Showcase: Mods to plier-based multitools
-
Thanks Poncho

-
@roamingcat said:
Thanks Poncho
thx all :)
I'll try to find a tube that can fit inside blades holes and outside back pivot to use all the tools; might not be that simple -
@roamingcat said:
Tool Name: Leatherman Hiker
Basis: Leatherman Charge TTi
Aim: Lightweight hiking companion with all the essential implements that I need, and nothing that I don't need.
Mods: Removed the plier head and everything else except:-- S30V straight edge blade
- Saw
- Scissors
- Bit exchanger (with flat head/phillips bit attached)
- Pocket clip.
Total weight 97grams.
I’ve always wondered, how does a bit driver come in handy while hiking?
-
Probably depends on what type of gear you carry and if you have to fix anything or not

-
Tool Name: The Payback
Tool Basis: Leatherman Surge
Aim: To pay a friend back for a concert ticket he bought meMods:
Cut Gerber bit driver so that it would lock up
Cut frame to make room for Gerber bit driver
Added metal to the Gerber prybar so that it locks up
Cut a groove in one of the thin bolsters(?) to allow the tweezers to slide into the frame
Used stainless steel blackener to darken the MT (to make it look newer to him]
Copper accentsLink: /topic/89310




-
Tool Name: Style SC
Tool Basis: Style CS
Aim: disposable, easy access blade that I don't have to worry about sharpening
Mods: Replaced original drop-point blade with a custom designed 3D printed #3 scalpel holderinspired by Metro Grade Goods and ZapWizard



-
I can't get no respect.
/post/2226567
-
Tool Name: Blackfox Endurance Wrench
Basis: Blackfox Endurance (Tool is availiable under different brands)
**Aim: **Add a wrench and more functions
Mods:
Removed tools from inside which are not needed, put the other tools on one side.
Fit an adjustable wrench on the other side.
Added pocket clip.
Added neodym magnets to the wrench (glue), in case I need a magnet or want to magnetize something.
Added hook from cheap broken LSA+-Tool on top of the knife.
Added tweezers inside the frame (just some bent stainless sheet metal, but it does the job). Tweezers can be fished out with my EDC screwdriver.
Added magnet to the frame at the scissors to hold a needle. Can be fished out with the tweezers.**Links: **/topic/89868
-
Nice work!

-
Hi everyone,
I'm new to the modding world but I wanted to show you my creations
The first one my ST 300 MeOD, it's a basic tool swap between the 3OOM and the 300EOD. My phylosophy is to make a plierless mod to pair with my plier base mt because I prefer a dedicated knife to a knife on a mt. I found a regular knife blade on a mt to bulky to handle.The second is an long running project I've been working on, it's a wave that I've modify to accomodate a bit driver from a Gerber armbar slim as a outside accessible tool paired with a pair of very good scissors from a cheap Chinese mt, the brand's name is Honzin but it can be found under a gazillion name on Amazon. (if you are interested I can give you the reference). Again I've paired it with a plierless mod made out of a wave handle. I've called it the LM "nouvelle vague" it's French for "new wave".
I hope you'll like them, if you want more details I'll be glad to provide info on the tools origins and in details mods I've done.



-
Very neat mods, and I like the full-sized bit driver!
I have a sincere question...no sarcasm, criticism, or negativity intended (I also recognize that this may ignite a heated discussion):
Why make a half-tool/plier-less LM instead of going with a SAK? The packaging is already optimized for that application, and I bet weight-per-function and cost-per-function are better with that route...
Of course, I'd consider it myself simply because I have a few rebar handles that are just taking up space, but I'd still need to buy a bunch of stuff to populate it with, and that would cost more than an equivalent SAK, plus time.
Sent from my Pixel 4a using Tapatalk
-
The cost per function definitely favors a SAK. But I would argue that a half handle LM is more robust and can handle more demanding work.
-
@ilikepinkcrayons said:
Very neat mods, and I like the full-sized bit driver!I have a sincere question...no sarcasm, criticism, or negativity intended (I also recognize that this may ignite a heated discussion):
Why make a half-tool/plier-less LM instead of going with a SAK? The packaging is already optimized for that application, and I bet weight-per-function and cost-per-function are better with that route...
Of course, I'd consider it myself simply because I have a few rebar handles that are just taking up space, but I'd still need to buy a bunch of stuff to populate it with, and that would cost more than an equivalent SAK, plus time.
Sent from my Pixel 4a using Tapatalk
First of all thanks, I'm very proud of my work. It's the first time of my life that I try to do something with my 10 digits.
Regarding the plierless mod there are several reasons
[list type=decimal]-
Spare parts, since I had to gather 3 LM (Rebar for the head and awl, Wave for the body + tools and Wingman), Gerber Armbar slim and one Chinese mt for the scissors + LM parts from my MeOD mod
-
Time, my father past away last year so I had to spend some time with my mom, so I spend some time in my father's garage to tidy it up and reconnect?

-
Customisation, it is way easier to work on a LM than a SAK, my father didn't have anything to really do a custom SAK (but I'm thinking about it, with a mini champ (I love Fit To Survive YT channel)
-
The one hand opening factor
-
Fun, it was a fun project to adapt, grind, fit etc
If you want to see my mods in details I can create a topic with more pics to show you all the grinding work (spoiler alert there is a lot)
See ya and thank you again
-
-
I'm sorry for your loss, but that sounds like a very good way to connect.
You should definitely be proud, and please make a new topic; I love build threads!
Sent from my Pixel 4a using Tapatalk
-
Tool Name: WingKick?
Basis: Leatherman Sidekick
Aim: Add functionality to the Sidekick/wingman base
Mods:- switched places from the saw and scissors: Sidekick <> Wingman
- modified a chisel/pry bar with nail pry end to the large flathead
- added chamfers to the phillips driver so the LM bit holder fits snugly (vastly increases functionality, especially with my custom designed wallet caddy)
- sharpened and reprofiled the bottle/can opener for marking, awl/reamer function, and possible box opening and scraping
- reprofiled and thinned the small flathead at the end of the file/ruler for small screws and watch strap changing
Links:
With rather small effort I feel I've really personalized this tool for my uses (the ruler is just right for me because I do a lot of work with tires and quickly checking tread depth with it works well). If I wanted to go really all out I'd probably try to modify the frame to make the tools outside opening. I like how though the tools don't lock, I've never had these drivers fold in on me either!




-
Well done, simple but practical I like that.
Just a question, did you 3D printed the bit holding yellow thingy or did you order it ? If yes, where? Looks very useful ans well thought out. -
Thanks, it was surprisingly practical dismantling a kitchen cupboard the other day! The wallet and the bit caddy / wallet toolbox are my own designs; prototypes. I 3D printed this and have been testing and iterating different versions including one with Victorinox scissors that fit just like in the Swisscards. I'll post a link if you like when I'm satisfied with all of the tolerances.
Also since I'm posting again, here's a Style PS with some small mods: another 3D printed design to use both LM bits and 4mm ones.


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login






