The October 2022 EDC Fixed Blade Challenge
-
@Alan K. said:
Day 26
Today I need to be discreet so it's going to be a neck knife. This is basically a shiv that you used to be able to buy for $1.99 from BudK who sold it as a survival neck knife. At some point I rounded off an order and got free shipping by adding this for less than shipping would have cost me. I figured it would be a throw away, but I kept it. Chisel ground, it came barely sharp enough to spread jam on toast, but I was able to file a cutting edge on it. The fact that it could be sharpened with a file leaves some doubt about any sort of heat treatment, but it fits tight in the scabbard and is relatively comfortable in the hand, and as an added bonus the scabbard also has a whistle (don't judge me).
I was focusing on the knife more than the background(agree with Sos on the knife), but just pick up the title after browsing the post for the second time. So what could one learn from this?

-
@LoopCutter said:
In my teens, I was gifted a very similar styled knife, the wood was much lighter almost white, my parents thought it to be a novelty knife, but I knew it was very sharp🙄I am not sure if it is at my home where I grew up, or if it survived my dad’s house cleaning back when? He burned all my baseball cards and comic books after I did not return home from college and brothers said they did not want😢
Is it noted on the knife if it is a limited edition?
I like the color of that one and is guessing it is a 511 work knife.
I have a 1 (4”) in route after securing on the auction site. Wood handle! This not a 1/0, that size is a shorter blade. I just like the Mora styles, as well as the price. I used for work cutting cable coverings in the winter, sheathes fitted inside bibs leg pocket and no need to remove gloves in sub freezing temps to access. Bright colors, too. And always sharp.

By the label, I think they call this 546 but essentially probably just the same shape as the 511, but with different steel(this is stainless). I love all things Mora(or at least most majority of it), such good value. -
@LoopCutter said:
I use my Buck lite max small for most heavy cutting of joints and tendons.That Buck Lite Max is real workin' knife!

-
This summer I learned that it fits perfectly in a 113 Ranger Sheath, it increased its usefulness, now each one has a leather sheath including the previous version.
I want a CUSTOM 113 bad, but can not justify the price when I compare the two as both have 420HC steel (stock 113) and they took away the S35VN option.
-
@LoopCutter said:
This summer I learned that it fits perfectly in a 113 Ranger Sheath, it increased its usefulness, now each one has a leather sheath including the previous version.I want a CUSTOM 113 bad, but can not justify the price when I compare the two as both have 420HC steel (stock 113) and they took away the S35VN option.
There is an S30V option for the 113..... S35VN and S30V are really similar in many ways. S30V might have the edge in edge retention, S35VN has a tad more toughness. (I think that's so....) To be honest, I can't really tell the difference in real world use.
And keep in mind, S30V was specifically developed as a knife steel! So many of our steels were developed for other purposes, e.g. 5160 for truck springs, D2 as a tool steel, 154CM for aerospace purpose, etc.....
So, you'll never catch me turning up my nose at an S30V blade! :D -
I spoke with a fellow from Buck a few days ago, he hinted that 2023 might see some 117 options coming out. The 117 is, in my mind, a 102 with a larger handle--an instant favorite with me. I will definitely be saving some pennies for an eye catching 117.

-
@Humayd A R Mahomedy said:
Day 27
i carried the Boker Cop Tool today,i've carried it a few times in the years since i got it,but didn't really use it.<a href="https://flic.kr/p/2nVGo48" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/52459837629_58b31261e5.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20221027_164357 by Humayd a r Mahomedy, on Flickr
<a href="https://flic.kr/p/2nVHHFS" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/52460098788_8ef012871b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20221027_164415 by Humayd a r Mahomedy, on Flickri bought a new item of clothing and had a couple tags to remove.
the "belt/line cutter worked well on the string [which didn't need to be cut,but we cut stuff :D] and plastic tag thingy
<a href="https://flic.kr/p/2nVCkrR" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/52459048407_2092296d38.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20221027_183510 by Humayd a r Mahomedy, on Flickr
<a href="https://flic.kr/p/2nVGoCz" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/52459839569_02e3096814.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20221027_183534 by Humayd a r Mahomedy, on Flickr<a href="https://flic.kr/p/2nVCmc3" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/52459050912_5621d0cfa3.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20221027_183548 by Humayd a r Mahomedy, on Flickr
<a href="https://flic.kr/p/2nVHiZA" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/52460019080_63be29d9e7.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20221027_183603 by Humayd a r Mahomedy, on FlickrNeat tool, almost like a mini-Becker BK3.

-
I agree, from my experience I have found S35VN holds an edge very well AND has been much easier to restore that edge to hair splitting sharp.
S30V holds a edge equally well, and like you said and I agree a bit better.
But once that fine edge is lost it is much more difficult to restore it to it finest.
I will admit, I do not have the best skills at sharpening, I rely on my tools, but I have had finger slicing experience with S35VN and Buck’s 420HC, not so with S30v. Then I may not have the patience 😜A 117? That will be interesting.
I recall back in the day, when venturing out for a hiking trip, camp out or a camp hunt, you would anguish over ammunition, gun and if rain gear is needed.
Today, we may spend 2 hours or more deciding which edge will serve me proper, and then say heck I take two or three in the pack and one on my belt.
Funny, a few days ago, met a buddy for a hike to see if the eagles had moved to southern edge of the Marsh. My Buddy was 30 minutes late! Said he had trouble deciding which boots. He chose wrong, we are hiking a marsh, rubber would have been better. His leathers were not tall enough and his soaks added 2lbs plus inside boots. Fortunately it was mid 70s.
To many choices.
-
Day 28

Used ESEE Candiru for some paper work stuff. -
@LoopCutter said:
I agree, from my experience I have found S35VN holds an edge very well AND has been much easier to restore that edge to hair splitting sharp.
S30V holds a edge equally well, and like you said and I agree a bit better.
But once that fine edge is lost it is much more difficult to restore it to it finest.
I will admit, I do not have the best skills at sharpening, I rely on my tools, but I have had finger slicing experience with S35VN and Buck’s 420HC, not so with S30v. Then I may not have the patience 😜A 117? That will be interesting.
I recall back in the day, when venturing out for a hiking trip, camp out or a camp hunt, you would anguish over ammunition, gun and if rain gear is needed.
Today, we may spend 2 hours or more deciding which edge will serve me proper, and then say heck I take two or three in the pack and one on my belt.
Funny, a few days ago, met a buddy for a hike to see if the eagles had moved to southern edge of the Marsh. My Buddy was 30 minutes late! Said he had trouble deciding which boots. He chose wrong, we are hiking a marsh, rubber would have been better. His leathers were not tall enough and his soaks added 2lbs plus inside boots. Fortunately it was mid 70s.
To many choices.
I think I read it from Jacknife that a friend from the knife industry had once told him 90% of all the steel 'chase' are just market hype. I still remembered those days when S30V was the be-all end-all knife steel of the century, and it will cut thru anything like a light saber with no hesitation. Funny many modern knife 'enthusiasts' will now probably look at S30V like an average steel.
-
Day 28
This day I am going to touch upon a couple of items.
One - an update of progress made
[attach id=0 msg=2376410]My Lego Bonsai is now erect and even appears to have greenery. Today received my COVID booster, told to stay quiet😔. Working on attaching leaves and assembly of the pink/while foliage branches. Smaller parts = risk of short patience so no cursing, stay quiet🙄
Two. Yesterday Comis peaked my interest with Mora special editions! So explored their web site review multiple pages and gathering info and low and behold I found a answer to a question I had asked myself numerous times.
Ever noticed the the Crown / oars emblem on front of certain sheaths?
[attach id=1 msg=2376410]Well, it turns out that their working knives are intended to be mated together for tasks, so they can be kept organized😉
[attach id=2 msg=2376410]
[attach id=3 msg=2376410]Maybe everyone already knew this, but I am bored and wanted to share😁🫡 😎




-
And, I forgot Day 28 carry is an Izzie II via Neck
Cord.
[attach id=0 msg=2376412]
-
@LoopCutter said:
I agree, from my experience I have found S35VN holds an edge very well AND has been much easier to restore that edge to hair splitting sharp.
S30V holds a edge equally well, and like you said and I agree a bit better.
But once that fine edge is lost it is much more difficult to restore it to it finest.
I will admit, I do not have the best skills at sharpening, I rely on my tools, but I have had finger slicing experience with S35VN and Buck’s 420HC, not so with S30v. Then I may not have the patience [emoji12]A 117? That will be interesting.
I recall back in the day, when venturing out for a hiking trip, camp out or a camp hunt, you would anguish over ammunition, gun and if rain gear is needed.
Today, we may spend 2 hours or more deciding which edge will serve me proper, and then say heck I take two or three in the pack and one on my belt.
Funny, a few days ago, met a buddy for a hike to see if the eagles had moved to southern edge of the Marsh. My Buddy was 30 minutes late! Said he had trouble deciding which boots. He chose wrong, we are hiking a marsh, rubber would have been better. His leathers were not tall enough and his soaks added 2lbs plus inside boots. Fortunately it was mid 70s.
To many choices.
S35vn is one of my favorite steels specifically because of it being great at holding an edge while still fairly easy to sharpen.
-
@LoopCutter said:
A 117? That will be interesting.Too many choices indeed! :D
-

Some old-fashioned 1095 cutting the tape used to contained a rolled up rug.

-
Day 28: my other Tekna Xtra Edge, which is orange with the "screwdriver" tip.
This one was defective, and I ended up gluing the blade into the handle. Every time I would have to make a pull cut, the blade liked to pull itself out of the handle.

The screwdriver tip isn't as much of a safety blade as I thought. It's still got a sharp tip. I have never pried with it.

-
Day 28
Izula II with Vic Spirit.

-
A lot to
in this thread! And yes indeed, picking a new fixie is tough. -
Day 29


-
Day 28
113 helped prep some wood for making popcorn

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
