The October 2022 EDC Fixed Blade Challenge
-
I agree, from my experience I have found S35VN holds an edge very well AND has been much easier to restore that edge to hair splitting sharp.
S30V holds a edge equally well, and like you said and I agree a bit better.
But once that fine edge is lost it is much more difficult to restore it to it finest.
I will admit, I do not have the best skills at sharpening, I rely on my tools, but I have had finger slicing experience with S35VN and Buck’s 420HC, not so with S30v. Then I may not have the patience 😜A 117? That will be interesting.
I recall back in the day, when venturing out for a hiking trip, camp out or a camp hunt, you would anguish over ammunition, gun and if rain gear is needed.
Today, we may spend 2 hours or more deciding which edge will serve me proper, and then say heck I take two or three in the pack and one on my belt.
Funny, a few days ago, met a buddy for a hike to see if the eagles had moved to southern edge of the Marsh. My Buddy was 30 minutes late! Said he had trouble deciding which boots. He chose wrong, we are hiking a marsh, rubber would have been better. His leathers were not tall enough and his soaks added 2lbs plus inside boots. Fortunately it was mid 70s.
To many choices.
-
Day 28

Used ESEE Candiru for some paper work stuff. -
@LoopCutter said:
I agree, from my experience I have found S35VN holds an edge very well AND has been much easier to restore that edge to hair splitting sharp.
S30V holds a edge equally well, and like you said and I agree a bit better.
But once that fine edge is lost it is much more difficult to restore it to it finest.
I will admit, I do not have the best skills at sharpening, I rely on my tools, but I have had finger slicing experience with S35VN and Buck’s 420HC, not so with S30v. Then I may not have the patience 😜A 117? That will be interesting.
I recall back in the day, when venturing out for a hiking trip, camp out or a camp hunt, you would anguish over ammunition, gun and if rain gear is needed.
Today, we may spend 2 hours or more deciding which edge will serve me proper, and then say heck I take two or three in the pack and one on my belt.
Funny, a few days ago, met a buddy for a hike to see if the eagles had moved to southern edge of the Marsh. My Buddy was 30 minutes late! Said he had trouble deciding which boots. He chose wrong, we are hiking a marsh, rubber would have been better. His leathers were not tall enough and his soaks added 2lbs plus inside boots. Fortunately it was mid 70s.
To many choices.
I think I read it from Jacknife that a friend from the knife industry had once told him 90% of all the steel 'chase' are just market hype. I still remembered those days when S30V was the be-all end-all knife steel of the century, and it will cut thru anything like a light saber with no hesitation. Funny many modern knife 'enthusiasts' will now probably look at S30V like an average steel.
-
Day 28
This day I am going to touch upon a couple of items.
One - an update of progress made
[attach id=0 msg=2376410]My Lego Bonsai is now erect and even appears to have greenery. Today received my COVID booster, told to stay quiet😔. Working on attaching leaves and assembly of the pink/while foliage branches. Smaller parts = risk of short patience so no cursing, stay quiet🙄
Two. Yesterday Comis peaked my interest with Mora special editions! So explored their web site review multiple pages and gathering info and low and behold I found a answer to a question I had asked myself numerous times.
Ever noticed the the Crown / oars emblem on front of certain sheaths?
[attach id=1 msg=2376410]Well, it turns out that their working knives are intended to be mated together for tasks, so they can be kept organized😉
[attach id=2 msg=2376410]
[attach id=3 msg=2376410]Maybe everyone already knew this, but I am bored and wanted to share😁🫡 😎




-
And, I forgot Day 28 carry is an Izzie II via Neck
Cord.
[attach id=0 msg=2376412]
-
@LoopCutter said:
I agree, from my experience I have found S35VN holds an edge very well AND has been much easier to restore that edge to hair splitting sharp.
S30V holds a edge equally well, and like you said and I agree a bit better.
But once that fine edge is lost it is much more difficult to restore it to it finest.
I will admit, I do not have the best skills at sharpening, I rely on my tools, but I have had finger slicing experience with S35VN and Buck’s 420HC, not so with S30v. Then I may not have the patience [emoji12]A 117? That will be interesting.
I recall back in the day, when venturing out for a hiking trip, camp out or a camp hunt, you would anguish over ammunition, gun and if rain gear is needed.
Today, we may spend 2 hours or more deciding which edge will serve me proper, and then say heck I take two or three in the pack and one on my belt.
Funny, a few days ago, met a buddy for a hike to see if the eagles had moved to southern edge of the Marsh. My Buddy was 30 minutes late! Said he had trouble deciding which boots. He chose wrong, we are hiking a marsh, rubber would have been better. His leathers were not tall enough and his soaks added 2lbs plus inside boots. Fortunately it was mid 70s.
To many choices.
S35vn is one of my favorite steels specifically because of it being great at holding an edge while still fairly easy to sharpen.
-
@LoopCutter said:
A 117? That will be interesting.Too many choices indeed! :D
-

Some old-fashioned 1095 cutting the tape used to contained a rolled up rug.

-
Day 28: my other Tekna Xtra Edge, which is orange with the "screwdriver" tip.
This one was defective, and I ended up gluing the blade into the handle. Every time I would have to make a pull cut, the blade liked to pull itself out of the handle.

The screwdriver tip isn't as much of a safety blade as I thought. It's still got a sharp tip. I have never pried with it.

-
Day 28
Izula II with Vic Spirit.

-
A lot to
in this thread! And yes indeed, picking a new fixie is tough. -
Day 29


-
Day 28
113 helped prep some wood for making popcorn

-
Day27?

Just got home...2am...Got nothing....
The dogs need fed.
-
Day 28

Pocket shiv riding shotgun today, as it was chippy day and there was no mail no real uses, so I made my Obuddy into a samurai.
-
Day 29
Switching knives:


My red working knife. His orange brother has already been seen, his the one that lives in my truck. This one lives indeed the houseSent from my iPhone using Tapatalk
-
Day 29

Pizza day! Little guy invited his friends for play, and they made their own pizza to eat. And Buck Woodsman has the honor to serve the pizza
-
Day 28
saw no use. the Cop Tool is 4.9mm/.19in thick<a href="https://flic.kr/p/2nVULa9" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/52462253330_e75ea438ab.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20221029_080644 by Humayd a r Mahomedy, on Flickr
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


