3D Printer Blog
-

Where news? -
@Don Pablo said:

Where news?Still sitting in the dinning room, I built it, the kid was thrilled, so he then tried like three times to print something and well it didn’t print! The first time it kept moving around on the platform, then it stayed put but then half way started again, yet, as we tried again it didn’t exist,
so he looked it up and the file for the printer disappeared, he unplugged it and turned it back on, nothing, so he found another file loaded it, and yet it wasn’t for a #3 so he had to unload it, and redo it, go fig, then the next day he had work, so it’s like every time he had a chance something went wrong like the other day well week, we lost our internet connection for a whole 6days, go fig, but here’s a pic, it’s not like we didn’t attempt something,, it’s suppose to be one of those boat thingies but with a skull on the front, the capt behind the wheel on his butt, and another coming up out of the hatch on the back flopped over if you can see them..
JR

-
It can require a bunch of tuning for sure.... :ahhh
Know where to find guides? -
Come on, your talking to a soon to be 44yr(in 3days) old plumber, the kid is basically doing everything..
JR -
:D
Can ask if he's looking at how to troubleshoot
Dad needs his printer up and running! -
Dad just needs less stress!
JR -
Been some time since I used filament printers, but that looks like too hot and or too much extrusion.
Depending on the material the temperature window might be narrow.
-
I have no clue, it also doesn’t help that everything is also in metric, I mean so is the printer but I’m still sitting here
idk, would the base be to hot, but that’s what it said to be left at, yet the printer says to like triple it? The same with the white stuff, that came with the printer vs, the huge spool the kid also bough, so I’m sure both are going to be diff, but
idk? I’m a plumber, when it comes plastic, I use a primer and glue to make it stick so it won’t leak.. that and the glue smells good, 
JR -
@MadPlumbarian said:
idk, would the base be to hot,If the base is too hot you'd likely see it at the bottom of the print as melting or deformation.
What I meant was the extrusion temperature - that one has to be hot enough to melt and weld to previous laid plastic, but not so hot that it looses shape or runs out too much. There is likely some information included with the material as a starting point. Then it is down to the precision of your printer what temperature you actually have. With a heated bed and no housing you might also experience than high models get colder as you move away from the platform.
Then there is extrusion speed - how quickly is that thing spewing out melted plastic? If it puts down more than necessary for the actual print the excess will go somewhere and likely not look pretty.
I can add layer heights too - for each layer the printer will lift a bit. Too much and there will be a lack of connection and weld to the previous layer. Too low and the model will be compressed in height and with too much plastic in the walls. That one is fairly easy to calibrate though as you'll know the height of the model and can adjust height and layers according to the welding.
-
Sorry about that. I guess the last time I was on this site was in the wanning days of 2022. I see the last response was on March 5th. I take it you have figured out the issue?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login