upcoming new SOG Multitool Spring 2022: Flash MT
-
Appreciate the heads up. Just bought one!
-
Glad to be of service. Hope this turns out to be a good tool for SOG. Look forward to your opinion of this new tool.
-
Thank you! Just got the Gerber Stake Out as well. Now waiting on the Gerber Dualforce!
-
I was able to get mine really fast because I live in the same state as Knife Center. I have my inital impressions up on YT.
I just really wish it hadn't been assisted..It feels like it creates more problems than anything. Even if its legal..its still not necessary.
-
@Maxlvledc said:
I was able to get mine really fast because I live in the same state as Knife Center. I have my inital impressions up on YT.I just really wish it hadn't been assisted..It feels like it creates more problems than anything. Even if its legal..its still not necessary.
I believe the assist was to make it more easy/reliable to deploy the blade with gloves and... it's the Flash, they're assisted.
What problems would being assisted create besides a small amount of resistance closing it?
-
I almost purchased this from the Knife Center, but I watched the video again and just realized that there is no screwdriver bit ready to go when you open the tool - it's always stored in the handle and you have to connect it to use it. I think that is a big miss in the design, and now I think I might pass on this tool. :(
-
@Rich_SD said:
I almost purchased this from the Knife Center, but I watched the video again and just realized that there is no screwdriver bit ready to go when you open the tool - it's always stored in the handle and you have to connect it to use it. I think that is a big miss in the design, and now I think I might pass on this tool. :(There is no way the tool could be designed like that...When the reactor was released it was returned often because the torque of the Driver twisted the frame and ruined the plier head connection. Although this is slightly more inconvenient, no more so than switching Skeletool bits. On top of that.I can easily open the Flash MT pliers one handed. I cant do that at ALL with the skeletool with any consistency. So definitely a give and take. I have other issues with the Flash MT, such as gear ratio...why not do the same as the PowerPint?? It would have made it SOOO much better imo.
-
This one is limited in functionality, and SOG "quality" has been so lacking that I am staying away from them for the foreseeable future. The only Challenge I have ever dropped out of was the SOG Power Access, which had wobbly tools that would inadvertently deploy past 180 degrees, a main blade so thin (edge to spin dimension) that I could have snapped it in half with my fingers, and a "file" that was as smooth as a baby's hind shanks.
In my view, SOG isn't even trying to make decent MTs any more. I bought a ton of SOGs back in the day, both knives and MTs, but they've been playing games with us for quite a while and it gets tiresome.
YMMV.

-
@Maxlvledc said:
There is no way the tool could be designed like that...When the reactor was released it was returned often because the torque of the Driver twisted the frame and ruined the plier head connection. Although this is slightly more inconvenient, no more so than switching Skeletool bits. On top of that.I can easily open the Flash MT pliers one handed. I cant do that at ALL with the skeletool with any consistency. So definitely a give and take. I have other issues with the Flash MT, such as gear ratio...why not do the same as the PowerPint?? It would have made it SOOO much better imo.But my Skeletool bit stays on the Philips head like 90% of the time. With the SOG, I would have to remove the bit from the holder, insert it in the driver, then remove it when done, then replace it in the holder... besides being inconvenient, that's a lot of opportunities to drop that little bit. :ahhh
-
I was going to say that if you dropped the bit, you would be screwed. And then I was going to say that I just made a driver pun. But that would be stupid, so I won't say it.
-
@powernoodle said:
I was going to say that if you dropped the bit, you would be screwed. And then I was going to say that I just made a driver pun. But that would be stupid, so I won't say it.
-
Just got my Flash MT today! Probably going to send it back. The knife blade rubs on the liner lock through the deployment (it's not smooth and sounds like it's grinding)... and yeah. Just don't see this replacing the skeletool.
-
@Rich_SD said:
But my Skeletool bit stays on the Philips head like 90% of the time. With the SOG, I would have to remove the bit from the holder, insert it in the driver, then remove it when done, then replace it in the holder... besides being inconvenient, that's a lot of opportunities to drop that little bit. :ahhhI mean..if you use the Philips that much, it makes perfect sense to go with the Skeletool, I can say from experience I've lost Leatherman bits while switching them..I bet this one is just as bad

@CK said:
Just got my Flash MT today! Probably going to send it back. The knife blade rubs on the liner lock through the deployment (it's not smooth and sounds like it's grinding)... and yeah. Just don't see this replacing the skeletool.This is what I was afraid of..bad QC. Curious to see how many more have this issue.
-
Discouraging.
So, during this meta-multitool craze age, it's all about Victorinox and Leatherman. -
I just ordered mine through Knife Center. I've been looking forward to this one since the reactor was discontinued. The bit holder on mine broke, they replaced it with a Poweraccess. I don't care for it, and I've really missed the reactor since. I mainly used the blade and pliers. I rarely used the screwdriver so I'm hoping the Flash MT is a hit
To be fair, the main thing I enjoyed was the form factor. It was so much easier to carry than the Skeletool. I'll check back in once it arrives. -
The Flash arrived yesterday. I'm going to carry it for awhile to really "review" it. But my initial impressions are somewhat confusing. Based on the pictures it's in a similar weight, size and thickness of the power access and the skeletool. The pliers do rub a little when opening or closing the tool, which isn't great. It's bigger than the reactor and fills the hand better.



Sent from my Pixel 6 using Tapatalk
-
The more I see about the SOG flash, the less I like it. The handle design is confusing and that really narrow small handle has me worried about durability. It probably operates comfortably due to the gear assisted pliers, but I'd be worried about breaking it. The assisted blade in a multitool seems like the wrong place to be trying to add value. What user pain point did they think they were addressing here? It would be faster to deploy than a LM tool due to the assist but whoops there's a fiddly safety here. Which you need because it's assisted.

The plastic and foam parts for bit retention - hard pass. That's going to break first and the bits will be lost forever.
All that said, this tool is hitting that size sweetspot of the LM Juice series. And, since LM refuses to make a tool in that size range again, if SOG is into that space, they deserve to reap whatever marketshare is being underserved there.
-
@bobartig said:
The more I see about the SOG flash, the less I like it. The handle design is confusing and that really narrow small handle has me worried about durability. It probably operates comfortably due to the gear assisted pliers, but I'd be worried about breaking it. The assisted blade in a multitool seems like the wrong place to be trying to add value. What user pain point did they think they were addressing here? It would be faster to deploy than a LM tool due to the assist but whoops there's a fiddly safety here. Which you need because it's assisted.
You're looking at this from the wrong perspective.
This isn't SOG setting out to make a multitool from the ground up to please fans, it's them making a multitool out of one of their best-selling knife models, that is iconic for being assisted.
If they made it the same but without the assist, it just wouldn't be a Flash.
-
@GearedForwards said:
You're looking at this from the wrong perspective.This isn't SOG setting out to make a multitool from the ground up to please fans, it's them making a multitool out of one of their best-selling knife models, that is iconic for being assisted.
If they made it the same but without the assist, it just wouldn't be a Flash.
I agree with the assist being unnecessary, but in practice it's been fine so far. It's my only assisted tool so I obviously prefer manual.
As far as the handle goes this is a very light use multi-tool. So I would not be expecting to cut fence wire with this thing, but simple pliers for when you need something around the office.
Sent from my Pixel 6 using Tapatalk
-
@bobartig said:
The more I see about the SOG flash, the less I like it. The handle design is confusing and that really narrow small handle has me worried about durability. It probably operates comfortably due to the gear assisted pliers, but I'd be worried about breaking it. The assisted blade in a multitool seems like the wrong place to be trying to add value. What user pain point did they think they were addressing here? It would be faster to deploy than a LM tool due to the assist but whoops there's a fiddly safety here. Which you need because it's assisted.
The plastic and foam parts for bit retention - hard pass. That's going to break first and the bits will be lost forever.
All that said, this tool is hitting that size sweetspot of the LM Juice series. And, since LM refuses to make a tool in that size range again, if SOG is into that space, they deserve to reap whatever marketshare is being underserved there.
The assisted opening addresses the issue of washers vs ball bearings in a knife that has a liner lock. Since each of these has their upsides and downsides when it comes to environment (durability in grit and grime, for example), the assisted opening alleviates the need for the designers to choose one or the other and still have the knife opening in a flash in most cases. When they have an assisted opening, it really doesnt matter how they construct the pivot. It's supposedly why SOG uses assisted opening in so many of their knives - it's so that they always open in a flash even when they are dirty. Then theres the Flash.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login