Toolbox Challenge - January 2022
-
Day 5 :
I did not use anything but knives today (for eating, and opening parcels), so here is a Cobra 150 that was at an arm's length :)
-
DAY 5 No use, so I'll share a hack. If you think the 5" Cobra pliers aren't fun to pocket carry, try the 5" needle nose. This is my attempt to not have them rip through the bottom of my pocket. Step 1-steal your wife's reusable silicon straw. Step 2-cut off the end to match the jaws on the pliers. It's better, but a pocket or belt pouch is really the way to go.

-
Your hack is a lot more quick to get working than what I had to do when I decided to carry both these knipex in my handbag

-
Day 5
Only the knives were used today:

Well, I did use the pencil also, but forgot that when taking the picture.
-
@m47mu74nt said:
Your hack is a lot more quick to get working than what I had to do when I decided to carry both these knipex in my handbag
Quicker, but yours is much classier.

-
@Fireman said:
DAY 5 No use, so I'll share a hack. If you think the 5" Cobra pliers aren't fun to pocket carry, try the 5" needle nose. This is my attempt to not have them rip through the bottom of my pocket. Step 1-steal your wife's reusable silicon straw. Step 2-cut off the end to match the jaws on the pliers. It's better, but a pocket or belt pouch is really the way to go.
Neat trick

Hopefully your wife will be impressed also :D -
Great day of pics and carries, guys

-

There may only be 5 of us but this is turning into a very interesting challenge

I reckon because this one has taken some thinking about, as opposed to just knowing you’ll be carrying one specific MT for 30 days, we’re seeing more effort in uses, hacks, tips etc
-
Day 5
I am almost getting used to multiple tools sitting awkwardly in my pocket
I just used my knife today.
-
Southwire sells electrical products and tools. That particular knife has a D2 blade, which holds an edge pretty well but is only semi-stainless. Hence the BO treatment. They also sell it with drop point, hawkbill, and tanto blades
I need to get a couple more myself in case they quit selling it.
-
@Adam5 said:
Southwire EdgeforceSouthwire sells electrical products and tools. That particular knife has a D2 blade, which holds an edge pretty well but is only semi-stainless. Hence the BO treatment. They also sell it with drop point, hawkbill, and tanto blades
I need to get a couple more myself in case they quit selling it.
The sheepsfoot is what makes it extra cool to me
Thanks! -
Finally! I'm at a real computer again!
- ReamerPunch
- Adam5
- Echotech
- Fireman
- Fuzzy (thinking about it)
- Rich_SD
- Alan K. (maybe)
- Poncho65
- m47mu74nt
- Jothra

I happen to know I can get by with nothing in my pockets, as long as I have home advantage. For a variety of reasons I'd rather not get into, however, it's all me at work. If any of a million little things at work need doing, it will be me doing them. So here's my approximate, fluid loadout for the challenge:
Also pictured: the thing what's getting replaced!Clockwise from left:
[list type=decimal]-
The bladeless Free P2 I've been carrying lately. This is what I'm replacing with dedicated tools for the rest of the month.
-
My trusty stainless steel multi-driver. This was a Christmas gift in 1996. It's seen things both terrible and wonderful.
-
My Knipex Pliers Wrench XS. This thing is a minor miracle. The band holding the handles shut is from an old TPU watch strap.
-
My Spyderco Dragonfly 2. At school, this will likely get swapped out with a Spyderco Roadie. Also, whenever I feel like it, I may carry a Grohmann folder instead.
-
Scissors ripped from a donor Swiss Army Knife. I'll probably use proper scissors at work, but these ones will live on my keychain, so I can attack my fingernails when necessary.
This should be everything I need, but if not, tools abound in nature.
-
@Jothra said:
Finally! I'm at a real computer again!- ReamerPunch
- Adam5
- Echotech
- Fireman
- Fuzzy (thinking about it)
- Rich_SD
- Alan K. (maybe)
- Poncho65
- m47mu74nt
- Jothra

I happen to know I can get by with nothing in my pockets, as long as I have home advantage. For a variety of reasons I'd rather not get into, however, it's all me at work. If any of a million little things at work need doing, it will be me doing them. So here's my approximate, fluid loadout for the challenge:
Also pictured: the thing what's getting replaced!Clockwise from left:
[list type=decimal]- The bladeless Free P2 I've been carrying lately. This is what I'm replacing with dedicated tools for the rest of the month.
- My trusty stainless steel multi-driver. This was a Christmas gift in 1996. It's seen things both terrible and wonderful.
- My Knipex Pliers Wrench XS. This thing is a minor miracle. The band holding the handles shut is from an old TPU watch strap.
- My Spyderco Dragonfly 2. At school, this will likely get swapped out with a Spyderco Roadie. Also, whenever I feel like it, I may carry a Grohmann folder instead.
- Scissors ripped from a donor Swiss Army Knife. I'll probably use proper scissors at work, but these ones will live on my keychain, so I can attack my fingernails when necessary.
This should be everything I need, but if not, tools abound in nature.
Welcome aboard, Jothra

-

Birthday! Joy!I used the knife for knifey stuff. That's pretty much it, actually. So here's a picture of my loadout, only with the scissors in their temporary home on my keychain.

That weird socket thing is for my locking bike skewers. Please disregard. -

Not currently on my keychain but always around is my Bosch + Lomb 14x hand lens. It's a little small, but has exceptional lens quality. The one downside is it doesn't use bolts to hold the lens inside the handle. Instead, it's a kind of peened pin. So what to do when it's loose? You don't want to smash a magnifying glass with a hammer.
Pliers Wrench to the rescue!

The mechanical advantage of the Pliers Wrench is insane, so this worked marvellously.
Give 'em the clamps! -

Day four was another day of ordinary cutting, slicing, and snipping, and not much screw driving, pinching, or prying. So instead, here's a breakdown of my quarter-of-a-century-year-old multi-driver.

I don't think my grandparents expected this one to be such a winner.The body of the driver holds four bits, which are held in place by a plastic spacer (shaped like a straw) that runs along the length of the handle section. I can fit two more bits in the main and extender barrels. It came with two slot bits and two Phillips bits, so I dropped the least-used slot bit, and threw two Robertsons in there instead. Normally they would be #2 and #3, but I switched out for a #1 for a recent project, and forgot to switch it back. #2 is by far the most common, anyway. The slot bit is...I don't know, flat? The Phillips are #1, #2, and #3.
-
:ahhh
Jothra is here!
Welcome aboard! That screwdriver is awesome!
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login