SAK-A-Like and/or off brand challenge for December?
-
You got it guys, I'll add it into my carry stating tomorrow
Sent from my SM-G996U using Tapatalk
-
Day 4
Today I decided to try out the can opener on the Vulpis. As may be seen in the pic, the can opener is designed to be used right-handed and worked clockwise around the can (or the can rotated counter-clockwise), like the Vic combo tool or Wenger claw-style can opener.
The Vulpis can opener also has a small flat screwdriver on the end. More on this in a future post.
I retrieved a can of olives from the pantry and set to work. Compared to the standard Vic can opener (my most used MT can opener), I was forced to take much smaller “bites” at the can, and progress was correspondingly slow. It also left a wickedly jagged edge on the can lid, though in my experience this is common with MT can openers.
Ultimately, while I believe the Vic can opener is more efficient, I was able to open a can with the Vulpis can opener, so it passes this test.

-
Day 3
SAK-Alike Challenge
Leatherman Free T2Touched up the edge this morning.

-
@nate j said:
Day 3The Vulpis scissors are quite similar in design and appearance to Vic scissors, which gave me high hopes for their performance.
I’ll spare you all any close up action shots, but I attempted to use the Vulpis scissors for some personal grooming tasks today.
They did a reasonable job trimming my fingernails.
However, when it came to trimming my mustache, I’m disappointed to report they were a total failure. They would leave the hair bent/kinked, but seemed unable to cut it. My suspicion is that this isn’t an issue of sharpness; rather, I believe the tolerances simply aren’t tight enough to reliably handle materials that are both thin and flexible.
The scissors have fallen significantly short of expectations, as the ability to trim an errant hair or thread are some of the most common tasks for EDC/MT scissors in my experience.
Good to know. I had seen this SAKalike and thought about getting another as a more compact alternative to a Pioneer X. Seems like it's not quite an adequate option
-
Day 5
Opened a package with the chisel. [attach id=0 msg=2452073]
They almost match! [attach id=1 msg=2452073]
Chisel was ok. I think I like the one on the Spirit better, but Vic hasn't put this on a knife platform yet.


-
<u>Day 4</u>
Package duty today for my SAK-A-Like. I suspect that it'll be doing this more and more until Christmas passes. Need to find more exiting things for it to do.

-
Day 5
Used the scissors and file to trim my nails. I've started staggering and doing one hand one week, and the other a week or two later so I always have nails. It's convenient. Overall performance was ok. Scissors were little unwieldy compared to Vic's and the file is clearly designed more as a tool file than a nail file, but definitely useable.

-
Day 4
SAK-Alike Challenge
Leatherman Free T2Not much happening today.

-
Ok, 4 days late and a dollar short:
DAY 1
Carried the Armbars (OG) today but didn't see any action. Rheumatologist appt and some shopping. Should have used the Armbar to cut my wife's sandwich for lunch but said she wanted a real knife (sorry Armbar).

Sent from my SM-G996U using Tapatalk
-
<u>Day 5</u>
My SAK-A-Like got some work in today. It helped me assemble my daughter's longboard. The awl pushed through the grip tape so the bolts could go in, and the wrench held on to the nuts while I screwed the bolts in. I wonder if it will also be able to help me cut the wrapping paper...

-
Day 5
I’m pleased to report that the bottle opener on the Vulpis performed its function well.
It seemed slightly persnickety about the angle of approach to the bottle cap being just right, but I feel like this is fairly common for MT bottle openers. Once the angle was correct, it removed the bottle cap in one smooth motion.
The bottle opener also has a slightly larger flathead screwdriver on the end, which will be addressed in a future post.

-
Day 2
Used the Armbar to help separate poorly perforated signs and cut tape without a dispenser to hang them for Ad break today. When life gives you lemons, use the Armbar because I've got lemons and they didn't help.

Sent from my SM-G996U using Tapatalk
-
Day 6
Wore this goofy Christmas suit to work today, and didn't carry the T4 due to tiny pockets. Thought it would be a no use day, but found a loose thread on the suit when I was putting it away. Scissors took care of it.

-
Day 5
SAK-Alike Challenge
Leatherman Free T2The T2 got used for some package opening,,,, and I used the flathead to do some light prying,,,, but never did get any action pictures.

-
Day 6
The Vulpis has two flat screwdrivers: a smaller one on the tip of the can opener and a slightly larger one on the tip of the bottle opener. Both are beveled.
The one on the tip of the Vulpis can opener is slightly larger than the screwdriver on the Vic can opener, and appears to be sized for #2 Philips screws.
I’m unsure what the sizing criteria were for the larger driver, but it is considerably smaller than the Vic large screwdriver.
While I feel this set of screwdrivers is less versatile than the standard Vic opener layer, they had no trouble turning any screws that they fit.



-
<u>Day 6</u>
Just some light duty snack opening today.

-
Noce pics so far.
-
Day 3
Work didn't give me anything to use the Armbar with today

Sent from my SM-G996U using Tapatalk
-
Day 7
This dollar store Christmas light headband was being a little flaky. Saw a screw on it and figure I'd see if I could spot a loose wire or anything fixable. I had my doubts but the awl-driver handled it fine. Gave it the ol' wriggle and everything seems fine now.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login