The October 2022 EDC Fixed Blade Challenge
-
@Sos24 said:
Day 6
Yesterday was a busy day and I forgot to. Post a picture of the ATK. It cut open a bag of tenders for dinner.
Day 7
The ATK opened a bag of dental chews for Fisher (which for some reason won’t upload, so I’ll post another picture later)Have you tried making the picture smaller. Sometimes that helps. By the way you didn't post a day 5 picture either.
-
Day 07
Well, that is the first week done and in the books. Everyone has done very well so far with some exceptional blades shown and used.
Today I'm following after Noa Isumi and using the Ozark Trail fixie from Wal-Mart. I never saw the red handle that Noa has on his knife or I'd have bought one but I went with the black, orange and woodgrain handle. They also had all black but I've reached a point in my life where I avoid anything that looks tactical. I didn't get mine on clearance for $3.00. I think I paid the full price of $4.97.
I've been pretty gentle with it so I don't know how much abuse it could really take. Mine usually lives on my dining room table, just opening food packets and pill bottles. For that it does a great job.
I have to wonder though, why did I just spend $115 on the Bradford Guardian when I could have spent less and had 20 of these Ozark Trails fixies. Instead of carrying one with me I could have simply left one in every place in the house where I might need a knife. Oh well. You live and you learn.
Seriously though, these things are way, way better than their price would lead you to believe and I actually recommend them. 

-
Day 8
GEC on curry duty, a fine job it did too
Went a bit overboard with the pics 8)







-
@LoopCutter said:
I’m
I have been looking too! Found a few on auction site that are US made, so far I can only say I am still researching!


I’d have preferred a US made one but they’re impossible to get in Australia without importing one which would cost four or five times as much. The China made ones are about the cost of a pub lunch here so bit of a bargain

-
Day 7: a lot of use.
I opened up a 1991 Bucklite 422 Ranger. I may end up trading this one. Not as impressed with the handle feel as the first-gen. But, I'm probably keeping it as a backup to the first-gen, as the 422 was the only one with finger grooves--I don't know why it didn't carry over to later Bucklites. I now have most of the Bucklites that retained the standard 112 handle shape.
Looks like I'll be back to my 112LT for some time--both 422s have some pretty bad edges that need to be addressed by Buck.

I used the Dexter Russell net knife to cut some tape and insulation freeze-proofing some cleanouts in our waterline. I got this a few years ago as a cheap alternative to knives like the Spyderco Jumpmaster and Enuff, and I have to say, I'm impressed with everything but the sheath. The knife is US-made, holds a really good edge, has decent rust resistance, and their serrations are wicked. The handle also is incredibly slip-resistant. The sheath is weak, and I snapped the belt loop off, so I cut what was left of it off and made it a pocket fixed blade. I'll soon go to something nylon.
It's a brush cutter, insulation knife, rope knife, pruning knife, box cutter, well just about everything.

As you can tell, I use this knife hard. I'm not afraid to loan it to my grandmother, as it's inexpensive to replace, but still takes most rough jobs. I've been thinking about moving to Sanisafe by Dexter to replace my hodge-podge group of old kitchen knives for regular cooking use, as well as picking out a butcher for use as my hunting knife, mainly because I love the steel and handles.
-
I’d have preferred a US made one but they’re impossible to get in Australia without importing one which would cost four or five times as much. The China made ones are about the cost of a pub lunch here so bit of a bargain

That’s what my research has revealed. USA stamped units 2 to 3 times more used, than a new 152 model.
Eyeing a camo handle one with black blade. Or go to local farm store and spend about a healthy pub lunch for one 😜
On auction site, if cheap, it is without sheath and shipping can painful, if a few dollars more a nylon sheath, if a few more then leather sheath. Then there are fakes as well.Those describe handle wood, no info on steel or mention of Schrade.
I have spent yo much time. Will see!
-
I feel that if you're not getting a Schrade USA Sharpfinger then you can get any similar knife from any maker because they're all probably made in the same factory in China anyway. The one Cody picked up seems nice. I've had a good long look on the auction site and, yes, the older USA Sharpfingers are getting pricey. They do have a new heritage series that is made in the US but they want about $65 for one of the new heritage series Sharpfingers. For my money, I would rather get a new regular Sharpfinger for about a 3rd the price, but I'd recommend spending whatever extra for one with the leather sheath. Make sure to get the leather sheath that has the snap at the bottom and not the one that has the snap towards the end of the handle. In any case, you're all going to be amazed at how good this knife design is. Happy searching.

-
LC and Alan 
I went for the one on the left, preferred the look of the moulded leather sheath and from a reputable seller I’ve bought from before.
It would’ve been a bit cheaper to get a synthetic sheath but the leather looked a much better betGot a bit of a discount on the advertised price too thanks to eBay plus, so seems good value….looking forward to trying it out

-
Day 07



Today is this number, I think this came off of a seller on Instagram? No idea to be honest. I did have to hand grind a new bezel into it for a past challenge, as the edge was way too fat to be productive, and I gave the kydex sheath a faux leather covering with sofa fabric, held in place by that small piece of ball chain. I really like this knife, I just wish it was a smidge, like a cm or two longer in the handle.
-
Day 7
glam pic<a href="https://flic.kr/p/2nRvxwU" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/52412457300_f77608aee1.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20221007_183047 by Humayd a r Mahomedy, on Flickr
-
@Alan K. said:
I knew the handle on the bobtail was longer but the picture makes it look as though the blade is also a little longer, unless that is just from the camera angle. I haven't seen them side by side before. Thanks.

Pretty sure the last pix should present them correctly, but here is another picture taken for size comparison. I'd make sure the pix is taken further away(to eliminate close range lens distortion) and keep the phone camera level. The Bobtail does have a larger blade, and larger handle. -
Day 8



Since I was doing a comparison photo for the Brisa Bobtail and Necker, I figured I would do another one for these two--the Mora Garberg and Condor Terrasaur.
Before the Garberg, I think many Mora fans had always wanted a 'full tang' knife from Mora and IIRC, it made quite a buzz when it was first released. It was quite functional as a full tang knife, but not what I have expected from most of my Mora knives experience, lightweight and well balanced.
Then came the Condor Terrasaur, which is heavily inspired by the Garberg. To some extent, I think it is an interesting offering. The fit and finish is no where near Mora level, but it was nearly half the price. The weight is a lot less while maintaining full tang, the blade stock is slightly thinner(2.83mm vs 3.2mm on Garberg) and balance is better in hand. To some extent, it is the format I wish Mora Garberg would have presented in.
But would I recommend this over the Garberg? The answer probably will depend on personal preference--if you have a large size hand, and don't mind a little extra weight or balance biased towards handle, then Garberg is probably a good choice if you don't mind the higher price tag. If weight and balance is first of higher priorities, or don't mind trading off fit and finish for a lesser price tag, then Condor Terrasaur indeed will be a better choice.
-
Day 8:
Cutting open some sausages for the grill:

Sent from my iPhone using Tapatalk
-



Since I was doing a comparison photo for the Brisa Bobtail and Necker, I figured I would do another one for these two--the Mora Garberg and Condor Terrasaur.
Before the Garberg, I think many Mora fans had always wanted a 'full tang' knife from Mora and IIRC, it made quite a buzz when it was first released. It was quite functional as a full tang knife, but not what I have expected from most of my Mora knives experience, lightweight and well balanced.
Then came the Condor Terrasaur, which is heavily inspired by the Garberg. To some extent, I think it is an interesting offering. The fit and finish is no where near Mora level, but it was nearly half the price. The weight is a lot less while maintaining full tang, the blade stock is slightly thinner(2.83mm vs 3.2mm on Garberg) and balance is better in hand. To some extent, it is the format I wish Mora Garberg would have presented in.
But would I recommend this over the Garberg? The answer probably will depend on personal preference--if you have a large size hand, and don't mind a little extra weight or balance biased towards handle, then Garberg is probably a good choice if you don't mind the higher price tag. If weight and balance is first of higher priorities, or don't mind trading off fit and finish for a lesser price tag, then Condor Terrasaur indeed will be a better choice.
That is a nice comparison. I’ve read a few reviews of the Garberg,because I was considering it at one point. It seems many reviewers felt unless you were really planning on hard use that required full tang, the Kansbol would meet most requirements while still being light.
-
@Alan K. said:
Have you tried making the picture smaller. Sometimes that helps. By the way you didn't post a day 5 picture either.I did try making the picture smaller but it just came up with an error.
As far as Day 5, I must of enjoyed my breakfast so much I forgot to post.
Day 5
The ATK opened the cheese, bacon, and tortillas; while the wife did the cooking

Day 7
Because the one picture didn’t load, I took a glamour shot while out walking

Day 8
ATK opened up a box of some medicine for Fisher.

-
At 23:40 last night AlanK offered his insights, at 23:59 EchoTech says he pulled the trigger. Very shortly after that reviewed my two choice on the big River site and shortly after midnight I too pulled the trigger and a reply received indicated item would delivered by 22:30, 10/08/22!!! 
Well they were right, at 12:08, e-mail received, packaged delivered. Same Day🤪
[attach id=0 msg=2372793]
Buck El Morro welcomed new sharpie to the nest!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


on both counts. This is a great challenge even for the spectators!