Fishing knife mod
-
I'll be watching.
For sure. -
I am impatiently waiting for the materials to show up in the mail. So here are a few inspiration shots that I have found. None are saks, but I think I want a bail, and perhaps two little lines. [attach id=0 msg=2464217] [attach id=1 msg=2464217] [attach id=2 msg=2464217]

-compressed.jpg)
-compressed.jpg)
-
One of the many perks of working at home - Some SAK modding during lunch break.
Popping scales, I guess I still was not careful enough and have tiny shavings from 5/6 holes.
[attach id=0 msg=2464642]Drilling one went better than ever. Will be doing the next after work.
[attach id=1 msg=2464642]

-
@Enginears said:
One of the many perks of working at home - Some SAK modding during lunch break.
Popping scales, I guess I still was not careful enough and have tiny shavings from 5/6 holes.
[attach id=0 msg=2464642]Drilling one went better than ever. Will be doing the next after work.
[attach id=1 msg=2464642]Nice! I haven't found a way to avoid the shavings, the hot water trick seems to help a little, but I still always get those tiny shavings.
-
@lazar said:
Nice! I haven't found a way to avoid the shavings, the hot water trick seems to help a little, but I still always get those tiny shavings.Yeah this was with the hot water so I guess it's unavoidable to some degree.
After disassembly this is what I had laid out. [attach id=0 msg=2464693]
I decided to build this one from the pliers out.
[attach id=1 msg=2464693]And here is the first rough assembly.
[attach id=2 msg=2464693]After that I did some additional grinding on my “combo tool - flat head” to get it to lay a little lower.



-
Next step was to peen the 4th pin.
[attach id=0 msg=2464694]
And then do the first dry fit of the scales.
[attach id=1 msg=2464694]
The scales were way to thick so I sanded them down closer to a standard scale and then glued them to the outer liners. I am not sure if this is really needed but I have seen it done and figured it would make the overall package tighter and prevent water from getting behind the wood. [attach id=2 msg=2464694]As the glue dried I did some experimenting with wax, flames and pondered what treatment I would give the actual scales. [attach id=3 msg=2464694]




-
@Enginears said:
Next step was to peen the 4th pin.
[attach id=0 msg=2464694]
And then do the first dry fit of the scales.
[attach id=1 msg=2464694]
The scales were way to thick so I sanded them down closer to a standard scale and then glued them to the outer liners. I am not sure if this is really needed but I have seen it done and figured it would make the overall package tighter and prevent water from getting behind the wood. [attach id=2 msg=2464694]As the glue dried I did some experimenting with wax, flames and pondered what treatment I would give the actual scales. [attach id=3 msg=2464694]
Looking good!

-
So nothing is ever perfect. I tried to make a brass bail and went through 4 before admitting it was not going to work with what I had. I decided to go with steel after all. [attach id=0 msg=2464822]
So I made the bail, peened everything and then sanded down the outside one last time with 180, 200, and 1000 grit paper. The tools all have a great snap, and no play. This is the first 91mm knife I have done where the scales are peened onto the liners, I will definitely be interested to do more.
Here it is after a touch of wax and oil.
[attach id=1 msg=2464822] [attach id=2 msg=2464822]


-
[attach id=0 msg=2464823] [attach id=1 msg=2464823]
Truth be told I am a pretty crappy fisherman, and mostly end up goofing around on kayaks and boats. But this is the intended use, clip it to your vest or PFD and have the pliers or hook tool deployed and at hand.
[attach id=2 msg=2464823]


-
Very impressive! I love it!!!

-
That has a very nice old timey look. I respect everyone working with wood and hand tools. Like the bail especially. Very nice indeed!
-
I like that. I may need to try my hand at that setup since we do like to fish. What issues were you running into with the brass bail that you couldn't overcome?
-
Hey thanks for the kind words guys.
I think the issue was mostly the small diameter. When I would flatten it, cracks were happening. A few times I got it flat and solid and then small pieces were cracking off during/after drilling. I tell you what though, the mock up looked sweet, I will be sourcing some bigger brass stock.
-
Kudos to you, Enginears, on such a wonderful job! Your craftsmanship is exceptional (and to think it was down with hand tools!) and makes it look like an heirloom. Thank you for sharing the process and not just the final product. BTW, did you tried heating up ("annealing") the wire before flattening or drilling?
-
@Juan el Boricua said:
Kudos to you, Enginears, on such a wonderful job! Your craftsmanship is exceptional (and to think it was down with hand tools!) and makes it look like an heirloom. Thank you for sharing the process and not just the final product. BTW, did you tried heating up ("annealing") the wire before flattening or drilling?Hey Juan thank you for the kindness. You know in retrospect I should have tried annealing before giving up…. I have a Barlow styled mod in the works and may try the brass bail again. Thanks for the idea.
-
Beautiful.
Outstanding job. -
@Enginears said:
[attach id=0 msg=2464823] [attach id=1 msg=2464823]Truth be told I am a pretty crappy fisherman, and mostly end up goofing around on kayaks and boats. But this is the intended use, clip it to your vest or PFD and have the pliers or hook tool deployed and at hand.
[attach id=2 msg=2464823]That turned out sweet!

-
Thanks Adam. It has ended up being a very useful SAK around the house as well as its intended purpose.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login