ARC Owners Club
-
@Poncho65 said:
The ARC was bought second hand by myself for a very big discount :ahhh and that is why I have one :salute:Others may say different but I still say that the ARC is overpriced :whistle: :D
I think its okay to love Leatherman, and collect, hoard and use them, and still acknowledge that the ARC is overpriced. The people who care the most about Leatherman are the most affected by what is going on there. :tu:
There are prolly many reasons for the rocketing prices of Leatherman products, not the least of which is the soaring business and income taxes in Portland. This is not a political commentary. Just a benign fact that may partially explain Leatherman's MSRPs going up so much that a $99 ST300 seems like a bargain. There are surely other factors at play, especially with Tim Leatherman taking a backseat, and an apparent change in business strategy with the death of beloved favorites like the Juice and PS4 which don't have the fat, fat margins of a $229 ARC.
Report Details Soaring Business Tax Burden in Oregon, Portland - Oregon Business & Industry
In just a few short years, Oregon’s state business tax burden has increased nearly 45%, according to a newly released report.
Oregon Business & Industry (oregonbusinessindustry.com)
-
I totally get why :D I just don't like it
;)I do agree that I love LM in general
if anyone doesn't know that by now then they aren't paying attention 
-
@powernoodle said:
I think its okay to love Leatherman, and collect, hoard and use them, and still acknowledge that the ARC is overpriced. The people who care the most about Leatherman are the most affected by what is going on there.
There are prolly many reasons for the rocketing prices of Leatherman products, not the least of which is the soaring business and income taxes in Portland. This is not a political commentary. Just a benign fact that may partially explain Leatherman's MSRPs going up so much that a $99 ST300 seems like a bargain. There are surely other factors at play, especially with Tim Leatherman taking a backseat, and an apparent change in business strategy with the death of beloved favorites like the Juice and PS4 which don't have the fat, fat margins of a $229 ARC.
Report Details Soaring Business Tax Burden in Oregon, Portland - Oregon Business & Industry
In just a few short years, Oregon’s state business tax burden has increased nearly 45%, according to a newly released report.
Oregon Business & Industry (oregonbusinessindustry.com)
To be honest looking at the prices in the US vs UK, we were paying £100 ($130) for the original wave's back in 2000. That price has only increased to £105 at today's prices for the wave +. The arc as an example is £265 (delivered as we have to have age checks at extra cost), so close to $330.
I don't buy leatherman tools new anymore....but as they are hard to find, there is competition when they do turn up.
-
@Kevdynamite said:
Is anyone experiencing the pliers getting extraordinarily tight with use? I never had an issue on the p2s or p4 I own/have owned, but this is starting to drive me nuts. Realistically, I could swap right back to a p2 and not miss any of the extras on the arc, save for the blade. Not sure this warrants warranty repair or not, but seriously putting a bad taste in my mouth
I haven't used mine much, we got a nasty winter freeze thing going on and I've been hibernating and playing guitar.
Is it the cutters dragging?
-
I used the heck out of mine yesterday due to my daughter having a frozen pipe. Twisted and pulled on screws on her skirting, and the pliers are still quite smooth.
I'll admit, the only thing I've cut with the cutters are guitar strings.
-
6 F is too cold for 4 wheeler batteries. I'll let them float a bit...

-
@powernoodle said:
not the least of which is the soaring business and income taxes in Portland. This is not a political commentary. Just a benign fact that may partially explain Leatherman's MSRPs going up so much that a $99 ST300 seems like a bargain.This is spot on
plus, the huge increase in labor costs. The only thing Leatherman can do to drastically lower prices yet still remain profitable is to outsource production to China. -
I was exploring Leatherman's site yesterday and was really surprised by that. Then again, raw goods cost overall are up everywhere. Still, I agree Rich. I never thought I'd see an $80 bone stock Rebar.
-
@Murphy Slaw said:
I used the heck out of mine yesterday due to my daughter having a frozen pipe. Twisted and pulled on screws on her skirting, and the pliers are still quite smooth.I'll admit, the only thing I've cut with the cutters are guitar strings.
I was too lazy to run to workshop to get sidecutters, so I used mine to cut my strings too! Just can't get close enough to the posts to get a close cut, so I have about 1/2 of dangler on each

-
I've used a multi-tool for decades.
I always have "danglers".....
-
Hello everyone, just a question on arc issues and help from leatherman. Have you gone through warranty return on a brand new tool or a different route? My tool came scratched up dull blade, super wobbly handles and cutters that won't cut through 12g house wiring!! I started going through warranty repair but realized that return shipping was required. I don't feel its fair to pay shipping on a damaged brand new $230 premium tool! I have an email into leatherman and its been 3days no reply back. Anyone have similar issues?
-
@2018DRZ400SM said:
Hello everyone, just a question on arc issues and help from leatherman. Have you gone through warranty return on a brand new tool or a different route? My tool came scratched up dull blade, super wobbly handles and cutters that won't cut through 12g house wiring!! I started going through warranty repair but realized that return shipping was required. I don't feel its fair to pay shipping on a damaged brand new $230 premium tool! I have an email into leatherman and its been 3days no reply back. Anyone have similar issues?I was lucky, no issues with mine.
If you bought it from a physical bricks and mortar store, maybe you can return it to them for a refund or exchange. In the UK, your contract is with them and they have a responsibility to sell goods that are fit for purpose.
Annoying though it is, at least you know Leatherman will make it right with repair or replacement as many times as it takes over the next 25 - 40 years. That should dilute the pain of shipping costs a bit.
-
I hear you on the repair replaced for 40 years (I'm an insider too) but if it cost $10 -$15 to ship it and it takes 10 times hahaha you know! It was ordered directly from Leatherman. I included the order number in the email. Guess we will see what happens
-
I really want to like this tool. Its light and seems like it will have the tool set I use most. A blade changer would've made it the absolute perfect tool but it is what it is. I will swap out the cutter for some EOD cutters as I feel these pliers don't have the burleynes to cut heavy wire anyway. But all that is irrelevant if Leatherman doesn't make it right.
Like all of you on here I have many multi tools and carry them everyday. They work flawless and came sharp and the quality was amazing! This tool seems rushed through production and parts especially the now possible metal injection molded cutter blades are a big step back for Leatherman.
I have an older surge, st300, and mut that all have the the older cutter blades. Guessing they are the 154cm blades. The ARC blades show the marks where the mold was injected. Like cheap gun internal parts. There are no grind marks at all. I would be curious if all the tools with crappy cutters show the mold marks instead being a grinded piece steel.
I don't know how much Leatherman saves by doing this but damn please stop! Charge another 50 cents on the blades and give us back the good stuff!Ok I'm sorry I'm done venting hahaha continue on
-
@2018DRZ400SM said:
cutters that won't cut through 12g house wiring!!What are you talking about?
The issues with the cutters, that I have seen, is with coat hanger wire, which is pretty darned hard in the first place, and people are shoving the wire into the void.
Copper wire is totally different, and my Arc will eat copper like me eating smoked ribs.
-
The large gap at the bottom of the cutters they don't close. All my other Leatherman close where the cutters overlap each other. If I don't lift the wire up in the cutter it leaves a thin "slab" of metal that either needs to be wiggled side to side or cut again. Makes a simple job of dropping the wire in he cutter and squeezing like every single other multi tool or dedicated pliers with cutter I own. That's all I'm saying. That's why I wouldn't even try to cut a coat hanger (like all these people in YouTube) I believe that is a job for Klein linesman's pliers. The absolute only way a coat hanger would end up in my Leatherman cutters is if I was stranded on the side of the road and had to cut that coat hanger to get unstranded hahaha but in have a bunch of tools in my truck that are designed to due just that. So it would be a pretty special circumstance.
-
But yeah to bring up coat hanger I just thought of this. Couple years ago I was in a buddy car coming back from a gun show when his rear exhaust hanger broke and started banging on rear axle.....in comes Leatherman surge and coat hanger. And it ate through that coat hanger like it was copper wire easy and smoothly. But yes I hear you, if I lift the wire up into the cutter it goes right through. What my problem is ,is that none of my other Leatherman tools have to do that. None of them have that gap. But the cutter is only 1 of the problems I have with my ARC. If that was the only problem trust me I'd have no problem tossing those cutter in the scrap pile and grinding some EOD cutters to fit it. Those are still actually grinded steel. Not MIM parts. I just added some to my st300 a couple weeks ago.
Sorry for the long replies and don't mean to drag down this area of the forum, just sharing. Like I said I want to love the tool it has a lot of potential. For the price and how they hold it as the king of the multi tools hahaha it shouldn't have these issues.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

