Showcase: Mods to plier-based multitools
-
Tool Name: Style SC
Tool Basis: Style CS
Aim: disposable, easy access blade that I don't have to worry about sharpening
Mods: Replaced original drop-point blade with a custom designed 3D printed #3 scalpel holderinspired by Metro Grade Goods and ZapWizard



-
I can't get no respect.
/post/2226567
-
Tool Name: Blackfox Endurance Wrench
Basis: Blackfox Endurance (Tool is availiable under different brands)
**Aim: **Add a wrench and more functions
Mods:
Removed tools from inside which are not needed, put the other tools on one side.
Fit an adjustable wrench on the other side.
Added pocket clip.
Added neodym magnets to the wrench (glue), in case I need a magnet or want to magnetize something.
Added hook from cheap broken LSA+-Tool on top of the knife.
Added tweezers inside the frame (just some bent stainless sheet metal, but it does the job). Tweezers can be fished out with my EDC screwdriver.
Added magnet to the frame at the scissors to hold a needle. Can be fished out with the tweezers.**Links: **/topic/89868
-
Nice work!

-
Hi everyone,
I'm new to the modding world but I wanted to show you my creations
The first one my ST 300 MeOD, it's a basic tool swap between the 3OOM and the 300EOD. My phylosophy is to make a plierless mod to pair with my plier base mt because I prefer a dedicated knife to a knife on a mt. I found a regular knife blade on a mt to bulky to handle.The second is an long running project I've been working on, it's a wave that I've modify to accomodate a bit driver from a Gerber armbar slim as a outside accessible tool paired with a pair of very good scissors from a cheap Chinese mt, the brand's name is Honzin but it can be found under a gazillion name on Amazon. (if you are interested I can give you the reference). Again I've paired it with a plierless mod made out of a wave handle. I've called it the LM "nouvelle vague" it's French for "new wave".
I hope you'll like them, if you want more details I'll be glad to provide info on the tools origins and in details mods I've done.



-
Very neat mods, and I like the full-sized bit driver!
I have a sincere question...no sarcasm, criticism, or negativity intended (I also recognize that this may ignite a heated discussion):
Why make a half-tool/plier-less LM instead of going with a SAK? The packaging is already optimized for that application, and I bet weight-per-function and cost-per-function are better with that route...
Of course, I'd consider it myself simply because I have a few rebar handles that are just taking up space, but I'd still need to buy a bunch of stuff to populate it with, and that would cost more than an equivalent SAK, plus time.
Sent from my Pixel 4a using Tapatalk
-
The cost per function definitely favors a SAK. But I would argue that a half handle LM is more robust and can handle more demanding work.
-
@ilikepinkcrayons said:
Very neat mods, and I like the full-sized bit driver!I have a sincere question...no sarcasm, criticism, or negativity intended (I also recognize that this may ignite a heated discussion):
Why make a half-tool/plier-less LM instead of going with a SAK? The packaging is already optimized for that application, and I bet weight-per-function and cost-per-function are better with that route...
Of course, I'd consider it myself simply because I have a few rebar handles that are just taking up space, but I'd still need to buy a bunch of stuff to populate it with, and that would cost more than an equivalent SAK, plus time.
Sent from my Pixel 4a using Tapatalk
First of all thanks, I'm very proud of my work. It's the first time of my life that I try to do something with my 10 digits.
Regarding the plierless mod there are several reasons
[list type=decimal]-
Spare parts, since I had to gather 3 LM (Rebar for the head and awl, Wave for the body + tools and Wingman), Gerber Armbar slim and one Chinese mt for the scissors + LM parts from my MeOD mod
-
Time, my father past away last year so I had to spend some time with my mom, so I spend some time in my father's garage to tidy it up and reconnect?

-
Customisation, it is way easier to work on a LM than a SAK, my father didn't have anything to really do a custom SAK (but I'm thinking about it, with a mini champ (I love Fit To Survive YT channel)
-
The one hand opening factor
-
Fun, it was a fun project to adapt, grind, fit etc
If you want to see my mods in details I can create a topic with more pics to show you all the grinding work (spoiler alert there is a lot)
See ya and thank you again
-
-
I'm sorry for your loss, but that sounds like a very good way to connect.
You should definitely be proud, and please make a new topic; I love build threads!
Sent from my Pixel 4a using Tapatalk
-
Tool Name: WingKick?
Basis: Leatherman Sidekick
Aim: Add functionality to the Sidekick/wingman base
Mods:- switched places from the saw and scissors: Sidekick <> Wingman
- modified a chisel/pry bar with nail pry end to the large flathead
- added chamfers to the phillips driver so the LM bit holder fits snugly (vastly increases functionality, especially with my custom designed wallet caddy)
- sharpened and reprofiled the bottle/can opener for marking, awl/reamer function, and possible box opening and scraping
- reprofiled and thinned the small flathead at the end of the file/ruler for small screws and watch strap changing
Links:
With rather small effort I feel I've really personalized this tool for my uses (the ruler is just right for me because I do a lot of work with tires and quickly checking tread depth with it works well). If I wanted to go really all out I'd probably try to modify the frame to make the tools outside opening. I like how though the tools don't lock, I've never had these drivers fold in on me either!




-
Well done, simple but practical I like that.
Just a question, did you 3D printed the bit holding yellow thingy or did you order it ? If yes, where? Looks very useful ans well thought out. -
Thanks, it was surprisingly practical dismantling a kitchen cupboard the other day! The wallet and the bit caddy / wallet toolbox are my own designs; prototypes. I 3D printed this and have been testing and iterating different versions including one with Victorinox scissors that fit just like in the Swisscards. I'll post a link if you like when I'm satisfied with all of the tolerances.
Also since I'm posting again, here's a Style PS with some small mods: another 3D printed design to use both LM bits and 4mm ones.


-
Tool Name: Style PDF (pliers + diamond file)
Basis: Style PS
Aim: Create a specific toolset to complement a specific edc arrangement. This differs from my previous Style mod by removing material more than adding. Also this blade is a placeholder as I plan on replacing it with a scalpel holder blade (which I can then remove and sharpen easily).
Mods:- Removed the entire carabiner area to minimize size and weight
- Changed the scissors for a knife and driver
- Modified plier shape for even better reach AND to accommodate the driver bit holder for much more utility
- Changed the entire scale and original driver side for a fixed diamond file (modified from a Surge file) for field sharpening.
Links:




-
Tool Name: Gerber MP600 Drive
Basis: Gerber MP600ST (Sight Tool)
Aim: Create a MP600 with a bit driver, scissors, and the tool layout of my choice. Much prefer the MP600ST as the main tool due to the frame already having cutouts, longer combo knife blade, longer Phillips driver, replaceable cutter inserts, and better plastic tool locks on this model.Mods:
- Removed AR sight tool and add gerber armbar slim bit driver. Driver tool and MP600 crane both had to be modded a good bit to allow fitment. Still need to finish fine tuning, pics are from test fitment. NOTE: attempted to modify the AR sight tool initially to accept a bit extension but this is not recommended as it is easier to add the bit driver from the armbar, and also allows for another short tool to be added.
- Added scissors, Tshank adapter (for surge file, Tshank saw blades, etc), and large flathead with V notch.
- HSS cutter inserts are on the way to replace the absolute garbage carbide inserts.
- EPI insta-black 370SS sample kit on the way to blacken the modified portion of the frame, bit driver, and satin tools.
Also may add Wire Stripper tool from SOG powerlock in near future. I’ve already done this mod to my other MP600.
Sent from my iPhone using Tapatalk




-
Nice! -
Tool Name: Mr. Pinchy plus
Basis: Gerber Multi plier
Aim: This was bought used and it was a quirky specimen with the same toolset in each handle. This gave me a sense of freedom to mod and I decided to create an experimental toolset with inspiration taken from tools created long after Mr. Pinchy's release and really extend the use of the tool. At this point these are just prototypes made from PLA but I will be having the final verisons made from metals such as steel, aluminum or titanium. I am still considering what I will do with that last duplicate tool (perhaps an awl and another flathead, box opener, or magnifying glass.
Mods:- I designed and 3D printed a prototype 1-hand opening scalpel holder blade which also functions as a package opener if the blade is broken or removed.
- Designed and 3D printed a pair of tools: a t-shank holder which includes a LM mini bit holder and a wide chisel/scraper/pry which also doubles as the second 'wall' for the t-shank holder.
Links:



-
That's an awesome use of 3D printed parts

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login






