Quality torx screw's?
-
Ideally what you need are these...

... but I've never found any small enough.
-
@Mike, Lord of the Spammers! said:
@Mike, Lord of the Spammers! said:
Not a helpful answer I know, but what don't you just peen?
Mainly because (a) I quite fancy a modular sak, and (b) because I prefer steel to brass :)
I think it will be a right PITA with screws personally. Must be something out there you could use though.
Well it goes back to my ideal Sak idea of a Farmer with a metal file and a set of Vic plier's but with proper steel pins :)
Neil, who let's face it is a bit good at modding say's it'll be difficult to say the least with steel, and I really don't fancy using brass :-\
What puts you off of brass?
-
@Mike, Lord of the Spammers! said:
@Mike, Lord of the Spammers! said:
[quote author=Benner link=topic=12794.msg239101#msg239101 date=1249158447]
Not a helpful answer I know, but what don't you just peen?Mainly because (a) I quite fancy a modular sak, and (b) because I prefer steel to brass :)
I think it will be a right PITA with screws personally. Must be something out there you could use though.
Well it goes back to my ideal Sak idea of a Farmer with a metal file and a set of Vic plier's but with proper steel pins :)
Neil, who let's face it is a bit good at modding say's it'll be difficult to say the least with steel, and I really don't fancy using brass :-\
What puts you off of brass?
[/quote]I know it's academic really, but it's just not as strong as steel is it :-\It's peace of mind thing :-\
-
You have REALLY got to go some to break the brass though. :o Anyone ever broke one?
-
Maybe Mike is not allowed to use hammers...
-
@Mike, Lord of the Spammers! said:
You have REALLY got to go some to break the brass though. :o Anyone ever broke one?
Oh I know, the brass for the hook on the back of 91mm has got a breaking strain of 240 pounds if I remember rightly :)
So why are you worrying then? :D
I know, I know, but if possible I'd like to see if I can go down the steel route before I give up and go with brass :D
-
@Mike, Lord of the Spammers! said:
You have REALLY got to go some to break the brass though. :o Anyone ever broke one?
Oh I know, the brass for the hook on the back of 91mm has got a breaking strain of 240 pounds if I remember rightly :)
So why are you worrying then? :D
me thinks its because Mike doesn't think it looks pretty on alox.
admit it :DThe problem is the end pin on a 93mm are 3mm but the centre pin and the pins for the 91mm SAKs are even smaller.
-
@Mike, Lord of the Spammers! said:
You have REALLY got to go some to break the brass though. :o Anyone ever broke one?
Oh I know, the brass for the hook on the back of 91mm has got a breaking strain of 240 pounds if I remember rightly :)
So why are you worrying then? :D
me thinks its because Mike doesn't think it looks pretty on alox.
admit it :DThe problem is the end pin on a 93mm are 3mm but the centre pin and the pins for the 91mm SAKs are even smaller.
Honestly aesthetics never really concern me where knives are concerned, especially if there users :)
So you'd have to ream out the file and pliers to fit then

-
Yes but its not an issue. Could always but a blob of solder over the ends of the brass pins... make them look prettier for you :P
-
You could use Nickle silver pin stock...that's actually commonly used for slipjoints. I'm thinking of using NS pins the next time I do an Alox mod.
-
@Mike, Lord of the Spammers! said:
@SporkBob NoPants said:
You could use Nickle silver pin stock...that's actually commonly used for slipjoints. I'm thinking of using NS pins the next time I do an Alox mod.
Is it quite workable then?
Yes, not quite as malleable as brass and possibly work hardens faster. It's no problem if you limit the hammer blows.
-
@SporkBob NoPants said:
@Mike, Lord of the Spammers! said:
@SporkBob NoPants said:
You could use Nickle silver pin stock...that's actually commonly used for slipjoints. I'm thinking of using NS pins the next time I do an Alox mod.
Is it quite workable then?
Yes, not quite as malleable as brass and possibly work hardens faster. It's no problem if you limit the hammer blows.
Let us know how you get on then mate

-
I'm pretty certain that the Alox knives use nickle silver pins. I reused the pins from a Farmer to re-assemble my old Electrician.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login