Show off your Sak mod's!
-
When I started my SAK-mod-building, I started with single layer Alox models. I wanted them to have a feeling of old early 1900 century knives
[attach id=0 msg=2405524]
Brass or nickel silver bolsters with bone or wood scales. Brass liners and pins. They get a fair bit heavier than the original aluminum and celidor
-
@BarbaBaba said:
When I started my SAK-mod-building, I started with single layer Alox models. I wanted them to have a feeling of old early 1900 century knives
[attach id=0 msg=2405524]
Brass or nickel silver bolsters with bone or wood scales. Brass liners and pins. They get a fair bit heavier than the original aluminum and celidorThose, and all your others posted here are beautiful.

The moose horn has a very classic look to it, reminds me of something my grandfather had. -
@Enginears said:
Those, and all your others posted here are beautiful.
The moose horn has a very classic look to it, reminds me of something my grandfather had.Thank you so much! I will take a fresh pic of it with all tools out, and showing how I finished the moose horn. My initial plan was to have it bone-white. It had some nice patina in it, so I enhanced that instead
-
@BarbaBaba said:
Maybe it´s me who missunderstand what you mean, or you missunderstod my pics... It´s two different knives :)
The one with Ironwood and titanium is not finished in the pic, just took a pic while putting it together :)
[attach id=0 msg=2405523]
here is the finished knife :)Nope, my bad! I thought it was just one. The good thing is that I get to
two knives instead of just one!:D :D :D :D
-

@pfrsantos said:
Nope, my bad! I thought it was just one. The good thing is that I get to
two knives instead of just one!:D :D :D :D
-
My latest little build. 84mm Sportsman with brass liners and pins. Acid washed tools and African Ebony scales.
[attach id=0 msg=2406292] [attach id=1 msg=2406292] [attach id=2 msg=2406292]
Polished inside. Just waiting for the oil to dry before final polishing of the ebony :)


-
@BarbaBaba said:
My latest little build. 84mm Sportsman with brass liners and pins. Acid washed tools and African Ebony scales.
[attach id=0 msg=2406292] [attach id=1 msg=2406292] [attach id=2 msg=2406292]
Polished inside. Just waiting for the oil to dry before final polishing of the ebony :)

-
@BarbaBaba said:
When I started my SAK-mod-building, I started with single layer Alox models. I wanted them to have a feeling of old early 1900 century knives
[attach id=0 msg=2405524]
Brass or nickel silver bolsters with bone or wood scales. Brass liners and pins. They get a fair bit heavier than the original aluminum and celidorThese look great. Am I right in thinking the bolsters are connected under the wood to form the outermost liner and the wood just sits in the dish formed by the connecting plate?
-
@Helvetica Bold said:
These look great. Am I right in thinking the bolsters are connected under the wood to form the outermost liner and the wood just sits in the dish formed by the connecting plate?*On the amber bone model in the pic. The bolsters are nickel-silver and are soldered to the brass liners, the amber bone scales are glued and peened to the brass liner.
*The white model have black G-10 liners and white G-10 scales. Glued and peened together :) -
@Helvetica Bold
Here is another one with nickel-silver bolsters and stained Ox-bone, also with brass liners and pins (except for the pin in the bolster wich also is nickel-silver[attach id=0 msg=2407023]
-
Didn't think this deserved it's own topic, I'm pondering whether to add a cybertool to my bladeless mod.
Obviously I need to decide for myself if it's worth it, but what's your opinions on the proposed toolset for an urban SAK?
Whilst I'm at it, also considering taking off the saw, because again, urban SAK.
Pros: Cybertool!
Cons: Extra thickness?[attach id=0 msg=2408988]
[attach id=1 msg=2408988]

-
What would be bothering me personally, is the redundancy of the philips and the cybertool. I would probably need to remove the magnifier/philips layer to be happy with the added cybertool.
-
I carried my Cybertool Lite for a while, expecting to be securing and/or unscrewing everything in sight... But mostly I encountered either standard Phillips screws, or allen and torx bolts that were larger than any of the bits in the Cybertool range, for which I have a pocket ratchet set.
I still use teh Cybertool, but only when working on electronics, but even then I tend to have a far wider range of dedicated tools already on hand. It's more of a showpiece than anything else. -
@Annihilator said:
What would be bothering me personally, is the redundancy of the philips and the cybertool. I would probably need to remove the magnifier/philips layer to be happy with the added cybertool.That's a good point.
I definitely see what you mean.@Tasky said:
I carried my Cybertool Lite for a while, expecting to be securing and/or unscrewing everything in sight... But mostly I encountered either standard Phillips screws, or allen and torx bolts that were larger than any of the bits in the Cybertool range, for which I have a pocket ratchet set.
I still use teh Cybertool, but only when working on electronics, but even then I tend to have a far wider range of dedicated tools already on hand. It's more of a showpiece than anything else.Thanks for the carry experience!
Yeah, maybe I'm not going to find many opportunities in which a cybertool is needed.
I realized that this bladeless mod has most of the tools from a swisschamp, except for the pliers, fishscaler, and of course the blades. Right now it's significantly thinner than a swisschamp, but there wouldn't be much thickness difference if I added on the cybertool. At which point I might go "maybe I should just use the swisschamp" if I end up thinking the cybertool isn't very useful in practice.

-
Hi gents, just got into modding SAKs and this forum has been a beacon of light for me as a beginner. Not to forget Cody at Fit 2 Survive's Youtube channel for the awesome tutorials.
I'm presenting my personal custom Roadman. Inspired by one of Cody's creation with includes the Spyderco Roadie but in a 84mm frame. Started out as a Tinker Small, adding a scissors from a Wenger. Added the Roadie blade and used 2 X Recruit backspring and custom spacer.
[attach id=0 msg=2410013]
[attach id=1 msg=2410013]
[attach id=2 msg=2410013]
[attach id=3 msg=2410013]




-
That looks really nice
I have asked myself what an impact the acid wash has on the sharpness of the tools like the can-opener and the scissors. Would you share some experience? -
[attach id=0 msg=2410193]
I built my first 3 layer 84mm :) . I prefer 2 layer 84mm´s when it comes to pocket carry, so I tried to make it as thin as possible. I used 0,5mm brass for liners and home made jute micarta for the scales. Unfortunately it turned out a bit on the thick side anyway, so I sanded the scales down a bit more (and needed to peen it again). Now it´s about the same thickness as a 2 layer, but the nice pattern is gone...![IMG_9250[28807].jpg](/assets/uploads/_imported_attachments/migrated/552022_IMG_9250%5B28807%5D.jpg)
-
@Annihilator said:
That looks really nice
I have asked myself what an impact the acid wash has on the sharpness of the tools like the can-opener and the scissors. Would you share some experience?You will need to sharpen them again when they are done. I do my washing in a plastic jar with shards from broken coffee cups, and ceramic shards will dull the sharp edges
-
@BarbaBaba said:
You will need to sharpen them again when they are done. I do my washing in a plastic jar with shards from broken coffee cups, and ceramic shards will dull the sharp edgesI figured, but how do you sharpen the round edge of the can opener, the edges of a wenger scissors or a woodsaw? I'd imagine that is an extreme pain in the a**.
-
@Annihilator said:
I figured, but how do you sharpen the round edge of the can opener, the edges of a wenger scissors or a woodsaw? I'd imagine that is an extreme pain in the a**.For the can opener, I took the ceramic rods from my Sharpmaker and just resharpen it. It doesn't have to be razor sharp. As for the Wenger Scissors, they are self-sharpening so no resharpening required. The saw probably would be definite pain.. but you can protect the teeth with nail polish before acid-etch.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login