✬ 2022 Chuck Yeager Memorial Challenge ✬
-
Thanks for the tip Marlowe 
DAY 13
Used the small blade to open several packages that arrived and are soon to be wrapped. But the best package that was opened with the small blade was this new compact. If I don’t end up giving it away as a Christmas gift I’ll look forward to carrying it in the new year :ahhh


Some really wonderful shots and uses by awl!

-
Day 13
Cut a couple shipping labels.

-
Thanks Marlowe! I think the Exec has found a home there.
@marlowe221 said:
That right there looks like a use of the key ring, which Victorinox insists is an actual tool! Great job Barry!There out to be a key ring badge...
-
It's getting harder to find one my friend.
@Farmer X said:

Warranty claim?
Damn, I miss having a manual transmission vehicle...
Here you go!Day 13
From early in the morning: the orange peeler actually did a decent job on this cellophane.
[attach id=0 msg=2385667]
[attach id=1 msg=2385667]
-
Day 14, Honey to do list post-it holder.

-
@Farmer X said:

Warranty claim?
Damn, I miss having a manual transmission vehicle...
Here you go!Day 13
From early in the morning: the orange peeler actually did a decent job on this cellophane.
[attach id=0 msg=2385667]
[attach id=1 msg=2385667]
Thanks, I think if I were in the States, I most definitely will make good use of the warranty claim. But being oversea, the shipping back and forth makes it that much harder. I end up doing a complete regrind and get rid of that chip.
@BPRoberts said:
Day 13Used the ever handy scissors to snip a loose thread on my sweatshirt.
General's Quote: I have flown in just about everything, with all kinds of pilots in all parts of the world- British, French, Pakistani, Iranian, Japanese, Chinese—and there wasn’t a dime’s worth of difference between any of them except for one unchanging, certain fact: the best, most skillful pilot has the most experience.
And a bit of commentary. I chose this quote today because a lot of stories (and honestly his own Twitter in the last years of his life) portray Chuck Yeager in a negative, bigoted light. I won't presume to speak ill of a man I never met, but I think it's interesting to see how different sources can show you very different pictures of the same person. I don't know what kind of a guy Yeager was, probably some of both like most people, but I hope all of us can be more of the guy in this quote than the alternative.

-
Day 14

After fail to use the file as a small phillips driver, I just recalled how many had used the peeler as one and it worked out great!
-
I have to agree - I have not found the end of the nail file to be a great Phillips...
-
@BPRoberts said:
I won't presume to speak ill of a man I never met, but I think it's interesting to see how different sources can show you very different pictures of the same person. I don't know what kind of a guy Yeager was, probably some of both like most people, but I hope all of us can be more of the guy in this quote than the alternative.
-
Day 14:
The small blade opened up a packet of dishwashing pods.

-
Day 14: Another day of riding around for us.

-
Day 14. A quiet day.

-
Before I went to pickup my sidekick, Patch helped me string up some beads

-
@marlowe221 said:
I will say that the 58mm version of the scissors are a little easier/safer around the nostril area than the 74mm version.I can do okay with the 74mm scissors, but you have a point.
@PitCarver said:
Patch helped me string up some beadsLookin' good!

@Explorer said:
Some really wonderful shots and uses by awl!

Day 14
No action shots, but I cut a piece of flannel to wrap a Camillus 27 in. The scissors did a tremendous job, even on the seams!
[attach id=0 msg=2385911]

-
Day 14:
I had an interesting use today!
[attach id=0 msg=2385928]
I didn’t use the Executive to take the back off the watch - needle nose pliers did that because it really needs a watch wrench and I don’t have one of those.
But I did use the end of the nail file to lift out a white plastic cover (to keep out dust?) so I could get to the battery.
And then…
[attach id=1 msg=2385928]
I used the toothpick and tweezers to actually get the battery out.
Here’s the front of the watch, in case anyone is interested. It’s a Wenger!
[attach id=2 msg=2385928]
I promptly discovered that I didn’t have the correct battery. But a quick trip to the store solved that problem. The project is now paused until I can get the kids to bed this evening.
I anticipate another use or two for the SAK this evening. First, I have to get the new tiny battery into the watch. Then, I have to get a small rubber gasket back into place before the back can go back on the watch. I expect the toothpick to be useful for both steps.



-
Great challenge awl, been following along.
Would’ve joined you again this year but after the Minichamp challenge I fancied more varietyThought you might like to see this alox Executive from the 1960’s, note the Swiss cross in the VIC logo not joined to the edge of the shield

Shameless plug - come and take a look at the 30 SAKs in 30 days challenge I’m doing this month, some interesting models and rarities for your viewing pleasure 8)

/topic/90195
-
Day 14
Opened a snack

-
@marlowe221 said:
Day 14:But I did use the end of the nail file to lift out a white plastic cover (to keep out dust?) so I could get to the battery.
The movement in your Wenger watch is rather unusually large for a quartz movement. It's nice to see, though. A full size quartz movement means the maker gives a damn and goes the extra length to have the date window placed where it esthetically belongs, rather than have it mal placed or totally omitted, just to save on production cost. Typically quartz movements are a lot smaller than their mechanical counterparts, just because there's a lot less going on in a quartz movement. To utilize these movements in larger watch cases, the makers use plastic adaptors. This keeps the movement in place and it also secures the battery in place and keeps it electrically isolated from the case back.
In the picture below, I've opened up a rather small 38mm field watch fitted with a typical, and much smaller, quartz movement. At the very top of the picture, near the center, you see the white plastic adapter that's suppose to fill the void between the movement and the watch case, as well as wraps over the battery.

In your case (pun not intended), the watch and movement are matched in size, so the adapter function is not required, but the plastic cover still adds a bit of mechanical support to stabilize the movement (and battery) and absorb some shock.
-
Day 15 - 50% completed:
I've not been posting a lot, but this challenge is flying along a lot better than the MC challenge.The exec is still in my pocket, and performs fairly OK. Yesterday I used the tip of the file to open a battery cover secured by a small phillips screw. Surprisingly it was not quite as suited for this as the Cadet file, and I almost gave up in fear of stripping the screw. With lots of deliberation and downward pressure I did eventually manage to get the screw out without significant damage to the head, but the suitability for this type of task is questionable.
As predicted December is different from other months and pocket sized tools isn't really in demand, except for cutting tools, which the exec has no shortage of. I can't help feeling a bit under equipped with the reduction in driver capability, but so far it has proven to be inconsequential.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
