Show off your Sak mod's!
-
@Hzza said:
I really like how dense you can get with some of these mods, nice work dude
@DIAMOND said:
Nice functional build, and I like the black scales
It is interesting to see how many functions you can get in as small a package as possible I think I remember getting around 18 or so in two layer before :0)
Haven’t used black scales often but decided on a nice new set of plus scales for this build and really like them.
-
@zoidberg said:
You could get a pruner blade from a model where it kinks the other way like on the Pioneer Rancher.
Or use a vise and grips or a hammer and bend it over. I have done that before.
Only bend one way, bending it back can break it.Hammered it in the end, worked a treat - just waiting on some washers now as I didn't realise there should be a spacer in there as well ::)
Always learning :D -
I replaced the blade in this project with an Elmax and made a new spring specifically for the new blade, yes this spring is not fully machined yet, but I needed to test a couple frictions.




-
Also a prototype 84mm spring has been made, maybe someone has already made a similar one, but would anyone be interested in such a spring?

-
:o
When I mod, I add a simple lanyard.

Nice work on the spring!

-
[attach id=0 msg=2437425]
My latest build.
[attach id=1 msg=2437425]
84mm Sportsman now as a 3 layer with saw from my first vic
0,5mm brass liners and 2mm brass bolsters. Scales are localy sourced spalted apple wood.
It´s a pretty slim 3 layer :)

-
@BarbaBaba said:
[attach id=0 msg=2437425]
My latest build.
[attach id=1 msg=2437425]
84mm Sportsman now as a 3 layer with saw from my first vic
0,5mm brass liners and 2mm brass bolsters. Scales are localy sourced spalted apple wood.
It´s a pretty slim 3 layer :)Lovely work, as usual!
Sent from my SAK using Tapatalk
-
@decustomforge said:
Also a prototype 84mm spring has been made, maybe someone has already made a similar one, but would anyone be interested in such a spring?If that's an 84mm scissor spring then I'm certainly interested! And I know there will be more...
-
Sweet classy mod

-
@decustomforge said:
I replaced the blade in this project with an Elmax and made a new spring specifically for the new blade, yes this spring is not fully machined yet, but I needed to test a couple frictions.
That looks great! Good work!

-
@BarbaBaba said:
I have successfully made a scissor spring in G-10 as an experiment. Since it´s the only tool on that spring it works really well.Sounds really interesting! Do you have any photos (or plans
) you could share? -
@TomThumb said:
Sounds really interesting! Do you have any photos (or plans
) you could share?It´s snappy and solid, just like the original. I only did a quick test using parts from a Alox, but it showes that it could be done. It´s light and hard with just a minimum of flex. And since it´s only for the scissors that it is not a tool used with the same force like a blade. It cave me 100% confidence after really putting a lot of force on it, it will not break. To put a 91mm scissors in a 84mm frame this would be a perfect mod instead of cutting the steel and drilling new holes :)


-
@BarbaBaba said:
It´s snappy and solid, just like the original. I only did a quick test using parts from a Alox, but it showes that it could be done. It´s light and hard with just a minimum of flex. And since it´s only for the scissors that it is not a tool used with the same force like a blade. It cave me 100% confidence after really putting a lot of force on it, it will not break. To put a 91mm scissors in a 84mm frame this would be a perfect mod instead of cutting the steel and drilling new holes :)That is awesome. Are you making any more? :ahhh
-
@pa_strunk said:
Sweet classy mod

I agree,,, very classy!
-
@BarbaBaba said:
It´s snappy and solid, just like the original. I only did a quick test using parts from a Alox, but it showes that it could be done. It´s light and hard with just a minimum of flex. And since it´s only for the scissors that it is not a tool used with the same force like a blade. It cave me 100% confidence after really putting a lot of force on it, it will not break. To put a 91mm scissors in a 84mm frame this would be a perfect mod instead of cutting the steel and drilling new holes :)Amazing, thank you - will attempt it as soon as I find some 2.5mm G10! Thanks for the inspiration
-
I love that spring!

-
A group photo of the ones I made with home made micarta
[attach id=0 msg=2441149]
91mm Spartan with green micarta x-cut with shield. Lambsfoot mod on the pen blade
84mm Sportsman red jute micarta with shield
84mm Vintage Tourist with red canvas micarta
92mm Denim micarta from my old Nudie jeans. Pocket rivet as shield. Single spring with main blade and owl
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login