*** The Dean 51 Traditional Challenge 2023 ***
-
Lots of beautiful knives already

Day 2:
Opened a pez packet for the kid

-
-

Sent fra min M2002J9G via Tapatalk
-
So today I'm going with one of my personal favourites, the Case Medium "Working" Jack. Simple black synthetic covers and unpolished SS blades. This is a great knife for those who find the Peanut a little too small.
Peanut is definitely too small for this guy.
That black synthetic looks great, is it the same stuff as the yellow Delrin?
-
@Gareth said:
Good to see you here too buddy.
Great knife to kick things off with.Hey, Gareth! Great to see you too!

@LoopCutter said:
I believe these fancy limited edition #8s are yet listed on the Web site, Opinel’s or was it SMKW😉. Not pushing just suggesting. 😆
Sold out in the US but made be not for you!
https://www.opinel-usa.com/collections/classic-folding-knives/products/2021-edition-iii-escapades-no-8-folding-knifeThanks for the link, I am gonna look around to see what other kind of Opinel I have been missing out on.
We are off to a great start

Just got back from the dog park and it's a lovely morning. Along the fence line at the dog park there are wild blackberries. You can graze on the them as you walk. Unfortunately most are on the other side of the fence out of reach. Well I decided it was worth it to climb over the fence and do some berry collecting. My Old Stag Lamb came in handy clearing some brambles out of the way. 👍
Cassie wasn't too happy about being left on the other side but quickly got over it when I started feeding her berries through the fence. 😁
[attach id=0 msg=2425254]
[attach id=1 msg=2425254]Old Stag Lamb and a PAL Blade Co. Jack
[attach id=2 msg=2425254]
Some Info on he PAL Company
**Pal Blade Company purchased the cutlery division on January 17, 1941 from Remington-Dupont which had been located at Bridgeport, Connecticut. Remington sold the cutlery department in order to utilize the existing Bridgeport plant space for the production of munitions ( I believe for the production of the Model 1903 rifle for the British government - GMC).
Pal leased a 100,000 square foot facility in Holyoke, Mass. located on the west side of Bigelow Street between Appleton and Cabot Streets. This building had been the A building of the Farr Alpaca Company. Interestingly enough, part of this building in the 1800s had been the home of the Henry Seymor Cutlery Company, makers of shears and scissors.
Removal of the machinery to Holyoke began on February 4, 1941 with the move scheduled to be completed within 30 days. By March 1st they planned to be in operation with two shifts employing 300 workers, many of them women. Plans were to have 450 employees within 3 months, and they were advertising that the company would be the largest cutlery manufacturing company in the United States. Full production was to begin in June, 1941.
At the time, Pal Blade also had factories in Plattsburg, New York, Montreal, Canada, Newfoundland and South America. Owners were brothers Abraham Mallman of Montreal and Joseph Mallman of New York.
The above information was taken from the February 3, 1941 Holyoke Transcript-Telegram
During World War 2, the plant was converted to make bayonets, sheath knives, and pocket knives for US forces. Following the war, the name was changed to the Pal and Personna Blade Co., Inc. Other company plants were located in Montreal, Canada, Plattsburg, New York, Barranquilla, Columbia and Buenos Aires, Argentina.
By December, 1945 the plant had been converted to peace time products and expanded their product line to include many items which had been unavailable during the war and for which there was a large market. Under the Pal name they produced pocket knives, paring knives, slicing knives and kitchen utility items in the moderate price range. The Personna items included gift sets, carving sets, carving knives and kitchen knives in the higher price brackets.
Employment in 1946 reached 950 workers on two shifts. 7:00 AM to 4:45 PM (3:45 PM for the women workers) and another shift from 3:00 PM to 11:00 PM. The plant worked 5 ½ days a week, closing at noon on Saturdays. At the time the plant operated on two floors of 90,000 square feet each. The first floor contained most of the assembly lines and production tables, while the basement was occupied by store rooms, a maintenance shop and one work room where paring knives were made. (Note – the building no longer exists - GMC)
The above information was taken from the December 4, 1946 Holyoke Transcript-Telegram**
Thanks for the story behind Pal, that knife has beautiful proportions.

-
@HarleyXJGuy said:
Peanut is definitely too small for this guy.That black synthetic looks great, is it the same stuff as the yellow Delrin?
Feels the same to me. :)
-
@RF52 said:
A very late entry but I'll participate with my case saddle horn if you all will allow it
Day 1
Good to see you!

@BPRoberts said:
Rough Ryder makes one, if Case/collectability isn't an issue. Best of the modern "budget" trad folder companies IMO.That is true. I always consider them a great place to start, good for trying out new patterns.

@nate j said:
It is certainly subjective, but assuming you’re referring to the 75 pattern, then I think the 47 pattern has it beat for EDC/general utility.The 47 is 3/8” shorter closed, but still long enough for most folks to get a full four-finger grip on.
If you compare the two side by side, you’ll note that the blades on the 75 are wider than the 47’s blades, but not really much longer.
Being narrower, shorter, lighter, and having rounded bolsters (vs. square bolsters on the 75), the 47 carries much smaller in pocket than the 75 but gives up very little in terms of cutting capability.
Definitely a subjective thing, I always think 75 have better lines than 47, but that just totally personal preference. But if there is a shrink down version of 75 in 47 size, I will definitely want to get one. :D
Dean like the GEC 68 Pony Jack and Barlows. A couple Tidioutes to start off with. Pony Jack and a TC Barlow.
Great start!

-
Morning everyone.

-
@MTSAK said:
Day 1
Batting lead off is my EDC Chestnut bone CV Peanut. It's been used for innumerable tasks, and I even used it to gut a whitetail buck I shot a few years ago! It is one of my most prized possessions given to me by my wife the first Christmas we were married. It will make many appearances here despite the many other Case knives I own.
Nice carry! Thanks to the background story, having a meaningful gift close by always reminds us those cherished moments.
@nate j said:
Day 1As I’m currently traveling and didn’t bring any other GEC knives, I’m likely stuck (for better or worse) with this Johnny on the Spot (way too long a name; I shall refer to it as JOTS for the duration of the challenge) for most of the challenge.
The good (so far):
- At 3 3/4” closed, I can just barely get four fingers on it, and it fills the hand nicely.
- I’m a sucker for these equal-end patterns; something about the symmetry appeals to me.
- F&F and W&T are as expected from GEC.
- While delrin isn’t my favorite handle material, GEC did a nice job with the texturing/jigging, and I have no concerns about the delrin standing up to pretty much whatever I can dish out.
- I’m excited to have some other tools in addition to a knife blade.
Concerns (at this point):
- This is a 1095 carbon steel knife. I will be spending significant time outdoors in the sticky July heat. Oiling it all the time just isn’t practical for me. I’m concerned that it may rust, but we shall see.
- I would really like to have more than one knife blade, though I’ve certainly survived challenges with only a single blade before. The point on the one knife blade also isn’t as acute as I would prefer. However, I’m hoping to be able use the claw-style can opener as a bit of a beater blade for things like opening packages, as an awl if the need arises, etc.
With regard to actual use today, the JOTS trimmed a couple of cigars. I’m also pleased to report that I got to test the bottle opener. It passed with flying colors, removing the cap in a single smooth motion.
Big fan for equal ends here too!
-
Day 2

Large stockman opens a new pack steel wool to help removing rust from cast iron pan.
-
@MichaelGT83 said:
Bermuda green bone. I can never seem to get a photo that does it justice!I’m certainly no professional photographer, but I would recommend trying some outdoor shots. In my limited experience, natural sunlight has a way of making colors “pop” that artificial light does not.
-
Day 2
Great start to the month of July’s Challenge
Two discussions seem to pop out on two subjected patterns, the Stockman and Sod Buster.
So I chose two fo my normally quiet Sundays.
[attach id=0 msg=2425464]
Resting in the sun while watering my plants lying on my glacier rock.

-
Following up for a comparison of the two sizes of CASE Sod Buster
[attach id=0 msg=2425465]
38 is top, regular and original Soddie.
37 bottom, Junior version of the Sod Buster.

-
I have only 3 different patterns of the CASE stockmans. A 75 model, a few 47 patterns and a single 18 model. Top to bottom on May for actual comparison with main clip blade exposed.
[attach id=0 msg=2425466]

-
Great start to the challenge. Good looking trads from everyone.
-
@LoopCutter said:
Following up for a comparison of the two sizes of CASE Sod Buster[attach id=0 msg=2425465]
38 is top, regular and original Soddie.
37 bottom, Junior version of the Sob Buster.
Dang I didn't realize the regular Sob Busters were that much bigger.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
