upcoming new SOG Multitool Spring 2022: Flash MT
-
I was going to say that if you dropped the bit, you would be screwed. And then I was going to say that I just made a driver pun. But that would be stupid, so I won't say it.
-
@powernoodle said:
I was going to say that if you dropped the bit, you would be screwed. And then I was going to say that I just made a driver pun. But that would be stupid, so I won't say it.
-
Just got my Flash MT today! Probably going to send it back. The knife blade rubs on the liner lock through the deployment (it's not smooth and sounds like it's grinding)... and yeah. Just don't see this replacing the skeletool.
-
@Rich_SD said:
But my Skeletool bit stays on the Philips head like 90% of the time. With the SOG, I would have to remove the bit from the holder, insert it in the driver, then remove it when done, then replace it in the holder... besides being inconvenient, that's a lot of opportunities to drop that little bit. :ahhhI mean..if you use the Philips that much, it makes perfect sense to go with the Skeletool, I can say from experience I've lost Leatherman bits while switching them..I bet this one is just as bad

@CK said:
Just got my Flash MT today! Probably going to send it back. The knife blade rubs on the liner lock through the deployment (it's not smooth and sounds like it's grinding)... and yeah. Just don't see this replacing the skeletool.This is what I was afraid of..bad QC. Curious to see how many more have this issue.
-
Discouraging.
So, during this meta-multitool craze age, it's all about Victorinox and Leatherman. -
I just ordered mine through Knife Center. I've been looking forward to this one since the reactor was discontinued. The bit holder on mine broke, they replaced it with a Poweraccess. I don't care for it, and I've really missed the reactor since. I mainly used the blade and pliers. I rarely used the screwdriver so I'm hoping the Flash MT is a hit
To be fair, the main thing I enjoyed was the form factor. It was so much easier to carry than the Skeletool. I'll check back in once it arrives. -
The Flash arrived yesterday. I'm going to carry it for awhile to really "review" it. But my initial impressions are somewhat confusing. Based on the pictures it's in a similar weight, size and thickness of the power access and the skeletool. The pliers do rub a little when opening or closing the tool, which isn't great. It's bigger than the reactor and fills the hand better.



Sent from my Pixel 6 using Tapatalk
-
The more I see about the SOG flash, the less I like it. The handle design is confusing and that really narrow small handle has me worried about durability. It probably operates comfortably due to the gear assisted pliers, but I'd be worried about breaking it. The assisted blade in a multitool seems like the wrong place to be trying to add value. What user pain point did they think they were addressing here? It would be faster to deploy than a LM tool due to the assist but whoops there's a fiddly safety here. Which you need because it's assisted.

The plastic and foam parts for bit retention - hard pass. That's going to break first and the bits will be lost forever.
All that said, this tool is hitting that size sweetspot of the LM Juice series. And, since LM refuses to make a tool in that size range again, if SOG is into that space, they deserve to reap whatever marketshare is being underserved there.
-
@bobartig said:
The more I see about the SOG flash, the less I like it. The handle design is confusing and that really narrow small handle has me worried about durability. It probably operates comfortably due to the gear assisted pliers, but I'd be worried about breaking it. The assisted blade in a multitool seems like the wrong place to be trying to add value. What user pain point did they think they were addressing here? It would be faster to deploy than a LM tool due to the assist but whoops there's a fiddly safety here. Which you need because it's assisted.
You're looking at this from the wrong perspective.
This isn't SOG setting out to make a multitool from the ground up to please fans, it's them making a multitool out of one of their best-selling knife models, that is iconic for being assisted.
If they made it the same but without the assist, it just wouldn't be a Flash.
-
@GearedForwards said:
You're looking at this from the wrong perspective.This isn't SOG setting out to make a multitool from the ground up to please fans, it's them making a multitool out of one of their best-selling knife models, that is iconic for being assisted.
If they made it the same but without the assist, it just wouldn't be a Flash.
I agree with the assist being unnecessary, but in practice it's been fine so far. It's my only assisted tool so I obviously prefer manual.
As far as the handle goes this is a very light use multi-tool. So I would not be expecting to cut fence wire with this thing, but simple pliers for when you need something around the office.
Sent from my Pixel 6 using Tapatalk
-
@bobartig said:
The more I see about the SOG flash, the less I like it. The handle design is confusing and that really narrow small handle has me worried about durability. It probably operates comfortably due to the gear assisted pliers, but I'd be worried about breaking it. The assisted blade in a multitool seems like the wrong place to be trying to add value. What user pain point did they think they were addressing here? It would be faster to deploy than a LM tool due to the assist but whoops there's a fiddly safety here. Which you need because it's assisted.
The plastic and foam parts for bit retention - hard pass. That's going to break first and the bits will be lost forever.
All that said, this tool is hitting that size sweetspot of the LM Juice series. And, since LM refuses to make a tool in that size range again, if SOG is into that space, they deserve to reap whatever marketshare is being underserved there.
The assisted opening addresses the issue of washers vs ball bearings in a knife that has a liner lock. Since each of these has their upsides and downsides when it comes to environment (durability in grit and grime, for example), the assisted opening alleviates the need for the designers to choose one or the other and still have the knife opening in a flash in most cases. When they have an assisted opening, it really doesnt matter how they construct the pivot. It's supposedly why SOG uses assisted opening in so many of their knives - it's so that they always open in a flash even when they are dirty. Then theres the Flash.
-
I appreciate innovation as much as anybody but SOG is not showing me the new and improved that I'm looking for. I know they're going for knife users who only might occasionally need pliers and drivers, but the PowerDuo I bought years ago still seems the better option over its replacements, the Reactor and now the FlashMT. The PowerDuo is essentially a Vic Adventurer without the awl, but with SOG's geared pliers added. What could be bad about that? It wasn't a great seller, and had problems with the scales cracking, so it was discontinued but I like it sitting on my desk where I use it or fiddle with it all the time and I wish SOG would fix the scales and bring it back. The fit and function from 10 years ago are excellent and every SOG back then came scary sharp. I don't know what happened to them.

-
re: the discussion on assisted opening. I have a reactor and it's downright dangerous. The lock is super easy to disengage. It goes "in" rather than "out" to unlock if that makes sense, so you can accidentally unlock it just by reaching into your pocket. I've had the reactor fly open just by dropping it. I would never carry it and I hope the lock is better on this one.
I am totally perplexed by the move to 4mm rather than standard bits. What a pita.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login