PST, PST II Owners Club
-
Welcome the

First question you can put washers by the blade same as the file and it maybe should have already had at least 1 by it
if the bronze washers are thin enough then yes it would be fine 
A 3D Printed bit holder would be awesome but I don't know the dimensions of those bits

As for question 3, you can try to bend it but there is always the chance (and a very good chance unfortunately) that it will snap off instead of bend :ahhh so do that at your own risk :ahhh
No idea about different pivots unfortunately but perhaps someone will come along that does know

Thw handles are likely just 420 stainless and although tough, they can be engraved
files will also be able to be used and can cut grooves in them 
I hope I was some help

-
Great pic, Steve

-
Thanks !

-
Hi all. I got a PST II from the antique store last weekend and cleaned it up alright but the k ife blade doesn't have much for "walk and talk", as in it stays open mostly but is very easy to close. Any suggestions on fixing this? I guess it's kind of a non issue if I use it with the handles closes but figured I'd ask anyway. Thanks a lot.
-
@Jedula said:
Hi all. I got a PST II from the antique store last weekend and cleaned it up alright but the knife blade doesn't have much for "walk and talk", as in it stays open mostly but is very easy to close. Any suggestions on fixing this? I guess it's kind of a non issue if I use it with the handles closes but figured I'd ask anyway. Thanks a lot.G'Day,
Congrats on an excellent Leatherman, one of my favourites. Is it just the knife blade that is loose, or all the tools on that pivot? It may be a pivot bolt that needs some tightening. Post a pic or two and it may be easier to help with a fix. If it is the pivot bolt, you may need to invest in some Leatherman specific tools from one of our inmates. Two small pliers with fine teeth can be used in a pinch, but it may mark / damage the pivots.
Cheers, Pete
-
with pieter 
Welcome back to
and congrats on getting a PST II, Jedula

-
Thanks guys, I took it apart to clean and the pivot is tight with no side to side movement. Just the knife seems to not want to be held open by the spring properly. I can't seem to figure out adding pictures for some reason.
-
The pics have to be under 512kb or you can upload to a photo sharing site like Imgur and put the pic link

Could possibly be a deformed area on the knife causing it not to engage properly

-
Think I figured out the pictures. Here we go.
.jpg)
.jpg)
.jpg)
.jpg)
-
@Jedula said:
Hi all. I got a PST II from the antique store last weekend and cleaned it up alright but the k ife blade doesn't have much for "walk and talk", as in it stays open mostly but is very easy to close. Any suggestions on fixing this? I guess it's kind of a non issue if I use it with the handles closes but figured I'd ask anyway. Thanks a lot.How much detent do the other tools in that handle have? It is either wear on the knife blade as Poncho suggested, or the backspring has lost a bit of tension. In either case, the solution is probably removing the tools and bending the backspring a little bit.
Congratulations on the PST II

It is a nice tool whether the blade has much detent or not -
Thanks again all, I'll take it apart and try bending the spring in a little.
-
Took it apart and bent the spring a little. Worked like a charm. Thanks for all the advice fellas. Much appreciated.
.jpg)
-
Glad you got the problem fixed

Looks great as well 8)

-
Good morning,
I recently acquired a PST (0996) in mostly good shape. The tools are pretty rusty and open with difficulty after a healthy oiling. I’d like to take it apart and give it a more thorough clean, but I really don’t want to foul up the process. Is there a good guide for someone who doesn’t have a whole metal shop in their garage? Or am I better off sending it to Leatherman? Thanks.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
