The Hacked Leatherman Owners Club.
-
Can't remember if I already posted this pic of not
:D
-
Now that is a nice tool config 8) :o

-
Color swapped ST300 with a BO Bit Adapter



-
Thanks Adam

-
That wasn't a complement. It was a demand


-
Thanks Steve

-
Those long flat bits are very handy

-
I hope this video helps anyone that is wanting to try and build a Charge Knife



-
Hi guys,
my lightweight Multitool (6 ounces) always with me at the moment.
Frame: Fuse and Kick
Screwdrivers: PST (mod), Rebar, Rev (mod)
Scissors: Wave (handle mod)
Magnet outside and inside to hold needle and tweezers

-
... and my other mixtool.
Grinded the pivot holder of the wave frame to put the tweezers in.
Also Grinded a 300mm metal saw blade


-
Some very excellent mods you have there, Ledernox :o

Love how you put Kick and Fuse handles on the same tool and the half Rebar/Wave tool looks cool as well

-
Just a dual color ST300 from me today


-
Inspired by Poncho, who posts this Charge knife a lot :D and the topic Adam recently started I needed to make myself a half-ed Leatherman. I already had the halfRev, which worked pretty decent but I don't really like the blade on it. So I wanted a broken Wave to take apart, Charges keep high prices and are much harder to find around here. So I found a Wave with busted pliers, according to the seller the other things were fine. Price was about 1/3 of new Wave so I thought the deal was good. It got here in the poorest condition I've ever seen a tool. Pretty much everything in it needed work, but at least there was enough metal left. Oh, and it was an older second Gen so it had security Pentagram, rather than torx. So I had to buy two sets of security pentagram bits, at pretty penny at the local big box store. The saw was the worst - someone that thought a saw just needs to have some random pieces sticking out of it used a Dremel in an attempt to sharpen it. Looked more like Victorinox's scaling tool than actual saw. Took me 1 1/2 of hand work with trialgle files to make it look like a saw and work like a saw again. Plain edge was decent, just sharpened on something really coarse and needed some finer grits. Wanted the inside tools to be the bit exchanger and the scissors, as Ponchos, but it seems like the Wave handle is built differently. So when I moved the bit holder to the other side to make space for the scissors - the exchanger would not hide fully into the handle. I could grind whatever is in the way off but it was getting pretty late and I did not want to risk it so I just assembled it with the can opener instead. And I do use the opener - as a scraper, to poke things, as a package opener (I did sharpen it a bit), the wire stripper also gets used.... So it's staying in this configuration for now. First impressions are : using the screwdriver is so much more comfortable that way, the knife is more comfortable too but also needs a bit more attention closing because of the slim handle. :)

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





