What do we have on the way?
-
A minichamp to go on my work keys
-
This years LE Px: "Thunder Grey" (or Gray if you're from across the pond) ;) £75 :ahhh :ahhh :ahhh
-
Gen 2, 5" firebox stove set with all the bits and bobs to go with it that you can get.
And some 2mm stainless rod to make round pins/firesticks for clipping in a trangia gas burner if I want to. Firebox ones not sold in the UK, and would cost $18 to get posted. Cheaper to buy rod and make some.
-
I got to play with my new toy out in the snow just now! We’re suppose to get up to 12” and I went out now because I had to clean a space for the kid to park because we’re in a state of emergency so he can’t park on the street or else you get ticketed, that and the one sidewalk was like 4” of sludge, like applesauce, it’s suppose to drop onto the 20’s tonight so knowing my luck it would freeze and I’d be out there with a pick breaking everything up, anyway I must say this little guys a tank! Total power, shot everything long distance, and the blades turn so good it pretty much pulls it’s self!
JR
-
@MadPlumbarian said:
The one sidewalk was like 4” of sludge, like applesauce.That's a good analogy. Slushy snow is the worst to shovel!

-
Just ordered 5 Niteize HipClips from HH.
These have been U/A for ages in the UK (AFAIK) and at a fiver each I didn't want to miss out :ahhh
Does anyone have any experience with these on Alox SAK's & LM etc (didn't want to stir a long lost thread :whistle:)
Nite Ize UK | Innovative Solutions For The Everyday | Heinnie Haynes
Discover Nite Ize's innovative solutions to your everyday needs. From mini lights to cable tidys, Nite Ize has it all. Free UK delivery on orders over £30
(heinnie.com)
-
@SurgeUk said:
Just ordered 5 Niteize HipClips from HH.These have been U/A for ages in the UK (AFAIK) and at a fiver each I didn't want to miss out :ahhh
Does anyone have any experience with these on Alox SAK's & LM etc (didn't want to stir a long lost thread :whistle:)
Nite Ize UK | Innovative Solutions For The Everyday | Heinnie Haynes
Discover Nite Ize's innovative solutions to your everyday needs. From mini lights to cable tidys, Nite Ize has it all. Free UK delivery on orders over £30
(heinnie.com)
I think multiple users here have used them for Leatherman (e.g. Rebar) clips, but Alow seems a bit iffier, the stippling/texture and the engraving area would significantly reduce how much the clip was actually adhering to :think:
-
@GearedForwards said:
I think multiple users here have used them for Leatherman (e.g. Rebar) clips, but Alow seems a bit iffier, the stippling/texture and the engraving area would significantly reduce how much the clip was actually adhering to
<u>the stippling/texture and the engraving area would significantly reduce how much the clip was actually adhering to </u>
This was my concern, hence asking if anyone has experience of these
(still they're paid for now ::))I guess it's a wait and see sort of thing

-
A Kershaw Culpepper I ordered this evening. I should have it within 10 days. This is a large, single blade Barlow with a G10 handle. https://kershaw.kaiusa.com/culpepper.html
-
A Surge.
:ahhh
I had one once but I sold it because I didnt have uses to it and found it too bulky to carry around.
Now that Im building my house all by myself I can justify having one. Also I found a much cheaper seller than earlier.
Also my Skeletool just didnt prove to have enough horsepower to be a condtruction carry. Not so surprisingly.
-
Good luck with the Surge and the house build.
-
@Alan K. said:
A Kershaw Culpepper I ordered this evening. I should have it within 10 days. This is a large, single blade Barlow with a G10 handle. https://kershaw.kaiusa.com/culpepper.htmlMore Barehead Jack than Barlow but looks good

-
The Kershaw slippies seem like great value, they not long ago released a more premium USA mode model for folks that prefer that kind of thing

-
Finally, I've got something new on the way.
Ordered me a SOG PowerPint and a large Cattleman's Jack, from Marbles.
I'm pacing already. -
@GearedForwards said:
I think multiple users here have used them for Leatherman (e.g. Rebar) clips, but Alow seems a bit iffier, the stippling/texture and the engraving area would significantly reduce how much the clip was actually adhering to
I used them on a Rough Ryder Classic Carbon Series Folding Hunter pattern. They started to slip after a couple of months, and I used a piece of thick 3M double-stick mounting tape I bought from an auto parts store. Not given me a problem since.
-
Knipex Cobra and Pliers Wrench 10"

-
A trio of Opinels.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login