The Hacked Leatherman Owners Club.
-
@Craig_S said:
Anyone have a bit exchanger and/or a t shank holder in a Super Tool 300? I'm really thinking about trying the bit exchanger. Doubt the t shank mod would work but I wish it could.As good of a tool as the Surge is, I'm just old school.
Thanks,
CraigHi Craig, Yes I swapped in the flat bit adapter into the ST300. Make sure to get one from a Surge. As for the t-shank adapter, you will need one from an ST300EOD. You can get one from a Surge, but that one will require you to fabricate a bushing and will require some grinding. I don’t have access to a lathe, so I went the EOD route with my ST300M.
Bit adapter in my color swap ST300.
T-shank adapter from an EOD in a ST300M
-
Thanks JonesE, was just about to post the link

-
Hello Modders,
Does anyone know of any professional leatherman modders (doing it for a living or something) that can help me in removing or replacing
the blades of a wave? I'm dead set on the Wave+, black finish so not really interested in knifeless rebar or
other models. I'm looking for someone (preferably in Europe) who can replicate most of the modifications of this one https://www.reddit.com/r/Leatherman/comments/106t9w8/modified_wave_for_wave_week/, except the bit holder one. I want it done properly so would like to avoid doing it myself. :-)
Thank you.all the best
-
All i can say its not gonna be cheap to get all those mods just for scalpel and comb cost around 80€ plus postages and scalpels. Modding itself isnt hard but getting parts for mod is expensive.
Only Tools Matters
-
@Antti Lammi said:
All i can say its not gonna be cheap to get all those mods just for scalpel and comb cost around 80€ plus postages and scalpels. Modding itself isnt hard but getting parts for mod is expensive.Only Tools Matters
yeah, you're right. It's going to be expensive. But willing to pay the price for this one so long as I get to have a wave that I can bring with me in public (of course, not nightclubs, bars , concert places, etc)
-
The 1/4 inch bit driver cost me another 40$… Maybe not worth the mod? It drive pretty similar

-
Hopefully you can find someone close to help you out

The mod looks pretty straight forward and vet doable but ad Antti said, its gonna be expensive :ahhh
-
Has anyone seen this?

-
I have not seen that particular variation :o looks handy

-
@FinneganMckinney4000 said:
Has anyone seen this?Looks tough!
-
@JonesE said:
Hi Craig, Yes I swapped in the flat bit adapter into the ST300. Make sure to get one from a Surge. As for the t-shank adapter, you will need one from an ST300EOD. You can get one from a Surge, but that one will require you to fabricate a bushing and will require some grinding. I don’t have access to a lathe, so I went the EOD route with my ST300M.Bit adapter in my color swap ST300.
T-shank adapter from an EOD in a ST300M
Thank you. You know, I can't believe it but somehow I must have had my head in the fog the day I posted this. I helped my son build his first LM, a ST300EOD. We combined it with a ST300M and made a really efficient toolset. It has the handles and t shank of the EOD, the pliers and bit exchanger from the M, and could even be improved a little more now that I think about it.
I'm not sure if I should buy the parts and mod my ST, or start with an EOD and M like we did with him. Decisions, decisions............

Craig
-
Good luck in the mod, Craig
whatever way you decide let us know and take pics

-
with Poncho. Please share your experience and pictures. We love story time with pictures.JonesE
-
Here are my son's ST300s. The 300EOD is his EDC when he's carrying a LM, and the 300M is pretty much what's left over from the build. He is pretty happy with the EOD and I am going to start with one if at all possible, but I will most likely include the file and prybar in mine. I'll definitely keep everyone up to date with pics of my own creation once I start.

Craig

-
Sorry for the question, but why did you not switch the partly serrated with the straight edge blade? since the hacked EOD has a fully serrated one on it...
-
This is my first post, so be gentle.
I'm looking for a black oxide, button-head, Torx security bolt for the tool side of my Signal. (Circled in red in the attached pic.) I can't find the specs and had no luck bringing the barrel nut to box stores to test fitment. Any idea how to get just the bolt? Hoping not to pay $25+ on eBay for a full pivot set with plier-side bolts, nuts, washers, and spacer.
Thanks.

-
@Gotter said:
This is my first post, so be gentle.I'm looking for a black oxide, button-head, Torx security bolt for the tool side of my Signal. (Circled in red in the attached pic.) I can't find the specs and had no luck bringing the barrel nut to box stores to test fitment. Any idea how to get just the bolt? Hoping not to pay $25+ on eBay for a full pivot set with plier-side bolts, nuts, washers, and spacer.
Thanks.
Welcome Gotter, I checked my parts bin. Sorry no spare. Looks like you got a nice project going. Don’t forget to post pics and the story behind your mod.
-
@FinneganMckinney4000 said:
Sorry for the question, but why did you not switch the partly serrated with the straight edge blade? since the hacked EOD has a fully serrated one on it...The EODs come with a partially serrated blade and the Ms come with a straight one. He doesn't like combo blades so we switched them giving his every day carry 300 a straight blade. I'll most likely do the same thing, and if I have room I'll also install a fully serrated blade from a standard ST300.
Craig
-
Hacked? More like mutilated. This is what remains of a Micra when the scissors break. No knife blade either, but all drivers, tweezers, nail file... It is really handy to have a small Phillips with 90° angle, for those impossible to reach places, like this stupid bedside lamp.
My equally tormented SAK hack job also featured.


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

