What Did You Use Your Multitool For Today?
-
@alexanderre said:
Cut open my cherry flavored Animal Flex , cause my joints were really begging for it this time...I can empathize. I have suffered with knee pain my entire adult life.
Glad to see you're still hanging in there!
-
@Farmer X said:
I can empathize. I have suffered with knee pain my entire adult life.Glad to see you're still hanging in there!
Thank you my friend [emoji1317]
well I’m ok for the most part - it’s just that I work out quite a bit and it causes a serious amount of joint stress, so I take Flex from time to time - at least twice a year would be good, every three months even better [emoji1316]
-
Used my Vic Cheese Master SAK to eat some fried diced Italian sausage along with my fried egg sandwich(on Dave’s Killer bread-“Good Seed”)

-
Used my LM Brewzer to open my Mtn Dew Kickstart. Dont have finger nails, so that worked good.
Sent from my SM-A326U using Tapatalk
-
Our kitchen water heating tap has gone bad - again - and it was time to buy a replacement - again. Sadly those Chinese cehapos only last for about a year. Anyway - was about to use two of my favorite ones for the job, but frankly speaking Spirit did cover all the bases with just its flathead screwdriver - perfect for the electrical works [emoji1303]

-
Great use and great tools, alexanderre

-
Spirit X had a busy day yesterday.
Fixed a squeaky door handle - took me a few minutes to figure a root of the problem, but nothing a WD40 can’t solve 🙌🏻
Thought it was the mechanism inside, but turns out the handle itself rubbed against the main plate or actually both of the handles on both sides 😆


-
The scissors on the Super Tinker got used to open some food packaging. Scissors and Awl on the Spirit got used at a bike ride event yesterday. The awl poked two new holes on someone's number bib and the scissors cut the zipties after they were fastened.
Also, the scraper/package opener on the Spirit is worth the price of admission alone on that thing. I've used that probably the most out of all the Spirit tools.
-
Snack time!!!


-
While we’re back to our western temporary rented apartment we bought a cheapo electrical kettle that started rattling just days after purchase.
Disassembled it with a Spirit and found a loose nut 😆
Used pliers to tighten it up and Phillips obviously
to assemble the kettle back. Worked as expected ✅(though Swiss Champ or Work Champ pliers would have been more convenient in this particular situation 🤔)


-
Great uses

-
This time around I brought my Telecaster and my new-to-me yet needing quite a few fixes Fender Champ 600 to the western part of Ukraine while it’s kinda hot in Kyiv.
I also brought a few stompboxes - one of them is my kinda mojo - EHX Holystain - a Big Muff fuzz + some cool effects.
I bought it about 15 years ago and didn’t play much lately - I quit serious music about 5 years ago and didn’t touch it since then.
To my surprise it was in a pretty awful shape - noisy pots and switches disrupted the last bits of inspiration I still manage to acquire [emoji23].So today I finally had time to go get all the necessary stuff and time to disassemble and clean it up.
Used Spirit all the way - first the cap lifter to pry away the knobs they were too stiff to be removed with the bare hands- trust me, I really tried [emoji38]

Then I used pliers to remove the top nuts - didn’t cover the plier head with any insulation to avoid scratches since those nuts have washers.

As I approached the foot switches I did cover the pliers with insulating tape and indeed managed to avoid scratches (for the most part [emoji23]).

And then finally I flipped the case over to unscrew the bottom cover with a phillips screwdriver.

Then it was time to remove the main board - to do so I had to unscrew the input/output jacks with the pliers first.

And there it was - accessible and ready to get its first spa in 15 years [emoji23]

I removed the metal cover of each of the two foot switches with Spirit’s flathead screws and sprayed a WD40 Contact Cleaner inside of it.


Then I did the same cleaning procedure for each of the pots - gosh they were hard to turn at first but gave in a few moments after I sprayed their internals.

As a result I got a perfectly working pedal that sounds awesome and is ready to rock now whenever I am [emoji1591]
Now I need to get back home where I have a decent Hakko soldering station and replace a malfunctioning volume pot on my Champ 600, but that’s another story [emoji1316].
-
Well done alexanderre, great pictures

-
My abilities to fix that stompbox would be questionable (I'm much better with things mechanical). Nicely done!

-
@Farmer X said:
My abilities to fix that stompbox would be questionable (I'm much better with things mechanical). Nicely done!
Frankly speaking that’s exactly the way I always feel about those things up until I somehow get it done [emoji1]I’m no professional by any means - just love fixing whatever I can [emoji1316]
-
Been toting my Tinker Small all week. Yesterday I had an impromptu e-clip to remove, and today I had to change bulbs on my truck and daughter's Jeep.


-
@alexanderre said:
This time around I brought my Telecaster and my new-to-me yet needing quite a few fixes Fender Champ 600 to the western part of Ukraine while it’s kinda hot in Kyiv.I also brought a few stompboxes - one of them is my kinda mojo - EHX Holystain - a Big Muff fuzz + some cool effects.
I bought it about 15 years ago and didn’t play much lately - I quit serious music about 5 years ago and didn’t touch it since then.
To my surprise it was in a pretty awful shape - noisy pots and switches disrupted the last bits of inspiration I still manage to acquire [emoji23].So today I finally had time to go get all the necessary stuff and time to disassemble and clean it up.
Used Spirit all the way - first the cap lifter to pry away the knobs they were too stiff to be removed with the bare hands- trust me, I really tried [emoji38]

Then I used pliers to remove the top nuts - didn’t cover the plier head with any insulation to avoid scratches since those nuts have washers.

As I approached the foot switches I did cover the pliers with insulating tape and indeed managed to avoid scratches (for the most part [emoji23]).

And then finally I flipped the case over to unscrew the bottom cover with a phillips screwdriver.

Then it was time to remove the main board - to do so I had to unscrew the input/output jacks with the pliers first.

And there it was - accessible and ready to get its first spa in 15 years [emoji23]

I removed the metal cover of each of the two foot switches with Spirit’s flathead screws and sprayed a WD40 Contact Cleaner inside of it.


Then I did the same cleaning procedure for each of the pots - gosh they were hard to turn at first but gave in a few moments after I sprayed their internals.

As a result I got a perfectly working pedal that sounds awesome and is ready to rock now whenever I am [emoji1591]
Now I need to get back home where I have a decent Hakko soldering station and replace a malfunctioning volume pot on my Champ 600, but that’s another story [emoji1316].
This is great and reminds me to service my pedals soon…
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
