Let me see your homemade sheaths!
-
That sheath is excellent. Well done.

-
@zoidberg said:
Looked through your pics... nice gears, did you make any of that jewellery?Thanks for looking and glad yuo liked it!

I made all of it. Jewellery was the first kind of stuff I started making.Thank you! It only took me two tries to make it -the leather I used for my first try was too so the retention was weak
-
@Jpac said:
I finally tried to make a wet molded sheath. Turned out nice enough -at the second try. The leather I used for my first try was too thin so it didn´t provide a good retention. On the second one I used thicher leather and the retention is really good.
IMG_20220113_134305~2 by juan pedro almeida, en FlickrWell done!

Hint: first wet mold the leather, only stitch it together afterwards. This prevents warping.
Looks like you did it this way.

-
I finally got round to ordering some new leather and making a new belt pouch. Specifically for a 3-4 layer SAK with the required additional thickness over my previous pouch. It's a horizontal pouch which is my preference, over built but then when you see the old version of this pouch (last pic) which has been on my belt almost every single day for 5 years (holy leather patina batman!), you can see why I like to build them strong! I built it a bit more simply than the previous one which had high end Horween leather, a fancier X stitch and had a smooth leather interior for an easier slide in and out but this one was me trying to work out if I still remembered how to make this model and I used a simpler Crazy Horse leather, simpler stitches, etc. It's not perfect by any means but it's more than sufficient till I have the energy to do it again in Horween with the posh stitching.




-
@pomsbz said:
I finally got round to ordering some new leather and making a new belt pouch. Specifically for a 3-4 layer SAK with the required additional thickness over my previous pouch. It's a horizontal pouch which is my preference, over built but then when you see the old version of this pouch (last pic) which has been on my belt almost every single day for 5 years (holy leather patina batman!), you can see why I like to build them strong! I built it a bit more simply than the previous one which had high end Horween leather, a fancier X stitch and had a smooth leather interior for an easier slide in and out but this one was me trying to work out if I still remembered how to make this model and I used a simpler Crazy Horse leather, simpler stitches, etc. It's not perfect by any means but it's more than sufficient till I have the energy to do it again in Horween with the posh stitching.



Nice one! Can't beat horizontal carry, my preference is slightly tilted. But I love the looks of the old worn one
@Jpac said:
I finally tried to make a wet molded sheath. Turned out nice enough -at the second try. The leather I used for my first try was too thin so it didn´t provide a good retention. On the second one I used thicher leather and the retention is really good.
IMG_20220113_134305~2 by juan pedro almeida, en FlickrWet molded looks so nice, it's sometimes hard to find the right thickness to let it have retention but still form nicely. Good work
[It's not failure if you learn something from it]
-
POMs the old leather sheath looks amazing all patina'd. I'm sure the new one will serve you just as well.
-
I hit the old one with some shoe polish and it's looking a lot better now. It's a trick I often use with belts to 'freshen' up their look.
-
Have been in need of a sheath that can carry either one of my big tools - Surge, ST300, Swisstool X.
Today the day came. Used the Victorinox and the Rebar sheaths for inspiration but made it all from one piece and used Chicago screws instead of rivets. Did not have a lot of time to spend so no colouring, no edge sanding and polishing, no protective waxes coating. But I made sure it’s sturdy and covered the metal pieces inside so they won’t scratch my tools. Overall pretty happy with the results.

-
Dang Davis, now that’s a sheath that will take the abuse and LAST! Nice job!
JR -
. With use it'll develop a nice patina. Well done. -
Great looking sheath Davis !

-
I ground this prybar out of a wrench and with the box cutting bevel it turned out somawhat pokey so I made it a little kydex sheath.
IMG_20220304_115807~2 by juan pedro almeida, en Flickr -
Cool idea. Nice sheath too. You'll need it with that sharp edge.
-
@Jpac said:
I ground this prybar out of a wrench and with the box cutting bevel it turned out somawhat pokey so I made it a little kydex sheath.
IMG_20220304_115807~2 by juan pedro almeida, en FlickrThis is super cool!
I was thinking of making a king of baby halligan on a similar base, but never did it -
That would be cool m47mu74nt.
-
[quote author=Aloha link=topic=74435.msg2323536#msg2323536 date=1646576646]
That would be cool m47mu74nt.
[/que]+1

-
Couple of sheaths I made.




-
Couple more


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login