Let me see your homemade sheaths!
-
I hit the old one with some shoe polish and it's looking a lot better now. It's a trick I often use with belts to 'freshen' up their look.
-
Have been in need of a sheath that can carry either one of my big tools - Surge, ST300, Swisstool X.
Today the day came. Used the Victorinox and the Rebar sheaths for inspiration but made it all from one piece and used Chicago screws instead of rivets. Did not have a lot of time to spend so no colouring, no edge sanding and polishing, no protective waxes coating. But I made sure it’s sturdy and covered the metal pieces inside so they won’t scratch my tools. Overall pretty happy with the results.

-
Dang Davis, now that’s a sheath that will take the abuse and LAST! Nice job!
JR -
. With use it'll develop a nice patina. Well done. -
Great looking sheath Davis !

-
I ground this prybar out of a wrench and with the box cutting bevel it turned out somawhat pokey so I made it a little kydex sheath.
IMG_20220304_115807~2 by juan pedro almeida, en Flickr -
Cool idea. Nice sheath too. You'll need it with that sharp edge.
-
@Jpac said:
I ground this prybar out of a wrench and with the box cutting bevel it turned out somawhat pokey so I made it a little kydex sheath.
IMG_20220304_115807~2 by juan pedro almeida, en FlickrThis is super cool!
I was thinking of making a king of baby halligan on a similar base, but never did it -
That would be cool m47mu74nt.
-
[quote author=Aloha link=topic=74435.msg2323536#msg2323536 date=1646576646]
That would be cool m47mu74nt.
[/que]+1

-
Couple of sheaths I made.




-
Couple more


-
That's some professional looking leatherwork, great job!
-
@GearedForwards said:
That's some professional looking leatherwork, great job!Thanks! Just a hobby (one of many). Just dove in with both feet. Youtube videos and a couple of convos with the guys at the local leather shop. Still need to learn a lot and refine my technique but it is coming along. Some decent tools helped a lot as well.
-
Never got my stitches that clean

Well done
-
@GearedForwards said:
That's some professional looking leatherwork, great job!+1

How do those slanted sheaths feel? I thought about getting one of those, but was affraid it wouldn't be very confortable when sitting down.

-
@m47mu74nt said:
Never got my stitches that clean
Well done
Same, even using one of those rolling tools to mark out and evenly space the stitches, I still never could..
JR -
I use a set of stitching irons to mark the stitch line which gives me a diamond shape to orient my awl. I don’t punch all the way through but only mark the surface and then finish the hole with awl while stiching. I scribe a light line on the leather as a guide for the irons.
There is also a bit of technique use when pulling the waxed thread. These are all saddle stitched so I am using two needles. I push the first needle through from the back side of the piece then cross the other needle behind it before pushing it through. Before pushing the second through I pull the thread from the first toward me so that the second needle rides behind that strand. When the second needle goes through I wrap the thread to the rear of of the stitch in an overhand motion. Then when I pull the thread tight I pull the backside thread away from me and slightly upwards and the front side thread toward me and slightly downward being careful to pull the thread to the same tension as I pull them tight.
-
@pfrsantos said:
+1

How do those slanted sheaths feel? I thought about getting one of those, but was affraid it wouldn't be very confortable when sitting down.

They are pretty comfy. I am still learning how to position them for max comfort but these pancake sheaths hug the belt line nicely. If the knife or tool is too high it can push a little into any lovehandles one might have. More slant will correct that. Really, they can be oriented for the users comfort to a certain degree. I try to keep the top of the knife/tool not much higher than the top of the belt. The bottom is dictated by the length of the knife. The bottom of the PM2 sheath pictured rides just at the top of my back pocket on a pair of jeans. Don’t even feel it sitting or standing.
-
I have the iron punches, but I also use one of these, after scribing the line you just start it off at one end and wheel it around and it evenly spaces where to stitch, works great when you have to do curves vs just straight lines,
JR
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login