Scale swap
-
Unfortunately I have to do another scale swap: after I put the blue transparent plus scales on my Cybertool, I had the knife in the same pocket as my Böker and it dit put a huge scratch to the SAK scales ;(
This time I did buy 2 pairs of new scales: the Swisschamp will get fresh blue transparent plus scales, as it had these originally and the Cybertool as my Daylee „Driver“ (because of the Bit Driver) will get blue Celidor Plus Scales..I wonder if they are a bit more stretch resistent than the transparent ones..
Is there a different between the Cellidor and the Transparent Scales?
The Cybertool will get an separat pocket in my pants so it can’t get scratched anymore..
These new scales are quite inexpensive , 2,50 € each pair..
Should arrive next week, I will post pictures..
-
Seems to me that the cellidor scratches easier than the transparent abs ones. Nothing to worry about anyway. You bought new ones very reasonably. Be sure to post a photo. We all like to look. Best wishes. Gary
;) -
I'm not sure how deep your scratches are but you can try sanding them out. I had some scales with some deeper scratches and I had to start out with 400 grit sand paper to get rid of most of them. It definitely helped but you can still see them a little bit depending on the light. Nothing that most people would notice but people like us probably would. :D
-
I could try to sand them, yes, but we’ll, new scales are 6,50 whit shipping for booth,
Also: I’m still feeling bad because I did steal the blue scales for the Cybertool from the Swisschamp, which might be a big Sakrileg in the SAK World as the Swisschamp is the Holy Grail of SAK Collectors..It’s nice that you can change them that easy, I was on search for an blue SAK back then but did not found one whit just a few layers which would fit my tool needs, so I ended up whit the champ..
When I had known back then I can take any Swiss army knives and put blue scales on, might be I had now something different, or had not needed a second knive as the Cybertool l is quite cool for tools but much to big for blade..
I have it now in an different pocket, there are only my phone, zippo in an case, some paper nose tissues and my ffp2 mask I have still in edc, so no danger for the new cellidor scales..
-
It looks like this,
As in Germany I think the post doesn’t deliver, I will post the scales on Tuesday..

-
I have polished out much worse than that. I am too cheap to buy new ones, I suppose. The ABS polishes out pretty well. I have taken off printed logos and sanded off all sorts of scuffs. I generally used 600 grit carbide paper and followed it with whatever polishing compound I had on hand. AzteCypher is an expert at it.
This is a set of blue cellidors that friend Aztec sent me. They are like a mirror. They were scuffed up at one time and had a logo on one side.
I am 100% behind your decision to buy new ones. For the others reading this thread who might not know. You can polish the scratches out easily. Best wishes. G
:D
[attach id=0 msg=2464047]
-
You're too kind Gary. I'm going to try and clean up some other scales soon so I'll show a before and after pic of them and what I used.
-
Do I have to prepare the scales somehow? The Celidor gets only whit a lot force over the washers..
Would a bit heat work? -
I put the cellidor scales in hot water for a minute or so before I press them into place with C-clamps. If you use a vise or C-clamps you must pad the scales with thick cardboard or something to prevent marking. Don't use boiling water. That is too hot. Just about as hot as coffee out of the pot maybe. Try to put the pressure over the pin locations. You can crack them if you press over the wrong spots. Best wishes. G
;) -
I agree. 👆
-
Done, was actually quite hard work : maybe they where still too cold as they where laying in our post box outside..
I did made sure the pins where clean, put them on, took some paper towel and first did press them together by hand, i think the cellidor where much more stiff than the abs scales..
I did watch a video where someone did press them finally together by standing on the SAK (secure packaged in papertowell), this did the trick for me..



-
Looks good! I ended up using a vice with a rag protecting the scales so as not to damage them. Then I slowly squeezed them together till I could either hear them press in, or I'd remove it from the vice to check.
-
The blue cellidor of my day lie driver Cybertool looks a bit like there are lots of finger marks on it.. maybe I have to polish it a bit.. or it’s the light..
I will take a better picture of it when I got better light
-
If you decided to stand on the SAK to press on the scales, there is a big chance that you might bend a liner. That is definitely something you don't want. A vise, or clamps are a lot safer. Best wishes. G
:) -
Well I think it had survived it, I took a better picture of my daily (bit) driver

-
Looks good to me. Our friend MacGyver uses auto headlight polish to take care of tiny surface scratches. I used to have some Flitz, but used it all up. Since you carry your SAKs, it is inevitable that they will pick up tiny scratches. A few minutes now and then with some polish will keep them looking factory new. It seems that cellidor just picks up scratches and fingerprints and dirt so easily. Best wishes. Gary

-
My huntsman will get the same scales, but it should be much more easy to put them on as the knife is much thinner..
also it will get color fitting tweezers and thoothpick and these korkscrew tools where I still have to decide which one I will use..Might also be there where too cold back then , I had some issue..
-
You do know that if you take the scales off several times, that eventually they will be loose? First time generally works okay. After that they start getting a rattle when you touch them. Eventually you will have to glue them if you want them tight. I generally leave them where they are, unless they are broken. Just scratches means I polish.
It seems like you tired of your Swiza pretty quickly. Imagine what the white scales would look like after carrying them a while. I think I would still buy one if I found a used one somewhere. Best wishes. Gary

-
I did order a new pair of the same color, I don’t want to use them from the Cybertool.. and the used blue ones are only there until I get the new scales next week..
Whit the Swizza, yes maybe I would have to get use to its flaws, but it’s also a good collection item..
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login