Titanium?
-
Not sure if that’s info for the OP gone MIA?
But yes, actually many common knife materials have issues when un or under-lubricated. Stainless on stainless has a huge coefficient of friction dry. Even when highly polished. But nobody makes a big deal about it and we all know to oil our knives. So unless there’s some other unknown about stainless and titanium interactions, I don’t think any of this side discussion relates much to the machining, cutting or shaping titanium.

Seems like there’s enough myth and mystery about working with it.
I recently got an alox scaled knife that’s over 50 years old. Good shape but locked up pretty bad. Just needed a good lube and operation to work all or enough of the oxides out for proper operation and snap. Care was only needed to prevent the aluminum oxide from marring the stainless while dry. Because that is a material that’s significantly harder than SAK stainless.
Is anyone claiming that lubrication doesn’t fix or prevent galling issues between Ti alloys and stainless?
-
Just to make the point…even this ragged old SAK metal saw from 1958 is capable of cutting grade 5 titanium. Just used to notch these marks, but Ti isn’t hard as many seem to think.



-
True. I say it’s more like aluminum “gummy”. But I don’t have any pure Ti to test. That stuff is expensive for pure. Nope not me lol
-
Hi, I'm back :)
I set up my mill with a mist coolant system, and a vacuum duct to suck it up so it wouldn't make a mess. That took a while, but it's working well; when I get done cutting, the tool is still cool.I've been experimenting with 7075-T6 and did some tests; this is my first attempt at machining titanium.
This is the first step: I have managed to drill and countersink the screw holes, and cut out the outline of the scales, and radius the edges. I have the tool slots programmed, but I haven't cut them as yet, that's the next step.
[attach id=0 msg=2335593]
This still isn't quite right as the screw holes are not coming out clean, but I'll make some adjustments.
-
Nice progress.

-
Looking good :) What kind of milling machine do you use? Any special titanium tools or cutters?
-
Hi Vidar
I am machining on what is mostly a Sherline 2000; although the differences (between mine and a stock model 2000) are for increased work envelope and don't affect these nice and small pieces.
I'm using carbide endmills, TiAlN or AlTiN.The parts that cut properly were a 1/4" 2 flute, and a 3 flute 1/8" radius endmill.
The screw holes were cut with an uncoated endmill, but I don't really think the problem was because of the lack of coating. -
Interesting.
I have't milled titanium as there has never been a use for that around here. Is it a bit gummy like aluminium or more steel like?
-
Well... I gotta say, I used the same G-code on the titanium there, that I used successfully on the 7075; and the screw holes came out the correct size in the aluminum; but they are undersize here.
So; ya, titanium, living up to its reputation.
I have a couple of ideas to try. -
Progress update: worked out the screw holes.
Not much progress, but some.Haven't cut the tool slots yet.
Pretty well decided to use standard-factory size pivot pins all the way around; with ... probably only one of the ones in the middle with a M1.6 screw in it; the other going into blind holes in the scale. Y'know, like ... everybody else

This one in this picture is drilled out with 2.5mm pivot pins and M2 screws all around.

-
Nice job, looks awesome !

-
Wow, that looks neat! Keep us posted

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login