The Hacked Leatherman Owners Club.
-
Thanks Adam

-
That wasn't a complement. It was a demand


-
Thanks Steve

-
Those long flat bits are very handy

-
I hope this video helps anyone that is wanting to try and build a Charge Knife



-
Hi guys,
my lightweight Multitool (6 ounces) always with me at the moment.
Frame: Fuse and Kick
Screwdrivers: PST (mod), Rebar, Rev (mod)
Scissors: Wave (handle mod)
Magnet outside and inside to hold needle and tweezers

-
... and my other mixtool.
Grinded the pivot holder of the wave frame to put the tweezers in.
Also Grinded a 300mm metal saw blade


-
Some very excellent mods you have there, Ledernox :o

Love how you put Kick and Fuse handles on the same tool and the half Rebar/Wave tool looks cool as well

-
Just a dual color ST300 from me today


-
Inspired by Poncho, who posts this Charge knife a lot :D and the topic Adam recently started I needed to make myself a half-ed Leatherman. I already had the halfRev, which worked pretty decent but I don't really like the blade on it. So I wanted a broken Wave to take apart, Charges keep high prices and are much harder to find around here. So I found a Wave with busted pliers, according to the seller the other things were fine. Price was about 1/3 of new Wave so I thought the deal was good. It got here in the poorest condition I've ever seen a tool. Pretty much everything in it needed work, but at least there was enough metal left. Oh, and it was an older second Gen so it had security Pentagram, rather than torx. So I had to buy two sets of security pentagram bits, at pretty penny at the local big box store. The saw was the worst - someone that thought a saw just needs to have some random pieces sticking out of it used a Dremel in an attempt to sharpen it. Looked more like Victorinox's scaling tool than actual saw. Took me 1 1/2 of hand work with trialgle files to make it look like a saw and work like a saw again. Plain edge was decent, just sharpened on something really coarse and needed some finer grits. Wanted the inside tools to be the bit exchanger and the scissors, as Ponchos, but it seems like the Wave handle is built differently. So when I moved the bit holder to the other side to make space for the scissors - the exchanger would not hide fully into the handle. I could grind whatever is in the way off but it was getting pretty late and I did not want to risk it so I just assembled it with the can opener instead. And I do use the opener - as a scraper, to poke things, as a package opener (I did sharpen it a bit), the wire stripper also gets used.... So it's staying in this configuration for now. First impressions are : using the screwdriver is so much more comfortable that way, the knife is more comfortable too but also needs a bit more attention closing because of the slim handle. :)

-
Great job, Davis

My bit driver sticks up just a bit because I wanted the scissors in them. I tried to cut a small section out of the bit driver in my first one but didn't bother on the second one and it actually makes the bit driver more accessible

-
Already used it a ton today and I like the tool set as is - the opener was used to unpack a tricycle for the toddler. The thing was in more pieces that I imagined and each one was packed separately in plastic :o so it had a workout. The screwdriver was used a lot during assembly. No pictures as I got a bit frustrated with the work, sometimes I can swear that the producers of such things intentionally make the instructions vague or plain incorrect. And you DO need instructions, some of those things are pretty complicated.
Later I finally got to patch the front tire of my bicycle and took it around the block for a quick ride. Used the screwdriver on the new tool to adjust the brakes.
So far so good
-
Glad it has seen some great usage already

My 2 favorite things of mine really is the screwdriver and the blade, so you have the best things (in my view) left in

-

I made this for my former apprentice and friend. He is 32 years my junior, but we get along very well. He has talked me into going to a concert with him, and he is buying the tickets. This is how I am paying him back.
I asked him what he thought would make a near perfect MT for an electrician. I used his comments as a guide, but also included a couple of things that I knew would be useful. Personally, I would replace the serrated blade/flat head screwdriver with the driver from a Center Drive, but I neither had one nor wanted to buy one in order to rob the driver.
He thinks it looks great, but I don't think he suspects I am giving it to him :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




