First Pliers-Based Multi-Tool?
-
@HarleyXJGuy said:
Overthinking things is why we are all here.As far as the proprietary bits that only matters for the actual exchanger. If you have the regular or ratchet extension you can use regular 1/4” bits.
Still feel like the Bond would be great for you. The combination of solid first gen Pliers and 3D Phillips in a simple package.
Wait... the Bond has a 3D Phillips? How did I miss that?!?
Hmmm.... I guess what you give up with the Bond is the ability to use the ratcheting bit driver but... I could live with that.
-
@marlowe221 said:
There are other things that are just total "unknowns" for me. Like, whether I want outside opening tools or tools that are only on the inside of the pliers handles. I know that I don't particularly care about one-hand opening stuff one way or the other (I wouldn't use SAKs if I did...). But as far as tools on the inside versus the outside of a tool goes, well, I have no idea!All other things being equal, what I would call outside opening tools (i.e. tools that are exposed when the MT is in the closed/folded position) are much quicker to use than inside opening tools (i.e. tools that are hidden inside the handles when the MT is in the closed/folded position).
This is because the process is shorter…
To use outside opening tools:
- Draw MT
- Open desired tool
- Use tool
- Close tool
- Replace MT
To use inside opening tools:
- Draw MT
- Open MT
- Open desired tool
- Close MT
- Use tool
- Open MT
- Close tool
- Close MT
- Replace MT
So if speed is a consideration (either because you want to able to deploy the tool quickly in an emergency, or because you will use it frequently and the time saved on each use will add up), then outside opening is the way to go. If you only access those tools occasionally and you’re not concerned about quick emergency access, then outside vs. inside opening tools probably isn’t much of a factor for you either way.
-
@marlowe221 said:
Wait... the Bond has a 3D Phillips? How did I miss that?!?Hmmm.... I guess what you give up with the Bond is the ability to use the ratcheting bit driver but... I could live with that.
They do sell an adapter for the 3D Phillips that makes it a 1/4 inch driver and that will allow you to still use the ratchet driver
;) -
This is the LM Bit Adapter
It is shown here with a ST300 but works with all the square shank 3D Phillips by Leatherman and on a few others that aren't actually designed for it either 

It comes in regular stainless as well as the black oxide that is featured here

-
Vic Spirit X. I've carried one for work for the last 10+ years. Inbetween, tried a LM Wave, LM Rebar and Gerber MP400, but keep going back to the Vic.
-
How do you do it :ahhh I can never get along with the Spirit and when I try, I am always glad to go back to something else and to not be carrying it :ahhh

-
@Poncho65 said:
How do you do it :ahhh I can never get along with the Spirit and when I try, I am always glad to go back to something else and to not be carrying it :ahhh
Wait wut?
The Spirit is my favorite stand-alone tool. The outside opening, tool selection and build quality. What is it that you don’t get along with?
-
@marlowe221 said:
Wait... the Bond has a 3D Phillips? How did I miss that?!?Hmmm.... I guess what you give up with the Bond is the ability to use the ratcheting bit driver but... I could live with that.
Also lose locking tools if that matters to you.
-
@HarleyXJGuy said:
Wait wut?The Spirit is my favorite stand-alone tool. The outside opening, tool selection and build quality. What is it that you don’t get along with?
Just doesn't feel as good to use and I really can't seem to tell that the build quality is as superb as everyone says

If I was going MT only then I would either go with a Charge or a Rebar with added scissors

And why couldn't the Spirit have the regular SAK scissors like a Swisstool does
:D -
@Poncho65 said:
Just doesn't feel as good to use and I really can't seem to tell that the build quality is as superb as everyone says
If I was going MT only then I would either go with a Charge or a Rebar with added scissors

And why couldn't the Spirit have the regular SAK scissors like a Swisstool does
:DBiggest difference that makes the Spirit feel nicer them LM tools for me is the individual springs. Tool clumps are for suckers.
The not SAK Scissors is so lame imo.
-
@HarleyXJGuy said:
Also lose locking tools if that matters to you.What does that mean? That it’s a slip joint tool?
If so, that’s fine with me. All I’ve ever owned up til now are SAKs and a couple of Sodbuster Jrs.
-
If the wire strippers handle gauges of wire used when working on electronics, seek out a Squirt E4/ES4. The trick will be finding one that someone doesn't want a king's ransom for. Though they're probably at the outer limits of pocketability, I could also suggest a Wave. The fine screwdriver could come in handy for electronics work.
Gerber were pretty popular when I was in the Navy. My fellow Sailors and I liked the ability to deploy the pliers with a flick of the wrist. I presently have a Suspension NXT, which is decent, but not built to the same standard as a Leatherman. I think SOG used to be decent, and I also think their warranty has changed for the worse recently.
And this being your first PB multi is a good way of looking at it. I bought my Rebar intending that I'd take it with me on trips into the bush. Then I got a Signal, and it is now the tool that will come into the bush with me
-
Oh, is the fine screwdriver a Phillips? I thought it was a flathead when I looked at it.
And yeah, there’s a pocket clip available for the Wave so someone at Leatherman must consider it pocketable!
-
@marlowe221 said:
What does that mean? That it’s a slip joint tool?If so, that’s fine with me. All I’ve ever owned up til now are SAKs and a couple of Sodbuster Jrs.
Yeah the Bond is a slip joint but a very strong slip joint.
-
I don’t think I can add anything new to the MT suggestion, but I can suggest you take a look at the favorite MT/SAK combo thread: /post/2391507#lastPost
I’ve posted several combos there and there’s lots of similar analysis of tool redundancy and unique tool sets.
My favorite dad and home work combos: 1) Wave+ with ratchet and 1/4” bits (also a few flat LM bits) and Electrician. 2) Spirit X butter blade and Waiter. I’ll also carry a PST and Compact or Explorer if I’m not actively working on a project. A Midnite Minichamp always sits in my pocket to compliment those pairs.
-
No multi-tool has yet been found (for me) to replace my Swisstool Spirit X ! :ahhh

-
@Vadim said:
No multi-tool has yet been found (for me) to replace my Swisstool Spirit X ! :ahhh
I’ve been trying really hard to pretend the Spirit doesn’t exist!
Nah, it looks amazing. I just, uh… have $50 in store credit at REI I’m trying to use and they don’t carry any of the Vic PBMTs.

It’s silly. But when you have some free money…
-
@marlowe221 said:
Oh, is the fine screwdriver a Phillips? I thought it was a flathead when I looked at it.It's reversible, and it locks. Hopefully my photo shows that okay.
[attach id=0 msg=2402129]
I awlso took a photo of it opened up.
[attach id=1 msg=2402129]
One quirk of the Wave is that you have to open it to use the ruler. Mine is a second-generation Wave, or New Wave. I believe the current iteration has replaceable wire cutters.
Hope this has been helpful!



-
Vic Spirit would get my vote. If you have some free REI dollars, maybe give a Rebar a try.
-
@Poncho65 said:
How do you do it :ahhh I can never get along with the Spirit and when I try, I am always glad to go back to something else and to not be carrying it :ahhh

Had a Swiss Tool and a Spirit and sold both. Tool clumping can be a plus IMO in cold, dirty or wet slippery conditions. Vics are pretty but IME aren't as easy to use in those situations as Leathermans or Gerbers.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login