Leatherman Bond Owners Club
-
-
Gareth- good combo, pairing a BOND and a Classic!
I do like the Yellow, is a bold look for the little carry.
-
Cheers all.

-
I Finally installed a saw on my Bond. I have to be a bit careful when closing it up, the pliers want to land on top of the saw a bit, but if I close that side first it works smoothly. Iād like it to be less janky but this is the best I could come up with without drastically changing the rest of the toolset.

-
Very nice that you got it to go on the same side as the knife blade :o adds a whole other dimension to the tool now

-
@Poncho65 said:
Very nice that you got it to go on the same side as the knife blade :o adds a whole other dimension to the tool now

Thanks, it was nearly the last place I tried and just happened to work

Thereās actually just enough room for the saw to share that little ramp that the blade rests on to keep it from hitting the bottom of the handle well, so that was lucky.Now Iām thinking about swapping the the pliers out for ones on the Rebar

-
Got the pliers in!
I think Iāve finally got what I wanted; a more pocket friendly Rebar

-
Nice job! š
I am surprised you did not replace the file as well? I believe LM missed the boat on the BOND by not using the WAVE diamond file within the design.
I purchased a Surge blade pack (10$)and carry the diamond file in the pancake sheath to round out my tool needs in my day pack.
Also, surprised you have not added a pocket clip, that hole in the handle upsets my OCD that the tool is incomplete. šš
-
@LoopCutter said:
Nice job! šI am surprised you did not replace the file as well? I believe LM missed the boat on the BOND by not using the WAVE diamond file within the design.
I purchased a Surge blade pack (10$)and carry the diamond file in the pancake sheath to round out my tool needs in my day pack.
Also, surprised you have not added a pocket clip, that hole in the handle upsets my OCD that the tool is incomplete. šš
If I had a donor diamond file on hand Iād certainly add it! I like the one on the Wave, and probably use the diamond file more than the aggressive side. Iāll likely pick one up sooner or later.
Iāve thought about adding a pocket clip, but I also like how sleek the Bond is already and since I carry it loose in my back pocket I really donāt need it. Still, I might order one before summer since a clip might be better for shorts carry.
-
Besides the WAVE, I understand the PST II and Pulse models were fitted with the diamond style file.
I know my Pulse does, never owned a PSTII YET.
-
Great modding trichosirius!

Your picture reminded me I hadnāt posted a picture of my bond in this thread.
I wouldnāt say I have a love hate relationship with the bond. I just canāt seem to bond with the Bond. Early on, I thought that I could just change it to what I like. It first started off with swapping the blade for a serrated one from a Rebar. I am a clutz when I get in a hurry and slicing the web of my hand didnāt seem like a good idea. After that I filed the little nubs in the handle that would dig into my hand while operating the pliers. I tried swapping a charge bit driver in for the the #2 Philips bit. It works, but the pliers bind when closing. I used it like this for six months or so before I got fed up with it and threw it in the corner of my toolbox in the garage. A few months back I came upon a post in the Bond thread on BladeForums. In the post a member added the saw from a rebar and removed the lanyard ring on the clip side. So, I got out the wrenches and went to work. While I swapped back in the #2 Philips and saw, I also swapped the pliers from a Rebar. If I hadnāt already had the donor parts from a Rebar, I wouldnāt have gone to the effort to do this. I still prefer the PST to the Bond, even after the mods.
Quick note on the Rebar saw swap. The Rebar saw will sit proud of the handle when closed. I took a file and slowly took off material until it was flush with the handle. When it was to where I wanted it, I took some 220 grit sandpaper to smooth out the spline of the saw. After that was done, I disassembled and cleaned out the filings from the clip side and reassembled.
Sorry for the long winded post.
-
Quite excellent mod work by both of you

-
@JonesE said:
Great modding trichosirius!
Your picture reminded me I hadnāt posted a picture of my bond in this thread.
I wouldnāt say I have a love hate relationship with the bond. I just canāt seem to bond with the Bond. Early on, I thought that I could just change it to what I like. It first started off with swapping the blade for a serrated one from a Rebar. I am a clutz when I get in a hurry and slicing the web of my hand didnāt seem like a good idea. After that I filed the little nubs in the handle that would dig into my hand while operating the pliers. I tried swapping a charge bit driver in for the the #2 Philips bit. It works, but the pliers bind when closing. I used it like this for six months or so before I got fed up with it and threw it in the corner of my toolbox in the garage. A few months back I came upon a post in the Bond thread on BladeForums. In the post a member added the saw from a rebar and removed the lanyard ring on the clip side. So, I got out the wrenches and went to work. While I swapped back in the #2 Philips and saw, I also swapped the pliers from a Rebar. If I hadnāt already had the donor parts from a Rebar, I wouldnāt have gone to the effort to do this. I still prefer the PST to the Bond, even after the mods.
Quick note on the Rebar saw swap. The Rebar saw will sit proud of the handle when closed. I took a file and slowly took off material until it was flush with the handle. When it was to where I wanted it, I took some 220 grit sandpaper to smooth out the spline of the saw. After that was done, I disassembled and cleaned out the filings from the clip side and reassembled.
Sorry for the long winded post.
Looks awesome

I know what you mean about the file; while I really like the Bond, that thing can be a nuisance when using and opening and closing the tool. While I can avoid it, it can be a bit irritating since Iām so nitpicky with my tools.
I think I too would prefer the PST. I got the Bond precisely because I was in the market for a PST but couldnāt find a decent affordable one at the time, and the Bond was close enough.
To me the smaller the package the better, and the original just seems perfect the way it is. -
-
:So whatās the consensus on the Bond then, is it worth getting?
-
@Magic Bus said:
:So whatās the consensus on the Bond then, is it worth getting?Depends on your needs and previous MT likes and dislikes.
I am a ST300 and Rebar fan.I wanted a simple pocket carry and bought the Bond, and then later added a pocket clip. It is incomplete w/o the clip, the screw holes drove me mad.
But, the Bond caused me to look for something smaller and since it is pattern after the PST, I found one on eBay, and it was my home run tool! The first tool Tim L made is my go to, I now have multiple PSTs, some say obsessive š
-
Hi LC, thanks, I get what youāre saying. I am looking for something along the lines of a Bond but perhaps Iām better searching for a PST.
-
The Bond is a great tool
It depends on what you are wanting
it does have the Square shank Phillips that can be used with the Bit Adapter, which makes it much more useful
the plier head is also a bit better but form factor wise, the PST or PST II is hard to beat
the toolset of either isn't to bad either :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better š
Register Login
