than I had intended. I had a choice to either put the big spacer in (which seemed like a waste) or to add another tool. Thus the awl. But now the locking mechanism is half a hair from popping off as the pins that grab the frame are just a tad too short.
-
The lock tab will shift from left to right. Itching to pop out. But if I tighten it anymore the tools will clump too much or be too hard to open. I thought about removing some material from the inside bottom of the frame. Might give the tools a tiny bit more breathing room. I'd only need a couple millimeters I think.


-
@Obi1shinobee said:
very nice zoid ..
but fuse lock make biggerSooo I'm literally starting back at the beginning of the thread again and gonna read through. Now that I actually have some frame of reference
It's like watching a movie for the 2nd time lol Obi1 solved my problem on the 5th page
Now to just hunt down a fuse lock
-
My hacked Rebars look very similar to that and have never tried to pop put



-
@Poncho65 said:
My hacked Rebars look very similar to that and have never tried to pop put


Well you're the expert Ponch. I'll defer to your best judgment. What's my issue if you had to guess? Too many spacers? Maybe bent the frame a touch cramming in the tools? Short lock pins? I'm about to start tinkering in a bit. So I'll be trying some different things
-
Could be to many washers
it has been so long since I did that mod that I forget which ones I left in 
I will try and check later and see if I can tell which ones have washers and which ones don't
I do believe I left them out for the shorter/interior tools and just let them clump 
-
@Poncho65 said:
Could be to many washers
it has been so long since I did that mod that I forget which ones I left in 
I will try and check later and see if I can tell which ones have washers and which ones don't
I do believe I left them out for the shorter/interior tools and just let them clump 
Yeah it was my first time ever stacking a tool. Thought the washers were a requirement tbh. Might start dry stacking em from now on and checking the spacing before breaking my stones adding those stinking washers lol
Do you prioritize which tools you place washers between? In retrospect I probably did it completely backwards haha should've fed the pivot bolt through the main blade from the start to guarantee it gets a washer. I did it in reverse. And it's the only tool that DOESN'T have a washer beside it lol

-
Both long tools need washers to isolate them from the shorter tools and I believe that they may have to have a washer on the outside of the long tools as well

-
@Poncho65 said:
Both long tools need washers to isolate them from the shorter tools and I believe that they may have to have a washer on the outside of the long tools as well
Well dang. I thought I paid pretty close attention to where they were initially. Don't remember seeing them between the long tools and the frame, but looks like I have another long night of washer fiddling ahead of me lol
Gonna tear through the truck toolbox right now. Find some needle nose pliers. Trying to center them with a knife blade was irritating. Didn't even realize they had a D shape until the 3rd one haha
-
I will have to look. Been a while since I had one apart

Also, a paperclip bent straight will also help place tools and washers

-
Got a set of these tweezers at the Dollar store like 3 years ago lol they were too thin and cheap to use for any real purpose. That is . . . . . . until today! Where they will serve the REALEST of purposes haha

-
Those should work fine

-
I found reverse tweezers really good when dealing with the keyed washers and stacking tools.
-
@zoidberg said:
I found reverse tweezers really good when dealing with the keyed washers and stacking tools.
that would probably be the best. The most important thing was actually understanding what I was getting into tonight. And having the proper tools on hand. Only took like 15 minutes this time around lol I just think this particular tool combo is a little wide. I only put washers on the blade tonight. So 1 less than before, and that lock is still dancing a little. But hell with it. Gonna let it ride until it don't ride no more.Got my OG wave coming in the mail tomorrow. Can't wait to see how the original feels. Gonna be like Ralphie waiting by the mailbox for my decoder ring lol

-
Glad you got it back together and it didn't take as long

The more a person mods the more little tricks they figure put and it gets quicker and more fun as time goes on

I have a little side to side place in the lock tab but nothing concerning ;) I used that mod above lots when I first made it and have used it quite a bit this month in the Rebar 30 Day challenge and not had any problems

I think yours will be fine

-
If I may DD and Poncho; my Knifeless Rebar came from the factory with the lock bar from one of the handles rattling (side to side play), and no amount of chassis tweaking helped so, maybe this is because of factory/manufacturing tolerances. Has not hinder its perfomance a bit and this particular tool gets used regularly (although sometimes the play drives my OCD off the wall !!).
Like you said, "let it ride until it don't ride no more"!
Glad its working satisfactorily, and hope you enjoy your OE Wave; Happy Holidays!
BTW, I too have those dollar store tweezers set, and the reverse ones are the best for the anti clumping washers: enough pressure to hold them, and flexy enough as not to mar the surface or have them shoot across the room!
Happy Holidays to everyone.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login