EDC Bit Ratchets
-
This is going to sound weird but I started carrying the Klein ratchet as a fidget toy. I get really impatient sometimes in meetings that drag on so I will swing the ratchet by the finger loop and catch in my palm (feels cool) or catch the knurling in my palm and rotate. Makes a satisfying clicking sound.
-
-
-
-
-
-
We had time to realize as the world slow just enough the stresses we're under.
Kinda cool you've used the ratchet that way. Whatever seems to work keep doing it. There are far worse things you could be fidgeting.
-
-
-
I am settling in a new place, but most things are done. I will resume reviews shortly.

In the meantime:
Not a bad video, he covers many ratchets. He did not like the Ares/Sabrecut, which is sad. It's been my edc for over two years I think. He did not like the Klein either. Adam uses the Klein, I liked it as well. Well, you can't make everyone happy, I guess.
https://www.youtube.com/watch?v=sP9EzDo0lQs -
Wow, I have just found the worst mini ratchet ever. Do not buy this. :ahhh
I've written the review for this and one more. Will take photos and post soon.
-
-
@Don Pablo said:
You can't tell me what not to buy!
Looking forwards to the scathing review.

Don't buy this either.

I have four reviews written, two favourable, two not so much. I'll start taking pictures and posting soon.
-
Knowing what not to buy is as helpful with what to buy

-
Also, glad to hear you are settling in to your new place, RP

-

Inwell Mini Ratchet
(can also be found branded by BDMetals, ElumPlus, Tommars, Torena, and unbranded)
Weight: 77g
Kit weight: 649g
Length: 94mm
Head width: 26mm
Head clearance with standard bit: 32mm (adds 7mm)
Teeth count: 46
Minimum swing arc: 7.8°
Bit retention: magnet
Extension bit retention: magnet and locking
In-line driver: no
Bit material: S2 steel
Socket material: Chromium-Vanadium
Handle material: Zinc Alloy
Price: $26 with 50 bits, 6 imperial sockets, locking extension, case.Sockets: 3/16", 7/32", 1/4", 5/16", 11/32", 7/16"
Bits:
Phillips: #1 x2, #2 x4, #3 x2
Robertson: #1, #2 x2, #3
Allen: 1/8 x2, 9/64 x2, 5/32 x2, 3/16 x2
Slotted: 3 x2, 4 x2, 5 x2, 6 x2
Torx: 10 x2, 15 x2, 20 x2, 25 x2, 27 x2, 30 x2, 40 x2
Tamperproof Torx: 10, 15, 20, 25, 30, 40
Square socket adapter
Accessories
The Inwell ratchet comes in a two-story plastic case, with 50 S2 bits, six Imperial sockets, and a locking bit extension. The top half of the case slides back. Everything clicks into place and survives the up-side-down test, but the bits are not held as tightly as everything else. The case leaves quite a lot of unused space, but at least everything can be identified and removed without getting in the way of each other.
There is a lot of redundancy in the bit selection. Out of 50 bits, 21 are duplicates of others, without counting the Torx and Tamperproof Torx.
There are stress signs in the plastic tabs that hold the ratchet in place. The case came like that, so these may not hold up.
Inserting a bit in the extension locks it. Pulling back the orange collar slightly ejects the bit.
Dimensions
At 94mm long, this is about average. It is the second heaviest, at 77g, only a gram lighter than the Titan swivel head ratchet. This is definitely heavy for its length and lack of features. The ratcheting socket protrudes from the body, and it also adds 7mm to a bit's clearance. It also has the widest head so far, at 27mm.Teeth Count
With 46 teeth, this is about average. Certainly not bad compared to others, although for how wide the head is, it seems a little low.Bit Retention
The Inwell has a rather weak magnet to hold onto the bits. The extension is as good as it can get, since the bits lock into place.
Bit compatibility
The ratchet can be used with stubby bits, thanks to the shallow socket and weak magnet. Double-ended bits cannot be used.
The extension can be used with stubby bits, although only the very tip will protrude. Double ended bits cannot be used.Switch action
The switch is very stiff, not the easiest to use. It sits in a groove, but it seems as if the groove was cast for another switch. The switch seems just a hair too long for it.
Ease of use
The Inwell ratchet is rather short but quite heavy. The center of gravity is just behind the head. It is so head-heavy, that it wants to fall out of my hand. The head is wide, and the whole body tapers from the head down. When pinching the neck, my fingers want to naturally slide down the body, following the taper. This changes my grip from three fingers to two. There is very little length to hold onto, especially compared to pretty much every other ratchet so far.
The ratcheting action gets sticky at times. It feels like a few teeth are ground crudely. The mechanism is held in by two PH1 screws, so in theory this can be disassembled.
Due to the rather weak magnet, bits with tight fit, like Allen, tend to stay in the fasteners instead of the ratchet.
The ratchet has no features to speak of. We have seen in-line bit drivers, knurled thumb wheels, lanyard holes, on-board bit storage, exposed magnets, swivel heads, flex heads, extreme bit compatibility. The Inwell has nothing extra.
Construction Quality
Construction quality was apparently focused on the accessories. The bits are S2 steel, and very well made. The sockets, the extension, even the case, these are just fine.
The ratchet seems out of place, with an unpolished finish, cast marks, a few unchamfered spots, a sticky ratcheting action, pitting. The switch has some play in the head, and can be pushed in and out about a millimeter.
Portability
The case is massive. Not an edc one by any stretch. Heavy, blocky, lots of unused space.
The ratchet is pretty much the same. Too heavy, too wide, the ratcheting socket protrudes from the head. There are no additional features to provide any sort of multi-functionality and versatility. Even ratchets with no fancy features, like the Mulwark or Bosch, still offer portability, bit compatibility, ergonomics.
Putting the Inwell in a multi-tool pouch may be an issue. The ratchet is very head-heavy, short, and tapers dramatically. It seems like it would be the first ratchet to fall out of a side sleeve.
Value
With 50 S2 bits, six sockets, a locking bit extension, and a half decent case, it is hard to say that this has no value. As with many ratchets that come in sets, the accessories are far better than the ratchet. Still, as far as edc is concerned, the Inwell fails at pretty much all aspects. The ratchet by itself offers nothing interesting. Every other ratchet, even the ones that were not recommended for edc (Bosch, Trojan), or at all (Titan swivel head, LaBear, Ovatt) would be better for edc.Conclusion
The Inwell was deceiving. It looked really high-end, with its nice box, fancy extension, proper bits. Well, mistakes were made. The Inwell ratchet is featureless. Every other ratchet so far has a few extra features to add to versatility, ergonomics, portability, or at least cost much less than the Inwell set. The Inwell has nothing whatsoever. Every single ratchet we have seen so far has more to offer. Even as a set, this falls short. If this was open to sets, there are far better sets out there. Not recommended.Pros
-50 S2 steel bits, six sockets, locking bit extension.Cons
-Featureless.
-Very wide head.
-Heavy and head-heavy.
-Ratchet action is sticky.
-Subpar ergonomics.
-Head adds 7mm to bit clearance.
-A lot of redundancy in bits.
-Case leaves a lot of unused space.If you liked this ratchet, what's wrong with you? Also check out:
-
-
True. Let's be honest here. Some ratchets are just trash, and others, you already know they're good, like the Prestacycle, Topeak, etc.

Still, there is a little more to this. Take the Mulwark ratchet, for example. It started out as the worst in this thread, the bottom of the barrel. And I still recommended it then, because it was worth it, which is saying something. And I still recommend it now, having found some absolutely terrible ratchets.
The first mini ratchet I had was the same as the Mulwark, but branded by Neiko. I took apart and put together lots and lots of furniture with it. It was always just fine. No complaints. Sure, it has no in-line driver, no knurled finger wheel, only 16 teeth, not a solid, one-piece body. But is works just fine. It also comes with 6 regular bits and 13 stubby bits. Even when I replaced it with the Ares ratchet, I still carried the Mulwark bits. That design is fine. Sure, others have more features. Heck, the Vessel ratchet is the same basic design but has so many features. But the Mulwark/Neiko design works. It was the least fancy one. The least good one. But not worse, as in terrible. It is far from terrible.
-
Edited Mulwark Review. Removed
-
Do you have FACOM R180J31 1/4″ mini set, tho its bit expensive set but im just curious is it really worth money, i have seen before Facom bigger tools and those has been worth of money but not sure is this mini set worth it.
Only Tools Matters
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

.jpg)
.jpg)
.jpg)









