The October 2022 EDC Fixed Blade Challenge
-
Day 7 -
Another change up today and selected a Mora 511. Carry Semi concealed, as I slid the belt clip over and inside the watch pocket of front right pocket with sheath in the pocket. Handle is easy to access for extraction.
[attach id=0 msg=2372610]Still upset about my chickens


-
Late posting.....

-
Day 7

Thanks to Alan's post earlier, I brought out the Brisa Necker(green handle, scandi grind) and Bobtail(mustard handle, FFG) to compare. I got the Necker after getting a few full size knives from Brisa, and naturally, I gravitate towards their Scandi grind. But in reality, this is a smaller knife and with a 3.5 finger handle, and I do feel a full flat grind (FFG) probably be more suitable for daily light use. So I end up getting the Bobtail when it comes out, and turns out it is what I really wanted, a 4 finger small blade suitable for light use.
-
I knew the handle on the bobtail was longer but the picture makes it look as though the blade is also a little longer, unless that is just from the camera angle. I haven't seen them side by side before. Thanks.

-
Day 6
Yesterday was a busy day and I forgot to. Post a picture of the ATK. It cut open a bag of tenders for dinner.
Day 7
The ATK opened a bag of dental chews for Fisher (which for some reason won’t upload, so I’ll post another picture later) -
Day 7
The Ozark is riding in my front pocket today, clipped to the webbing on my Viperade pocket organizer.
-
@Sos24 said:
Day 6
Yesterday was a busy day and I forgot to. Post a picture of the ATK. It cut open a bag of tenders for dinner.
Day 7
The ATK opened a bag of dental chews for Fisher (which for some reason won’t upload, so I’ll post another picture later)Have you tried making the picture smaller. Sometimes that helps. By the way you didn't post a day 5 picture either.
-
Day 07
Well, that is the first week done and in the books. Everyone has done very well so far with some exceptional blades shown and used.
Today I'm following after Noa Isumi and using the Ozark Trail fixie from Wal-Mart. I never saw the red handle that Noa has on his knife or I'd have bought one but I went with the black, orange and woodgrain handle. They also had all black but I've reached a point in my life where I avoid anything that looks tactical. I didn't get mine on clearance for $3.00. I think I paid the full price of $4.97.
I've been pretty gentle with it so I don't know how much abuse it could really take. Mine usually lives on my dining room table, just opening food packets and pill bottles. For that it does a great job.
I have to wonder though, why did I just spend $115 on the Bradford Guardian when I could have spent less and had 20 of these Ozark Trails fixies. Instead of carrying one with me I could have simply left one in every place in the house where I might need a knife. Oh well. You live and you learn.
Seriously though, these things are way, way better than their price would lead you to believe and I actually recommend them. 

-
Day 8
GEC on curry duty, a fine job it did too
Went a bit overboard with the pics 8)







-
@LoopCutter said:
I’m
I have been looking too! Found a few on auction site that are US made, so far I can only say I am still researching!


I’d have preferred a US made one but they’re impossible to get in Australia without importing one which would cost four or five times as much. The China made ones are about the cost of a pub lunch here so bit of a bargain

-
Day 7: a lot of use.
I opened up a 1991 Bucklite 422 Ranger. I may end up trading this one. Not as impressed with the handle feel as the first-gen. But, I'm probably keeping it as a backup to the first-gen, as the 422 was the only one with finger grooves--I don't know why it didn't carry over to later Bucklites. I now have most of the Bucklites that retained the standard 112 handle shape.
Looks like I'll be back to my 112LT for some time--both 422s have some pretty bad edges that need to be addressed by Buck.

I used the Dexter Russell net knife to cut some tape and insulation freeze-proofing some cleanouts in our waterline. I got this a few years ago as a cheap alternative to knives like the Spyderco Jumpmaster and Enuff, and I have to say, I'm impressed with everything but the sheath. The knife is US-made, holds a really good edge, has decent rust resistance, and their serrations are wicked. The handle also is incredibly slip-resistant. The sheath is weak, and I snapped the belt loop off, so I cut what was left of it off and made it a pocket fixed blade. I'll soon go to something nylon.
It's a brush cutter, insulation knife, rope knife, pruning knife, box cutter, well just about everything.

As you can tell, I use this knife hard. I'm not afraid to loan it to my grandmother, as it's inexpensive to replace, but still takes most rough jobs. I've been thinking about moving to Sanisafe by Dexter to replace my hodge-podge group of old kitchen knives for regular cooking use, as well as picking out a butcher for use as my hunting knife, mainly because I love the steel and handles.
-
I’d have preferred a US made one but they’re impossible to get in Australia without importing one which would cost four or five times as much. The China made ones are about the cost of a pub lunch here so bit of a bargain

That’s what my research has revealed. USA stamped units 2 to 3 times more used, than a new 152 model.
Eyeing a camo handle one with black blade. Or go to local farm store and spend about a healthy pub lunch for one 😜
On auction site, if cheap, it is without sheath and shipping can painful, if a few dollars more a nylon sheath, if a few more then leather sheath. Then there are fakes as well.Those describe handle wood, no info on steel or mention of Schrade.
I have spent yo much time. Will see!
-
I feel that if you're not getting a Schrade USA Sharpfinger then you can get any similar knife from any maker because they're all probably made in the same factory in China anyway. The one Cody picked up seems nice. I've had a good long look on the auction site and, yes, the older USA Sharpfingers are getting pricey. They do have a new heritage series that is made in the US but they want about $65 for one of the new heritage series Sharpfingers. For my money, I would rather get a new regular Sharpfinger for about a 3rd the price, but I'd recommend spending whatever extra for one with the leather sheath. Make sure to get the leather sheath that has the snap at the bottom and not the one that has the snap towards the end of the handle. In any case, you're all going to be amazed at how good this knife design is. Happy searching.

-
LC and Alan 
I went for the one on the left, preferred the look of the moulded leather sheath and from a reputable seller I’ve bought from before.
It would’ve been a bit cheaper to get a synthetic sheath but the leather looked a much better betGot a bit of a discount on the advertised price too thanks to eBay plus, so seems good value….looking forward to trying it out

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


on both counts. This is a great challenge even for the spectators!