August Alox Addict Challenge 2023
-
@CM Yo said:
I finally completed a Challenge.Congratulations!

@SurgeUk said:
I present the O/G Px with my mates ankle biter "the Reg"
@PitCarver said:
My monochromatic collection suits me well, I guess, as it now matches my hair.
Closing thoughts
Alox is great
Alox is good
Must get more Alox
Oh, indeed I should.The more I carry the 84mm and 93mm Alox models, the more I appreciate the form factor. I rarely use the back tools, so I appreciate them not being so equipped. The Pioneer's loadout was shared among so many various camp/scout models because it just works. Anyone who wants a larger knife that "disappears in the pocket" is doing themselves a huge disservice if they don't check out the Alox Bantam. And the Farmer X contains awl of my high-value SAK tools in one sleek, sturdy package. I only wanted scale tools on one or two occasions (and had an Executive within easy reach). Taking that into totality, most of my future Victorinox purchases are gonna be Alox. I just wish the really spiffy ones weren't so smurfin' expensive.
Again, a thanks to Explorer for hosting, comis for the badge, and my fellow challengers for making this challenge absolutely amazing. Thanks awlso to the mod who awarded me the badge!

Day 31
I'm missing ribbed Alox, 74mm, and 130mm (possibly other sizes, too). But here is a selection of Alox in various sizes, textures, and colors.
[attach id=0 msg=2437913]
And I had plans to show my awl-time favorite Alox SAK, but didn't get to that until now.
[attach id=1 msg=2437913]
.jpg)
.jpg)
-
@NutSAK said:
Here are some tang measurements from my digital calipers:<u>Tool - Farmer / Trekker (in mm). Larger measurement highlighted in red</u>
Blade - 2.74 / 2.45
Can Opener - 2.25 / 2.17
Cap Lifter - 2.23 / 2.45
Saw - 1.75 / 2.44
Awl - 1.76 / 2.43Wider tang 93mm: blade, can opener
Wider tang 111mm: saw, cap lifterI'm not willing to give an advantage on the awl just based on tang width, because even though the tang on the 111mm tool is thicker, the L-shaped cross section of the 93mm awl is better at resisting torque than the flat cross-section awl on the 111mm, and the tang is supported better at the end of the 93mm frame than at the center of the layer of the 111mm. I also would not necessarily give an advantage to the 111mm saw, because a longer tool requires a thicker cross-section to be as "sturdy" as a shorter one, due to the increased leverage forces affecting that longer tool.
In my opinion, based on tang width, the cap lifter is the only tool that is meaningfully sturdier in the 111mm line, and the blade is the only tool that is meaningfully sturdier in the 93mm line. I also believe that the frame of the tools play a crucial role in the overall determination of which is "heavier/sturdier", and the 93mm line has a distinct advantage here and not just from a temperature/chemical standpoint, as you mentioned. The outer members of the 93mm frame (scales) are nearly 3 times thicker than the outer plates of the 111mm one. Granted, the 111mm line has larger diameter pins than the 93mm line to counteract this, but strength at the tang of a folding tool can only be as good as the structure supporting it.
In conclusion, I can only say that it is not clear to me that the 93mm is "not as tough as the 111mm", but it makes for good discussion.
Interesting discussion and comparison here. I never really did take these tools and measure it with the a calipers, but I do tend to use 111mm more when it is an outdoor setting. Mainly because the longer handle and tools of 111mm does allow better leverage and more efficiency during use, and the locked blade added an extra layer of safety during harder use.
Having said that, maybe 93mm is a happy medium between the 111mm and 91mm? After all, 93mm has its lineage associated with military contracts (the alox soldier knives) and I would imagine all those years of service would earn its place being a robust tool.
-
@Simon_Templar said:
Uh, I hate to point to this out, but the game you showed is for the Nintendo Wii, which is rather outdated and does not even support full HD (it's a great console though). If that is what you used to test your new TV, I imagine you might have ended up disappointed. ;)I wasn’t disappointed. If you only knew my previous TVs you would understand. It was more enjoying the size and color.
-
@powernoodle said:
That display jar is A+, sir. What a great way to see your toys on a daily basis.


-
-
@Farmer X said:
Congratulations!


Closing thoughts
Alox is great
Alox is good
Must get more Alox
Oh, indeed I should.The more I carry the 84mm and 93mm Alox models, the more I appreciate the form factor. I rarely use the back tools, so I appreciate them not being so equipped. The Pioneer's loadout was shared among so many various camp/scout models because it just works. Anyone who wants a larger knife that "disappears in the pocket" is doing themselves a huge disservice if they don't check out the Alox Bantam. And the Farmer X contains awl of my high-value SAK tools in one sleek, sturdy package. I only wanted scale tools on one or two occasions (and had an Executive within easy reach). Taking that into totality, most of my future Victorinox purchases are gonna be Alox. I just wish the really spiffy ones weren't so smurfin' expensive.
Again, a thanks to Explorer for hosting, comis for the badge, and my fellow challengers for making this challenge absolutely amazing. Thanks awlso to the mod who awarded me the badge!

Day 31
I'm missing ribbed Alox, 74mm, and 130mm (possibly other sizes, too). But here is a selection of Alox in various sizes, textures, and colors.
[attach id=0 msg=2437913]
And I had plans to show my awl-time favorite Alox SAK, but didn't get to that until now.
[attach id=1 msg=2437913]
Very nice 
-
@Farmer X said:
Congratulations!


Closing thoughts
Alox is great
Alox is good
Must get more Alox
Oh, indeed I should.The more I carry the 84mm and 93mm Alox models, the more I appreciate the form factor. I rarely use the back tools, so I appreciate them not being so equipped. The Pioneer's loadout was shared among so many various camp/scout models because it just works. Anyone who wants a larger knife that "disappears in the pocket" is doing themselves a huge disservice if they don't check out the Alox Bantam. And the Farmer X contains awl of my high-value SAK tools in one sleek, sturdy package. I only wanted scale tools on one or two occasions (and had an Executive within easy reach). Taking that into totality, most of my future Victorinox purchases are gonna be Alox. I just wish the really spiffy ones weren't so smurfin' expensive.
Again, a thanks to Explorer for hosting, comis for the badge, and my fellow challengers for making this challenge absolutely amazing. Thanks awlso to the mod who awarded me the badge!

Day 31
I'm missing ribbed Alox, 74mm, and 130mm (possibly other sizes, too). But here is a selection of Alox in various sizes, textures, and colors.
[attach id=0 msg=2437913]
And I had plans to show my awl-time favorite Alox SAK, but didn't get to that until now.
[attach id=1 msg=2437913]
Agree. I really love alox. I don’t usually miss the back tools and my wallet has two slots which I carry the scale tools in.
-
Bonus Day

Thank you to awl for the kind words it was an absolute pleasure to host this challenge with awl of you great people in this wonderful community.

Some unexpected work and family stuff that arose during this challenge lead to me being not as attentive and responsive as id like to have been but sometimes that’s how it goes.

Well there’s awlways next yearrrr!

Ok here we go…
Challenge Confessions: This challenge has really confirmed that I’m indeed addicted to alox and if my addiction has enabled anyone else then I’m genuinely sorry about this

but… at the same time >:D
>:D

**Continued **

Upon joining this forum my go to for many years was mainly cellidor models particularly the Explorer model. While I’m still a big fan of the Explorer the more I’m exposed to this forum Im finding myself being inexplicably drawn to silver (and other color) shiny things instead

Admittedly I’ve been looking at some alox 91mm scales on the bay destined for an Explorer but that’s for another day…
Most Carried Knife This Month: Harvester
Lessons Learned: This challenge has really showed me that I’m quite fond of the 93mm three layer options. Particularly the Harvester and Farmer and after 30 days the Harvester has taken the top spot by a nose. It’s that darn pruner blade it’s just so useful as an actual pruner for gardening but awlso it’s just plain bada$$. :ahhh
After diligently carrying these 3 layer models I’ve awlso learned that I’m in need of scissors quite often. So in steps the classic sd Alox as the wingman completing my perfect EDC (for the moment :ahhh)

** SAK Nerd Particulars: ** Adding the classic sd alox gives me more tools for less weight and a backup small blade as opposed to just carrying the Farmer X so the FX has been benched for the moment.

Thank you again to all who participated and helped make this challenge happen. It’s been great fun!
Take care and Happy Trails
I love SAK scissors, so I rarely purchase a SAK without them. I was excited when I got a special edition Rancher X with the pruner blade and scissors.
-
Superb Dan a little less hoppy and lighter than I was expecting, very refreshing

They’ve been brewing beer since 1698 and claim to be Britain’s oldest brewery so they definitely know a thing or two, it’s well worth seeking out any Shepherd Neame beers imo


-
A less hoppy beer is a win for me!

-

Great shot and use John

-
@Explorer said:
A rancher X seems like the ideal toolset for a one knife EDC situation. I’ve looked at a few for sale overseas
I was lucky enough to pick one up when Victorinox Freunde came out with their 7th anniversary one.
@PitCarver said:
I'm quite pleased with my Pioneer X. As my limited outdoor activities don't have me using a saw blade these days.The Rancher X doesn’t have a saw, it is a Pioneer X except a pruner blade in place of the can opener.

-
Ah ok I was thinking it had a saw but that would be a Harvester X whoops

It is very purdy

-
@PitCarver said:
I'm quite pleased with my Pioneer X. As my limited outdoor activities don't have me using a saw blade these days.Yes I’ve been waiting to pick one up- I’m hoping they’re going to come out with something similar to the winter magic alox series again so I’ve been holding out.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login