Show off your Sak mod's!
-
@BarbaBaba said:
When I started my SAK-mod-building, I started with single layer Alox models. I wanted them to have a feeling of old early 1900 century knives
[attach id=0 msg=2405524]
Brass or nickel silver bolsters with bone or wood scales. Brass liners and pins. They get a fair bit heavier than the original aluminum and celidorThese look great. Am I right in thinking the bolsters are connected under the wood to form the outermost liner and the wood just sits in the dish formed by the connecting plate?
-
@Helvetica Bold said:
These look great. Am I right in thinking the bolsters are connected under the wood to form the outermost liner and the wood just sits in the dish formed by the connecting plate?*On the amber bone model in the pic. The bolsters are nickel-silver and are soldered to the brass liners, the amber bone scales are glued and peened to the brass liner.
*The white model have black G-10 liners and white G-10 scales. Glued and peened together :) -
@Helvetica Bold
Here is another one with nickel-silver bolsters and stained Ox-bone, also with brass liners and pins (except for the pin in the bolster wich also is nickel-silver[attach id=0 msg=2407023]
-
Didn't think this deserved it's own topic, I'm pondering whether to add a cybertool to my bladeless mod.
Obviously I need to decide for myself if it's worth it, but what's your opinions on the proposed toolset for an urban SAK?
Whilst I'm at it, also considering taking off the saw, because again, urban SAK.
Pros: Cybertool!
Cons: Extra thickness?[attach id=0 msg=2408988]
[attach id=1 msg=2408988]

-
What would be bothering me personally, is the redundancy of the philips and the cybertool. I would probably need to remove the magnifier/philips layer to be happy with the added cybertool.
-
I carried my Cybertool Lite for a while, expecting to be securing and/or unscrewing everything in sight... But mostly I encountered either standard Phillips screws, or allen and torx bolts that were larger than any of the bits in the Cybertool range, for which I have a pocket ratchet set.
I still use teh Cybertool, but only when working on electronics, but even then I tend to have a far wider range of dedicated tools already on hand. It's more of a showpiece than anything else. -
@Annihilator said:
What would be bothering me personally, is the redundancy of the philips and the cybertool. I would probably need to remove the magnifier/philips layer to be happy with the added cybertool.That's a good point.
I definitely see what you mean.@Tasky said:
I carried my Cybertool Lite for a while, expecting to be securing and/or unscrewing everything in sight... But mostly I encountered either standard Phillips screws, or allen and torx bolts that were larger than any of the bits in the Cybertool range, for which I have a pocket ratchet set.
I still use teh Cybertool, but only when working on electronics, but even then I tend to have a far wider range of dedicated tools already on hand. It's more of a showpiece than anything else.Thanks for the carry experience!
Yeah, maybe I'm not going to find many opportunities in which a cybertool is needed.
I realized that this bladeless mod has most of the tools from a swisschamp, except for the pliers, fishscaler, and of course the blades. Right now it's significantly thinner than a swisschamp, but there wouldn't be much thickness difference if I added on the cybertool. At which point I might go "maybe I should just use the swisschamp" if I end up thinking the cybertool isn't very useful in practice.

-
Hi gents, just got into modding SAKs and this forum has been a beacon of light for me as a beginner. Not to forget Cody at Fit 2 Survive's Youtube channel for the awesome tutorials.
I'm presenting my personal custom Roadman. Inspired by one of Cody's creation with includes the Spyderco Roadie but in a 84mm frame. Started out as a Tinker Small, adding a scissors from a Wenger. Added the Roadie blade and used 2 X Recruit backspring and custom spacer.
[attach id=0 msg=2410013]
[attach id=1 msg=2410013]
[attach id=2 msg=2410013]
[attach id=3 msg=2410013]




-
That looks really nice
I have asked myself what an impact the acid wash has on the sharpness of the tools like the can-opener and the scissors. Would you share some experience? -
[attach id=0 msg=2410193]
I built my first 3 layer 84mm :) . I prefer 2 layer 84mm´s when it comes to pocket carry, so I tried to make it as thin as possible. I used 0,5mm brass for liners and home made jute micarta for the scales. Unfortunately it turned out a bit on the thick side anyway, so I sanded the scales down a bit more (and needed to peen it again). Now it´s about the same thickness as a 2 layer, but the nice pattern is gone...![IMG_9250[28807].jpg](/assets/uploads/_imported_attachments/migrated/552022_IMG_9250%5B28807%5D.jpg)
-
@Annihilator said:
That looks really nice
I have asked myself what an impact the acid wash has on the sharpness of the tools like the can-opener and the scissors. Would you share some experience?You will need to sharpen them again when they are done. I do my washing in a plastic jar with shards from broken coffee cups, and ceramic shards will dull the sharp edges
-
@BarbaBaba said:
You will need to sharpen them again when they are done. I do my washing in a plastic jar with shards from broken coffee cups, and ceramic shards will dull the sharp edgesI figured, but how do you sharpen the round edge of the can opener, the edges of a wenger scissors or a woodsaw? I'd imagine that is an extreme pain in the a**.
-
@Annihilator said:
I figured, but how do you sharpen the round edge of the can opener, the edges of a wenger scissors or a woodsaw? I'd imagine that is an extreme pain in the a**.For the can opener, I took the ceramic rods from my Sharpmaker and just resharpen it. It doesn't have to be razor sharp. As for the Wenger Scissors, they are self-sharpening so no resharpening required. The saw probably would be definite pain.. but you can protect the teeth with nail polish before acid-etch.
-
Woodsaw would be sharpened with the appropriate sawfile, just like any other woodworking handsaw.
-
@Annihilator said:
I figured, but how do you sharpen the round edge of the can opener, the edges of a wenger scissors or a woodsaw? I'd imagine that is an extreme pain in the a**.Patience and time is something you should always have when doing any build ;)
-
I call this the Woodchipper. My favorite set of survival tools for bush crafting in the wilderness. Two handy blade shapes, the inline awl/reamer, wood saw, wood/metal file and metal saw, and a beer opener. Perfection.
This was a relatively straightforward build, except for the file layer, as the pivot hole in the file needed to be enlarged to fit a 93mm alox knife. I’ve read that many use a carbide drill bit for the hole, but I went a different way. I had a set of cheap Pittsburg diamond files that I bought at Harbor Freight many years ago. One round needle file from this set just happened to have a maximum outer diameter exactly the same size as a 93mm pivot hole.
So all that was required was about 15 or 20 minutes of filing out the hole, until the file could slide right through. Then all I had to do was assemble, using an old 93mm wood saw spring. Easy peasy. I installed the file in the opposite direction of the wood saw, to give the closed knife some symmetry of shape, leaving a nice rear facing nail nick that was thankfully fully exposed. Since the file is next to the main blade layer, ease of opening is identical to that of a SwissChamp.
The file set: https://www.harborfreight.com/needle-file-set-10-piece-69876.html
I think the diamond needle file really opens up some good possibilities to easily adapt 91mm tools to 93mm knives.







-
good work Buzzbait, that is a cool mod. I also love the scales. -
Almost a vagabond, with minichamp for comparison. Made from bits I had left over from other mods.

I adapted a pen blade into a hook and changed the layout to put the two thick tools in the middle. I needed an extra liner but my OCD needed more symmetry


After a bit of reorganising, the nail nicks are all accessable.

11mm thick, so <1mm thicker than a rambler, but I have no scale slots


-
My latest Sportsman build with homemade linen micarta. The center liner is 1mm brass and the micarta have 0,15mm brass liners inside. All brass rivets and the original shield is re-used.
[attach id=0 msg=2413975]
The original linen fabrik was red just like an original celidor, but it took to the epoxy in a wierd way
[attach id=1 msg=2413975]
I kind of like the look even if it´s not as expected. I call it Dexters weekender...

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login