3D Printer Blog
-
It arrived!

I spent Saturday building it.
Veeery carefully. :ahhh Followed a video, making sure that everything was as squared and parallel as I could.But you can see where I am with printing so far.

More bed leveling or do I need a glue stick?
I'll include the better bed springs in my next order, btw.

I don't want to level all the time.
.jpg)
.jpg)
-
That is why I suggested the CR 6 SE. All I can say...once you get the hang of manual leveling...it does get easier. Get yourself a glue stick. Also get yourself a glass build plate.
I am excited for you. Watching a 3D printer working great is one of those fascinating things that gives the viewer a deep sense of satisfaction.
You probably already know this web site...but if not...
-
I got a glass bed with the printer. :) That's why I needed the glue stick, I guess.
So I went and cycled to a shop, now I have some glue sticks.

Printing a Benchy now! This is supposed to expose problems with the printer settings, right?
.jpg)
-
I have never printed one, but yes.
-
Make sure to do the extruder calibration as well. https://all3dp.com/2/ender-3-calibration-how-to-calibrate-your-ender-3/
-
Thanks for the heads-up.

I'll do it once my proper 1kg spool of PLA arrives in the post.This is what I've printed so far with the starter filament (excluding all the test bed-leveling prints ::) ).

The 20mm calibration cube is 20.00mm ±0.02mm in the X and Y dimensions according to my micrometer. :o
On the other hand, the Z dimension (height) is 19.93mm ±0.02mm. :P
I see a tiny bulge in the bottom edges of the cube, I suspect that the nozzle is ever so slightly too close to the bed for the first layer. :ahhh
But if I try to adjust it to be better, I bet I'll manage to mess it up.
0.07mm too short doesn't sound too bad anyway..jpg)
-
@Don Pablo said:
Thanks for the heads-up.
I'll do it once my proper 1kg spool of PLA arrives in the post.This is what I've printed so far with the starter filament (excluding all the test bed-leveling prints ::) ).

The 20mm calibration cube is 20.00mm ±0.02mm in the X and Y dimensions according to my micrometer. :o
On the other hand, the Z dimension (height) is 19.93mm ±0.02mm. :P
I see a tiny bulge in the bottom edges of the cube, I suspect that the nozzle is ever so slightly too close to the bed for the first layer. :ahhh
But if I try to adjust it to be better, I bet I'll manage to mess it up.
0.07mm too short doesn't sound too bad anyway.Nice start! I like the boat!
Just try not to pablo it...

-
-
@pfrsantos said:
Just try not to pablo it...

I haven't shown the prints that went smurfed up and were binned on the first layer.

-
That looks good.

-
I guess I’ll bump this page, our son bought me a Ender 3, 3D printer for Xmas and I don’t have the slightest clue how these things work? Supposedly I’m going to be spending a few hours putting this thing together before I get to the next step but I have no clue as to what that is,,
JR
-
Congratulations on getting one. Once you get it built, I think you will have a lot of fun with it. Just be sure to watch the videos from the start of this thread, and if you read all of this, you should get a nice feel on what you can do with it, and more importantly, how to upgrade it as you get better with your Ender 3.
-
Thanks, I just spent 25min watching an assembly video and another 20min quickly going through this post from the beginning, I’m still stumped, I have no clue what I’m going to print once I get this thing built, well besides another mini model tool, maybe something to hold displayed sak’s, didn’t someone on here come up with something unique? Something for diff layered sizes? Idk I won’t be at this for a while, I never have time..
Here’s the tool that I got made some time ago, but I think it’s just too big so I want the same thing but in a smaller scale maybe in two diff smaller sizes, like half and also 1/3 or 1/4, I guess we’ll see..
JR
-
Watch a few good build videos and pause it as you built your printer. I did that with the aid of a tablet. It didn't take very long, and the whole procedure is fairly simple once you go through it step by step.
I wouldn't worry about any upgrades for now. That will come later. However, if you ever wonder what you can print...take a look over at https://www.thingiverse.com/
Search Multi Tool and see just what is available on there for that.
-
Ok, there’s a few thing I can go with, even the Mrs and kid would find funny..
JR -
I got it, an arched bridge lamp! I built one way back in the day out of a pair of two flat curtain rods that I calculated the length id need to fit the arch to be and then bent them, a simple $2, and then riveted like three pieces of plastic to hold the pair together, then bought a led strip light kit, I think I went out on this one maybe $10, put them together and ended up with the best cheap lamp I ever had, I still have it on my desk but the curtain part has seen better days and it really doesn’t stand up, and the leds are starting to fall off in some areas, but if I built a arched bridge lamp and then used the leds and glued them, this thing wouldn’t go anywhere! I love the lamp cause no mater how you’re working, you can put one hand over the other and you still don’t have shadows, it’s freaking awesome!
JRHere’s a pic of my junk one when I first built it,

-
So, can we expect new SAK scales, with different colours and designs?

-

Where news? -
@Don Pablo said:

Where news?Still sitting in the dinning room, I built it, the kid was thrilled, so he then tried like three times to print something and well it didn’t print! The first time it kept moving around on the platform, then it stayed put but then half way started again, yet, as we tried again it didn’t exist,
so he looked it up and the file for the printer disappeared, he unplugged it and turned it back on, nothing, so he found another file loaded it, and yet it wasn’t for a #3 so he had to unload it, and redo it, go fig, then the next day he had work, so it’s like every time he had a chance something went wrong like the other day well week, we lost our internet connection for a whole 6days, go fig, but here’s a pic, it’s not like we didn’t attempt something,, it’s suppose to be one of those boat thingies but with a skull on the front, the capt behind the wheel on his butt, and another coming up out of the hatch on the back flopped over if you can see them..
JR

-
It can require a bunch of tuning for sure.... :ahhh
Know where to find guides? -
Come on, your talking to a soon to be 44yr(in 3days) old plumber, the kid is basically doing everything..
JR
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login