What did you just get?
-
@MadPlumbarian said:
Well my one model came in, so now I have the three bat cars and the signal, twice the Mrs ordered that and the wrong one came in so she ordered it from another site and it’s the right one!
JRThat's good to hear JR

-
Olight O'pry a titanium prybar with some 8mm bit storage and an inline driver, with some different hex wrenches. Reallllly liking it so far, great design and implementation, and the smiley face they made on the clip is cute.

-
@GearedForwards said:
Olight O'pry a titanium prybar with some 8mm bit storage and an inline driver, with some different hex wrenches. Reallllly liking it so far, great design and implementation, and the smiley face they made on the clip is cute.
Wow, that's gorgeous!

-
Just in!: my first SOG, its bit kit, and Gerber's leather sheath for my MP600 and its kit.
[attach id=0 msg=2328919]
-
The last model for a while at least nothing till Xmas,, mean I got like 30 to still do, I’ll have to do a count,, I’m kinda curious..
JR
-
37 total, yet 41 if you count the 4 extra cars in the train set,, so I got some work!
JR
-
@MadPlumbarian said:
37 total, yet 41 if you count the 4 extra cars in the train set,, so I got some work!
JRShow us how you're getting on with putting them together.

-
@pfrsantos said:
Show us how you're getting on with putting them together.

What the tools I use to do so?
JR -
@MadPlumbarian said:
What the tools I use to do so?
JRWas thinking more about seeing the several construction steps, to see it coming to life. Seeing what tools are used is interesting, too.

-
@pfrsantos said:
Was thinking more about seeing the several construction steps, to see it coming to life. Seeing what tools are used is interesting, too.

Ok, I’ll see what I can do, it’s just a little hard to hold the two pieces together, then hold a tool, yet then hold a camera,, but I’ll see what I can come up with, I mean when I’ll do the next one idk cause anyone takes 2-8+hrs, it also takes like 10-15min to setup every time, get in the chair, get the wood desktop setup out, get the tools setup, get the glasses, get the lamp aligned, and everything all perfect before grabbing the model and even starting, and when, idk cause I have to go around the Mrs “I want to do” and well that changes daily just like our weather! lol
JR -
How’s this? It was a little hard getting a clear pic while holding the model, the tool, and the camera which is my iPad, half the time it didn’t want to focus on the part but the table in the background.. but here’s how I do the basics you got to get the little tab in the slots, in most cases you twist them with a mini pair of pliers but in some cases if it’s a display part you have to bend so it doesn’t stick out, just like the parts most are kinda a simple bend but sometimes you have to roll or form them, in this case I used a ruler case and a marker cause they were the perfect size, if bigger or smaller you just find something bigger or smaller! Anyway time for step two.. any other questions ask away!
JR
-
All done, that was kinda fun yet easy, a couple hard bends,, but alls wrapped up, here’s the little tool chest, a plastic ammo can but with a tray I made so the pliers stand upright, with a few other odd tools, like that red one I use all the time which is a leather working tool, I used to do some but I found it works at bending the tabs over in the little hard to reach places,, and that funky blue one, that’s a story in itself, I got the idea from an old school auto body detailing tool and I figured if I add a few things to it that I might be able to get just about any curve I needed to bend, yet someone on here helped me out by taking it from me drafting it and making it 3D into a computer layout, and then I had it printed or whatever you call it, I got to get another but in smaller size to help with the ratio,,
JR


-
Nice shots, JR. And the finished model looks pretty cool.
After thinking USPS misdelivered them or was careless in delivering them to me, my Opinel trio arrived today!

[attach id=0 msg=2329339]

-
@MadPlumbarian said:
How’s this? It was a little hard getting a clear pic while holding the model, the tool, and the camera which is my iPad, half the time it didn’t want to focus on the part but the table in the background.. but here’s how I do the basics you got to get the little tab in the slots, in most cases you twist them with a mini pair of pliers but in some cases if it’s a display part you have to bend so it doesn’t stick out, just like the parts most are kinda a simple bend but sometimes you have to roll or form them, in this case I used a ruler case and a marker cause they were the perfect size, if bigger or smaller you just find something bigger or smaller! Anyway time for step two.. any other questions ask away!
JRYup, that's what I meant. How the little pieces come together, those little tricks to form/shape them. Pretty cool photos, thanks!

-
Something to add to my electrical MT collection:

-
@MadPlumbarian said:
All done, that was kinda fun yet easy, a couple hard bends,, but alls wrapped up, here’s the little tool chest, a plastic ammo can but with a tray I made so the pliers stand upright, with a few other odd tools, like that red one I use all the time which is a leather working tool, I used to do some but I found it works at bending the tabs over in the little hard to reach places,, and that funky blue one, that’s a story in itself, I got the idea from an old school auto body detailing tool and I figured if I add a few things to it that I might be able to get just about any curve I needed to bend, yet someone on here helped me out by taking it from me drafting it and making it 3D into a computer layout, and then I had it printed or whatever you call it, I got to get another but in smaller size to help with the ratio,,
JRNicely illustrated and the USPS truck is super cool
. A good design with a lot of details. Even included the left side blind spot mirrors for right hand side driving. And like your DIY pliers stand with Zip Ties 
-
@rishardh said:
Nicely illustrated and the USPS truck is super cool
. A good design with a lot of details. Even included the left side blind spot mirrors for right hand side driving. And like your DIY pliers stand with Zip Ties 
Thanks, I kinda got the idea from something like this, I mean it’s pretty much a trimmed 2x4 with holes drilled for the handles, but I wasn’t paying for something like that and I didn’t have any wood at the time so I had a simple $1 tray and a ton of zip ties, you just have to make sure put a support in the middle or else the plastic tray would just collapse,, although now that I have a bunch of 2x4’s maybe I should make a more advanced one to hold the tools I really like then drill smaller holes for the pen like tools so then don’t just fall over?

JR
-
I just got a Mora Eldris, a Schrade mini stockman, and a paracord fob in from Farmer X. I opened the package with my Champion, of course, due to being in the March of Champions Challenge. The Eldris is smaller than I thought it was going to be, but I think it will punch above its weight class for an EDC fixie. The Schrade mini stockman is perfectly sized for fifth pocket carry.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
