What do we have on the way?
-
@GearedForwards said:
I think multiple users here have used them for Leatherman (e.g. Rebar) clips, but Alow seems a bit iffier, the stippling/texture and the engraving area would significantly reduce how much the clip was actually adhering to
<u>the stippling/texture and the engraving area would significantly reduce how much the clip was actually adhering to </u>
This was my concern, hence asking if anyone has experience of these
(still they're paid for now ::))I guess it's a wait and see sort of thing

-
A Kershaw Culpepper I ordered this evening. I should have it within 10 days. This is a large, single blade Barlow with a G10 handle. https://kershaw.kaiusa.com/culpepper.html
-
A Surge.
:ahhh
I had one once but I sold it because I didnt have uses to it and found it too bulky to carry around.
Now that Im building my house all by myself I can justify having one. Also I found a much cheaper seller than earlier.
Also my Skeletool just didnt prove to have enough horsepower to be a condtruction carry. Not so surprisingly.
-
Good luck with the Surge and the house build.
-
@Alan K. said:
A Kershaw Culpepper I ordered this evening. I should have it within 10 days. This is a large, single blade Barlow with a G10 handle. https://kershaw.kaiusa.com/culpepper.htmlMore Barehead Jack than Barlow but looks good

-
The Kershaw slippies seem like great value, they not long ago released a more premium USA mode model for folks that prefer that kind of thing

-
Finally, I've got something new on the way.
Ordered me a SOG PowerPint and a large Cattleman's Jack, from Marbles.
I'm pacing already. -
@GearedForwards said:
I think multiple users here have used them for Leatherman (e.g. Rebar) clips, but Alow seems a bit iffier, the stippling/texture and the engraving area would significantly reduce how much the clip was actually adhering to
I used them on a Rough Ryder Classic Carbon Series Folding Hunter pattern. They started to slip after a couple of months, and I used a piece of thick 3M double-stick mounting tape I bought from an auto parts store. Not given me a problem since.
-
Knipex Cobra and Pliers Wrench 10"

-
A trio of Opinels.
-
I really like plain-edge sheepsfoot blades. Lots of cutting power, a strong tip, and they are safe enough to use in situations where you don't want to accidentally poke a hole in someone or something. Straight edge ones aren't offered often in one-hand opening. Most of what's still available is usually upper-scale in price.
I noticed Smith's had one, the Edgework Wharncliffe (which it is NOT); but for a company whose knife line isn't great (their main line is sharpening stuff) and the steel mystery metal of unknown heat treat (just listed as 400 Series); the $30 MSRP was ridiculous. Amazon had it on sale for $12, so I sprung for it at that price.
It's a framelock, which means it will be heftier than needed.

-
SwissTool MXBS (to go with the Spirit version) It was awlways going to happen ::)
Check this out: Swiss Tool MXBS
Victorinox Swiss Tool MXBS - 3.0326.M3N ++ Explore the world of perfect Swiss quality online ++ Home of the Original Swiss Army knife ++ Find a store close to you ++
Victorinox (www.victorinox.com)
-
@SurgeUk said:
SwissTool MXBS (to go with the Spirit version) It was awlways going to happen ::)Check this out: Swiss Tool MXBS
Victorinox Swiss Tool MXBS - 3.0326.M3N ++ Explore the world of perfect Swiss quality online ++ Home of the Original Swiss Army knife ++ Find a store close to you ++
Victorinox (www.victorinox.com)
The SwissTool MXBS will likely knock the mighty Surge off its high horse for me.
-
-
@cody6268 said:
I really like plain-edge sheepsfoot blades. Lots of cutting power, a strong tip, and they are safe enough to use in situations where you don't want to accidentally poke a hole in someone or something. Straight edge ones aren't offered often in one-hand opening. Most of what's still available is usually upper-scale in price.I noticed Smith's had one, the Edgework Wharncliffe (which it is NOT); but for a company whose knife line isn't great (their main line is sharpening stuff) and the steel mystery metal of unknown heat treat (just listed as 400 Series); the $30 MSRP was ridiculous. Amazon had it on sale for $12, so I sprung for it at that price.
It's a framelock, which means it will be heftier than needed.

I would pay $12 for that knife. Currently, it is $20.77 at Amazon. Just a bit more than I want to pay. I'll have to keep watch on it.
-
@cody6268 said:
I really like plain-edge sheepsfoot blades. Lots of cutting power, a strong tip, and they are safe enough to use in situations where you don't want to accidentally poke a hole in someone or something. Straight edge ones aren't offered often in one-hand opening. Most of what's still available is usually upper-scale in price.I noticed Smith's had one, the Edgework Wharncliffe (which it is NOT); but for a company whose knife line isn't great (their main line is sharpening stuff) and the steel mystery metal of unknown heat treat (just listed as 400 Series); the $30 MSRP was ridiculous. Amazon had it on sale for $12, so I sprung for it at that price.
It's a framelock, which means it will be heftier than needed.

Have you checked out the QSP Penguin?
-
@GearedForwards said:
Have you checked out the QSP Penguin?I had, but forgot about it. Going to pick up one quite soon. D2 is definitely more suitable for hard use than "mystery 400 whatever"
-
Even though I said that I was finished ordering Alox MiniChamps, I somehow have another on the way.
How this happened?
¯_(ツ)_/¯
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login