What's on your keychain?
-
Yes I recall now. Guess I could have looked a little closer too
.Might have to pick up some G Clips.
-
Little update, I must say that keyring setup carry’s very well, I hardly know it’s there, the one little hiccup is a specific pair of convertible pants I have, the belt loop is not in that normal spot on the side, it’s more toward the back, so when sitting in the kids car I have to pull the keys aside so I don’t sit on them, but other pants and shorts I haven’t noticed anything and they carry well,,
JR -
I have pants like that so I know what you mean, the loop is either too far to the back or too close to the front -
Nice its working out. I hear ya on the belt loops. -
Not on my keyring, yet. As of now it's attached to an Alox MiniChamp.
Picked it up off of the Temu site to test out their shipping.

-
Good luck......
-
I know the GeeKey has a smoking pipe built in and although I no longer smoke makes it tempting just in case

Let us know if you try it PC be interested to know if it works

-
Sorry, had to Google to see it!
Yes, let us know if it works or just a gimmick? -
No pipe on the clone. ¯\_(ツ)_/¯
I'm a cigar guy these days anyway.
The other functions seem to be fairly good compared to similar tools.
I'm pleased. -
I so thought about getting one of those, I mean heck I got plenty of room on the keychain I just modified, besides the only tool I have on it is a small sak,,

JR -
Clip may come off in the fall when I wear a jacket.

-
Did I say Nitecore, it's the other Nite

-
Got the Tiki today. Clip and split ring not arthritis friendly. Cheap plastic? But it is Bright!
Will have to test, maybe for the nightstand? -
@UscgSal said:
Got the Tiki today. Clip and split ring not arthritis friendly. Cheap plastic? But it is Bright!
Will have to test, maybe for the nightstand?NO, that split ring isn’t friendly, that’s why it’s on one of the G-biners, I didn’t think it was cheap, it seamed pretty good, I must say it’s come in handy!
JR -

...and a Classic goes back on tomorrow, though not a 'key' ! -
@PitCarver said:
No pipe on the clone. ¯\_(ツ)_/¯
I'm a cigar guy these days anyway.
The other functions seem to be fairly good compared to similar tools.
I'm pleased.I actually checked and the original Geekey still has the pipe feature. The clone doesn't but has the opening of the mouthpiece drilled in about 1/4 inch. I guess if you were handy enough you could drill it out, but there's definitely not enough room in the bowl.
Here's the listing of the various functions.
One, that I think is cool is the design of the wrenches. Standard ón one side and metric on the other. Haven't tried them out yet but I have used the Phillips screwdriver on a bench I made years ago. Worked just fine.
-
I’m sure some of you have seen or heard of the inchworm or centipede keychains, well I kinda wanted one but wasn’t paying the price, so I looked around but couldn’t find anything cheaper, so I figured why not try something myself?
I just so wish I had a lathe, anyway, I looked around the house trying to come up with something I could use and well, I found these, simple crochet needles, now, how do I make the marks that don’t wear off? So I marked the inch and half inch marks with a thin marker, went to the workstation and put the needle in the drill, I tried a few things that didn’t really work but found my triangle file and it work perfect, I made the inch a little wider then the half’s, then since it was working, I marked the quarters and then lightly scored lines, it didn’t come out perfect but it kinda worked, I mean hey I used a drill laying on a workbench with the trigger pull with a clamp, I then used a grinder and cut the end off and curved it, and put a hole in the middle so I can put a split ring on it,,
JR
-
A triangle file would also work. Looks like you might like a pocket wrench. They have mm and inch. 2 inch total marked off in 1/16th increments. Pretty handy.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
