Show off your Sak mod's!
-
Ok, I figured out the parts, and I found someone who had just the right parts rather then ordering multiple sak’s to do the job, so now I just have to wait for the parts to come in,,
JR -
Looking forward to seeing it.
-
Me too, still waiting for the status to change from the label created to the next step, yet it’s been two days,
JR -
as promised, i'm sharing 3D files for my custom scales from my last post. it includes a lot of variants: with two slots, with two slots+pin, pen and basic, all of them with screw/nut holes as well as with standard SAK snap-on mounting (I haven't tested those recently but before this it worked well on a previous version).
here it is: https://www.prusaprinters.org/prints/124359-sak-58mm-scales
-
@1g0rb said:
as promised, i'm sharing 3D files for my custom scales from my last post. it includes a lot of variants: with two slots, with two slots+pin, pen and basic, all of them with screw/nut holes as well as with standard SAK snap-on mounting (I haven't tested those recently but before this it worked well on a previous version).here it is: https://www.prusaprinters.org/prints/124359-sak-58mm-scales
I don’t 3D print, but that’s awesome of you to share!
I think the sincerest compliment would come from Victorinox, if they actually use your idea! Perhaps you should submit it to them? It would be nice if you got recognition directly from them.

-
@kamakiri said:
I don’t 3D print, but that’s awesome of you to share!I think the sincerest compliment would come from Victorinox, if they actually use your idea! Perhaps you should submit it to them? It would be nice if you got recognition directly from them.

thanks!
that's a really interesting idea to submit it to victorinox. i didn't even knew they accept ideas until i just found it on their site so thanks for mentioning that too :).
-
Ok who’s done it? I’ll admit I bought the whole kit like 25yrs ago but that was to blue a antique rifle, but for some reason I was kinda curious how many of you have used it on your sak? How long does it last for a edc?
I have that compact that I’ll be customizing, the extra parts came in and I was kinda thinking, what else can I do to add some flavor for it?
JR
-
Not 100% sure but don’t think it’ll work on stainless.
-
Devil is in the details.
Just cranking out some spacers.

-

I made my first Spydernox Mod today. It took a bit of work, and it is far from perfect. At least know what to do next time.

-
Sweet mod

-
91mm Walker with scorched wood scales (alongside 84mm)

-
The above was made with left over parts. It's grown on me but has schoolboy errors hidden:
- Pre-peening, the saw kept hitting the scale liner so I added an extra tool liner to provide clearance.
- The scale wood was Red Heart. I tried to scorch over a metal Swiss cross to leave an imprint in the wood. That didn't work, so ran a blow torch over the length of the scales, wire wooled them and waxed to cover up the error.
- I glued on the scale with the corkscrew closed. This pushed down the scale slightly so that it did not line up nicely with the scale liner. Liberal filing tidied things up.
Amateurish, but lessons learned.
-
I always add an extra liner if I am putting a saw next to a outside liner as, like you, I always find it eventually hits it and starts taking lumps out of the alu. The wood saws especially have a propensity to bend so I find the extra liner gives you that extra bit of leeway.
-
- Pre-peening, the saw kept hitting the scale liner so I added an extra tool liner to provide clearance.
I use blue painter's tape when I’m being careful, like with brand new or really old ones. Folded over the tool and sealed to itself is all it needs. That’s also what I do with leftover sharp parts that I store and organize with small zip locks.
-

Fresh from the kamakiri forge…

-
Lightweight Huntsman:
-
Wood scales
-
Old style scissors, screwed pivot, no back tool
-
Combo tool is a bit stiff, hopefully it will loosen up

-
-
@SAKTaschenmesser said:
Lightweight Huntsman:- Wood scales
- Old style scissors, screwed pivot, no back tool
- Combo tool is a bit stiff, hopefully it will loosen up
Very nice, did you make the wood handles ?
-
Noooo, way beyond the reach of my abilities.
From EBay, a Russian seller, I assumed they were Victorinox OEM.
Sent from my iPad using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
