What Did You Use Your Multitool For Today?
-
Yep, not fun for sure. And no matter how experienced and careful you are - no one is immured from accidents. Last summer I had one go in with the barbel for the first time in the about 15 years I've been actively fishing. It went in a finger tip and it hurt awful, having a pliers ( Wave I believe it was) allowed me to take it out and continue my adventures.
Here is what I carried today : A Rebar, a current tester and a Case 18 Stockman.

The Rebar was used because of a reason I never would imagine might occur - my hands were wet pretty much all day (more on that later on) which led to my fingernails become unstably soft. I tried to open an energy drink can and my nails just bend without even moving the tab :o So I took out the Rebar thinking I'd open a flat head or the can opener and "pry" it open. Guess what - I could not do that with my slimy nails either
What I could access was the pliers function and it did the job too. No pictures of that, I was too shocked :DThe case saw a ton of work today. Cleaned and sliced about 60 pounds of tomatoes for canning. All done with this knife. Lately I've learned that small blades carry tons of utility in certain tasks. In the beginning of the summer I used the spay blade on in to clean 15 pound of cherries for the freezer.


And here comes the current tester need. After you can food you usually need to boil jars in order to vacuum the cap. My redneck engineer arse that came out with that device out of an ancient washing machine and a huge portable heater did not want to get electrocuted.


It was a ton of work but healthy and delicious food is worth it. Next farmer's market is Wednesday so I'll probably make some more then.
-
Today was the Signal; the opener took care of opening /loosening the staples, the pliers detached them from the box, and the knife took care of the box to be recycled. [attach id=0 msg=2368288] [attach id=1 msg=2368288]



-
And here it is taking a break ...
[attach id=0 msg=2368289]
-
@DavisNikolov said:
Yep, not fun for sure. And no matter how experienced and careful you are - no one is immured from accidents. Last summer I had one go in with the barbel for the first time in the about 15 years I've been actively fishing. It went in a finger tip and it hurt awful, having a pliers ( Wave I believe it was) allowed me to take it out and continue my adventures.Here is what I carried today : A Rebar, a current tester and a Case 18 Stockman.

The Rebar was used because of a reason I never would imagine might occur - my hands were wet pretty much all day (more on that later on) which led to my fingernails become unstably soft. I tried to open an energy drink can and my nails just bend without even moving the tab :o So I took out the Rebar thinking I'd open a flat head or the can opener and "pry" it open. Guess what - I could not do that with my slimy nails either
What I could access was the pliers function and it did the job too. No pictures of that, I was too shocked :DThe case saw a ton of work today. Cleaned and sliced about 60 pounds of tomatoes for canning. All done with this knife. Lately I've learned that small blades carry tons of utility in certain tasks. In the beginning of the summer I used the spay blade on in to clean 15 pound of cherries for the freezer.


And here comes the current tester need. After you can food you usually need to boil jars in order to vacuum the cap. My redneck engineer arse that came out with that device out of an ancient washing machine and a huge portable heater did not want to get electrocuted.


It was a ton of work but healthy and delicious food is worth it. Next farmer's market is Wednesday so I'll probably make some more then.
A job well done indeed [emoji1303]
-
Spirit came in handy yesterday. Our parking lot sign got badly covered by constantly growing wild grape, so I used the main blade to uncover the sign

Turns out it was not really held in place by anything - so I used zip ties and trimmed the excess with wire cutters - super smooth [emoji1303][emoji2]

-
Very nice alexanderre

-
Package opener day [emoji403]
Used it to first open the box - totally love that I never have to worry about damaging anything inside

Then cut open my cherry flavored Animal Flex , cause my joints were really begging for it this time [emoji1320]

-
@alexanderre said:
Cut open my cherry flavored Animal Flex , cause my joints were really begging for it this time...I can empathize. I have suffered with knee pain my entire adult life.
Glad to see you're still hanging in there!
-
@Farmer X said:
I can empathize. I have suffered with knee pain my entire adult life.Glad to see you're still hanging in there!
Thank you my friend [emoji1317]
well I’m ok for the most part - it’s just that I work out quite a bit and it causes a serious amount of joint stress, so I take Flex from time to time - at least twice a year would be good, every three months even better [emoji1316]
-
Used my Vic Cheese Master SAK to eat some fried diced Italian sausage along with my fried egg sandwich(on Dave’s Killer bread-“Good Seed”)

-
Used my LM Brewzer to open my Mtn Dew Kickstart. Dont have finger nails, so that worked good.
Sent from my SM-A326U using Tapatalk
-
Our kitchen water heating tap has gone bad - again - and it was time to buy a replacement - again. Sadly those Chinese cehapos only last for about a year. Anyway - was about to use two of my favorite ones for the job, but frankly speaking Spirit did cover all the bases with just its flathead screwdriver - perfect for the electrical works [emoji1303]

-
Great use and great tools, alexanderre

-
Spirit X had a busy day yesterday.
Fixed a squeaky door handle - took me a few minutes to figure a root of the problem, but nothing a WD40 can’t solve 🙌🏻
Thought it was the mechanism inside, but turns out the handle itself rubbed against the main plate or actually both of the handles on both sides 😆


-
The scissors on the Super Tinker got used to open some food packaging. Scissors and Awl on the Spirit got used at a bike ride event yesterday. The awl poked two new holes on someone's number bib and the scissors cut the zipties after they were fastened.
Also, the scraper/package opener on the Spirit is worth the price of admission alone on that thing. I've used that probably the most out of all the Spirit tools.
-
Snack time!!!


-
While we’re back to our western temporary rented apartment we bought a cheapo electrical kettle that started rattling just days after purchase.
Disassembled it with a Spirit and found a loose nut 😆
Used pliers to tighten it up and Phillips obviously
to assemble the kettle back. Worked as expected ✅(though Swiss Champ or Work Champ pliers would have been more convenient in this particular situation 🤔)


-
Great uses

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
