~ The legendary PST challenge Nov 2022 ~
-
Nakken had already requested it and now it has been approved
Congrats Sir

-
Poncho, can you get me setup with a badge? Or let me know how to do it? Thanks everyone!
-
Day 30
Thank you all for another fun PST challenge!
I was a little quiet towards the end (due to work and vacation demands), but I was still using my PST daily. Unlike a lot of folks here, I didn't own a PST until recently - about a year or so ago. On paper, it's not a tool I would ever buy or use in 2022, but actually carrying and using the PST makes you really appreciate the design and build. I look forward to doing this again next year 
Being MTO Challenge addicted, I need a new challenge for December. :ahhh Anyone up for a Skeletool challenge?

Last day pocket dump.

-
I will give directions here and that way others will know as well if they don't already

First go to the top and click on your profile pic, then go to Profile Info it brings you to the page where can select the awards page
click on Show Available AwardsOnce you get to the Awards Page you can look at all the different badges you can apply for
the PST 30 Day Challenge is on page 5 in the Challenge section, at the right of the screen you have a couple of options, you can view who already has the badge or you can request it 
Once you click to request it will ask for some info of why you deserve it, you can give a link to your last day post and that you finished the Challenge (or if you decide to go for other badges later) you give the link to your thread or post that meets that particular badge requirements

I sure hope that helps :ahhh
-
Also, if it is a new Challenge badge that was just created for a particular challenge then we will likely just award that as it just recently became avaliable
you can still use the above directions to request it though 
-
Thanks Poncho!
-
No problem

-
That is Crunchie64 and Legend awarded now

Congrats to both of you

-
I have been under the weather the past few days and fell behind by at least 1 day. But I already have the badge, so I will continue on from here
Lumber for an addition. Given that the addition has already been framed, it appears someone badly estimated the amount of lumber needed:

Hope you're fine again Adam

Lumber away :ahhh
-
Day 30
In '97 the PST was my second Leatherman after a Super Tool in '95. I was looking for something more pocket friendly.
Both are so sleek and compact yet sturdy and reliable. I still carry and use them frequently.
To everyone who watched us from the sidelines...

-
@McStitchy said:
To everyone who watched us from the sidelines...

-
Day 30
As always, it has been a great time sharing photos, jokes, stories, etc... with you guys. And it has been a joy for me to carry a PST and related MTs. There are many more options nowadays in regards to plier-based multi tools, but none much better than the venerable PST.
I leave you all with this message:

-
Day 30 of 30 
It was an awesome 30 day challenge with PST and a bunch of great people... thanks a lot


-
@McStitchy said:
To everyone who watched us from the sidelines...

Likewise, Adam

Very cool photo, Willie

-
Great pic, Willie
and badge awarded

Great final pics, everyone 8)

-
... it was my pleasure gentlemen 
-
Day 30 of 30
Great challenge everyone.
Lots of great pics and uses for the good ol PST with a great group. Thanks, Steve for hosting! 
The Marlboro Country Store PST looks pretty good on the office book shelf. It might be on display for a bit.
[attach id=0 msg=2382893]


-
Day 30
Handoff day for the Executive challenge next month!
The best part of doing these challenges is having to carry a tool outside my normal comfort zone for a month. How annoying is it to have a multitool with no knife for a month? Do I really need scissors, or can a knife get the job done? How many tools can you cram into a multitool and still have it be pocketable. Is it worth it to cram a chisel into a pocket knife anyway? I especially like challenges that go back to the basics. The classic/original/minimalist models. It’s cool to see how much you can get done without all the extra doodads, or to try and figure out why a designed made some of the decisions they did when they didn’t have today’s technology, experience, etc. So when I started dropping the PST in my pocket late last month, I was pretty excited to see what I learned from the month. Instead, I was honestly left with more questions than answers. Mostly, how did this thing manage to launch one of the biggest multitool companies in the world? The basic tradeoff for any multitool is convenience vs capability. A Leatherman, Gerber, SAK, etc. will never have as good of a saw, screwdriver, or whatever as a single use tool. It does, however, fit in your pocket. Which means you can grab it to fix little stuff without having to walk across the workshop, over to the garage, into your car, or wherever for the toolbox. A good multitool is usually not “best” at anything (although we occasionally find a gem) but “good enough” (or ideally a bit better) at a lot of things, in a usable package. When we select a multitool, we have to decide how large of a tool we’re willing to carry, and what level of capability we want from it. Some people love keychain tools, because they’re light and handy, and always there. Other people would rather strap on a belt pouch and haul around a Surge, because they want to be able to fix as much as possible with the most usable tool possible. The “Goldilocks” mulitool for any person is the one that balances these conflicting desires as effectively as possible. The original Leatherman PST, was developed with the goal of adding an additional capacity that Tim Leatherman felt was essential, but lacking, in the traditional Swiss Army Knife: Pliers. After carrying it for a little over a month, I’m honestly baffled by how this thing ever managed to move units, let alone found a revolutionary mulitool empire. If Goldilocks is the mulitool that combines the greatest number of good enough features into a convenient package, the PST combines a lot of crap into an awkward one. Let’s start with the pliers, the keystone tool of the PST. The end of the tips are too thick to be good for a lot of needle-nose jobs (electronics, jewelry, etc.) but the base doesn’t open wide enough for something as basic as changing a shower head. Like any multitool implement, there’s an element of trying to split-the-difference here to hopefully be good enough at most stuff. Instead, they just wind up sucking at a lot of stuff. Awkward head size aside, the folding handles also limits the amount of force you can put on them when *opening* the jaws, leaving them unusable for an entire range of plier tasks. That’s not even getting into the hotspot issues of the unfinished edges. If I actually needed pliers regularly (as opposed to maybe kind of wanting them once a week or so) I think I’d just find a way to carry a small actual pair with me. Multitool pliers are tricky (I don’t know that I’ve ever used a multitool with a pair that I’d describe as *good*, but the PST pliers are both incapable and the starting point for many of the other design decisions on the tool. The 91mm Victorinox pliers aren’t great (a lot of times, they feel closer to a pair of glorified tweezers than pliers) but all they do is add a bit of bulk. They don’t make you turn your whole Swiss Army Knife inside out. But the pliers are responsible for the inconvenient deployment (and selection) of the rest of the tools. On a light-medium duty multitool like the PST, convenience is key. It don’t mind having to fiddle a bit with my Supertool, because it’s doing heavier jobs and has more implements. But when I’m doing something basic like snugging up a screw on a dresser drawer or slicing an apple, I just want to get the job done. Easy enough on a traditional pocket knife: pull it out of my pocket, find the tool, pinch and go. With the Leatherman, I have to open the whole tool, perform the clump-fan dance (probably nicking my finger in the process), and make sure the rest of the tool is out of the way if I want to close the handles. There were a lot of times this month I kind of looked at a problem, sighed, and decided I didn’t care about that random loose screw enough. I’m usually the fix-it-guy when I’m out with friends and family, and the moment as they all stared at me getting the PST out for a job I’d normally have done in seconds was awkward every time. I kept half an eye on the Minichamp challenge on the SAK board this month, and you can see the disparity in usability there. Despite the fact that MC’s are smaller than one handle of the PST (but with about the same number of tools by the official count) people actually enjoy using them! The thread is full of people *using* their Minichamps, while this one has so many glam shots of PSTs doing nothing (except hanging out with other PSTs that also aren’t doing anything.) There are plenty of posts of people using the MCs just because they want to use them for something. No one is going to haul out a PST and pull out the knife just because it’s fun to open the mail with them, it’s a chore. And even once you get through all that to get out your tool, the spread that the PST leaves you with is pretty lacking. 4 different screwdrivers!? On a modern tool, we’d (rightly) decry this as padding just to move up the tool number (interestingly, the PST was originally listed with 11 tools, but Leatherman has apparently found 3 more over the years). In a tool that feels as cluttered as the PST, I’d rather have less filler and easier deployment. Do we really need 3 different sizes of flathead? If we do, is here a reason one of them couldn’t be built into the file or something? I don’t know how much difference going to 3 tools a side would make, but it couldn’t have hurt with clumping. Or they could’ve simply made room for a more useful tool. Speaking of which, where’s the saw on this thing? It’s one of the classic multitool implements, and instead we get a file? Not a bad tool to have, but (like the 4th driver) it just feels like a weird prioritization of space. If only those plier heads weren’t in the way, there’d be room for another “full length” tool and we could have both. About the best thing I can say for the handle tools on the PST are that they all work. None of them are exceptional, but they all do the jobs they’re supposed to. But all of this is looking back with 30 years of hindsight and development. It’s only fair to try to compare the PST to other tools in it’s size/price/age bracket. So I found one of the old ‘84 Cabela’s ads, and matched it up with a 1989 SMKW Vic brochure for prices (giving the Leatherman the advantage of 5 years of inflation) and the models from the 84-85 Vic catalogs. $40 to SMKW would get you: any 91mm up to 5 layers (the Champion isn’t listed, and the Swisschamp wouldn’t have been in production yet, without the pliers or bit-driver, 6 layers is a stretch), the 93mm Soldier (the Farmer isn’t on SMKW’s brochure, but since the Soldier is only $15, it’s a pretty safe bet that it would’ve been within the price range), or the 108mm Mauser (and presumably 2 layer GAK/Trooper/Safari). The 111mm line was probably just entering development, and not available yet (though again, most cost under $40 in 1989). The closest direct comparison would probably be the 91mm Ranger, which isn’t in SMKW’s catalog, but the equivalent Master Craftsman is $40, so it seems fair enough. Length, width, and weight all come in just a bit under the PST, so size isn’t a factor. You get Vic’s trademark doublesided slipjoint deployment, making it a lot handier to actually use.Implement-wise both tools contain:
- Blade
- Can Opener
- Bottle Opener
- “Medium” Flathead
- Double-sided File
- Awl
The Ranger also adds:
- Small blade
- Metal saw
- Wood saw
- Scewdriver/nail cleaner tip
- Scissors
- 2D Phillips
- Corkscrew
- Chisel
- Tweezers
- Toothpick
(Not playing Vic’s game with counting the keyring, and the PST also has one anyway. Plus scales are just coming onto the scene, so we’ll leave those out as well.)
The PST gives you:
7. 3D Phillips
8. “Large” Flathead
9. “Small” Flathead
10. Needle-nose Pliers
11. “Regular” Pliers
12. Hard wirecutters
13. Soft wirecutters
14. RulerEven with counting the pliers/wirecutters as four seperate tools (feels like a stretch) the Ranger still comes in two tools ahead. Both have some stinkers (Vic’s chisel and LM’s pile of screwdrivers), but I think it’s a stretch to say that a mediocre (at best) pair of pliers can cancel out multiple extra tools, and better deployment. Were there that many people out there in the 80s who needed pliers, but didn’t need them to be very good, on their multitool that much? I’d love to hear from someone who was actually shopping for multitools when the PST came onto the scene. While I’m happy to sling around a Supertool or something for heavier jobs, the PST seems like it was hopelessly outclassed even when it first came out.

-
@McStitchy said:
To everyone who watched us from the sidelines...Oh, but I have one. I'm just a little hesitant to carry it. I'll get another PST before next November, though.
This was a great challenge to follow. The PST has aged well and endured. Truly a great job by awl!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
