The Hacked Leatherman Owners Club.
-
I have not seen that particular variation :o looks handy

-
@FinneganMckinney4000 said:
Has anyone seen this?Looks tough!
-
@JonesE said:
Hi Craig, Yes I swapped in the flat bit adapter into the ST300. Make sure to get one from a Surge. As for the t-shank adapter, you will need one from an ST300EOD. You can get one from a Surge, but that one will require you to fabricate a bushing and will require some grinding. I don’t have access to a lathe, so I went the EOD route with my ST300M.Bit adapter in my color swap ST300.
T-shank adapter from an EOD in a ST300M
Thank you. You know, I can't believe it but somehow I must have had my head in the fog the day I posted this. I helped my son build his first LM, a ST300EOD. We combined it with a ST300M and made a really efficient toolset. It has the handles and t shank of the EOD, the pliers and bit exchanger from the M, and could even be improved a little more now that I think about it.
I'm not sure if I should buy the parts and mod my ST, or start with an EOD and M like we did with him. Decisions, decisions............

Craig
-
Good luck in the mod, Craig
whatever way you decide let us know and take pics

-
with Poncho. Please share your experience and pictures. We love story time with pictures.JonesE
-
Here are my son's ST300s. The 300EOD is his EDC when he's carrying a LM, and the 300M is pretty much what's left over from the build. He is pretty happy with the EOD and I am going to start with one if at all possible, but I will most likely include the file and prybar in mine. I'll definitely keep everyone up to date with pics of my own creation once I start.

Craig

-
Sorry for the question, but why did you not switch the partly serrated with the straight edge blade? since the hacked EOD has a fully serrated one on it...
-
This is my first post, so be gentle.
I'm looking for a black oxide, button-head, Torx security bolt for the tool side of my Signal. (Circled in red in the attached pic.) I can't find the specs and had no luck bringing the barrel nut to box stores to test fitment. Any idea how to get just the bolt? Hoping not to pay $25+ on eBay for a full pivot set with plier-side bolts, nuts, washers, and spacer.
Thanks.

-
@Gotter said:
This is my first post, so be gentle.I'm looking for a black oxide, button-head, Torx security bolt for the tool side of my Signal. (Circled in red in the attached pic.) I can't find the specs and had no luck bringing the barrel nut to box stores to test fitment. Any idea how to get just the bolt? Hoping not to pay $25+ on eBay for a full pivot set with plier-side bolts, nuts, washers, and spacer.
Thanks.
Welcome Gotter, I checked my parts bin. Sorry no spare. Looks like you got a nice project going. Don’t forget to post pics and the story behind your mod.
-
@FinneganMckinney4000 said:
Sorry for the question, but why did you not switch the partly serrated with the straight edge blade? since the hacked EOD has a fully serrated one on it...The EODs come with a partially serrated blade and the Ms come with a straight one. He doesn't like combo blades so we switched them giving his every day carry 300 a straight blade. I'll most likely do the same thing, and if I have room I'll also install a fully serrated blade from a standard ST300.
Craig
-
Hacked? More like mutilated. This is what remains of a Micra when the scissors break. No knife blade either, but all drivers, tweezers, nail file... It is really handy to have a small Phillips with 90° angle, for those impossible to reach places, like this stupid bedside lamp.
My equally tormented SAK hack job also featured.


-
Nice example of mini-multi power,
how did your scissors break? :ahhh -
@FinneganMckinney4000 said:
Nice example of mini-multi power,
how did your scissors break? :ahhhI had the Micra in my keys for years. Little by little, the rivet holding the scissors together just wiggled loose, until they wouldn't cut very thin materials, which is bad for a tiny tool. It may have been a dud, not very tight from the getgo. My second Micra didn't have this issue.
-
@Gotter said:
This is my first post, so be gentle.I'm looking for a black oxide, button-head, Torx security bolt for the tool side of my Signal. (Circled in red in the attached pic.) I can't find the specs and had no luck bringing the barrel nut to box stores to test fitment. Any idea how to get just the bolt? Hoping not to pay $25+ on eBay for a full pivot set with plier-side bolts, nuts, washers, and spacer.
Thanks.
Welcome to
I hope you can find that part for a good price
I have never modded on a Signal so I know I dont have that part 
Unfortunately, modding can get expensive sometimes though and that is just the nature of it but I do hope that it doesn't cost you to much

@JonesE said:
Don’t forget to post pics and the story behind your mod.

-
@Blunt Object said:
Hacked? More like mutilated. This is what remains of a Micra when the scissors break. No knife blade either, but all drivers, tweezers, nail file... It is really handy to have a small Phillips with 90° angle, for those impossible to reach places, like this stupid bedside lamp.My equally tormented SAK hack job also featured.
Two great mods, BO
the Micra in any form is a handy tool for sure
and I do love me some modded Alox

-
Thinking ahead....... I don't want to use my Crunch's blade at work and wear it out (let's pretend I'm not crazy enough to have an extra or two NIB Crunch's
). Is there another blade that's a drop in replacement? Doesn't have to be serrated.Short of a drop in, what tools interchange with the Crunch's locking system?
Thanks,
Craig -
I am thinking the tools of the Pulse should be a straight drop in
but tools of the PST/PST II and their kin should also work without much trouble
if nothing else, you might have to grind to modify or not but those would probably be the closest
tools from the Zytel series like the Blast/Fuse and Kick would also work with some modifying probably which in turn would leave many of the newer tools to work in it as well
meaning the Rebar, Bond and internals of the Wave/Charge/Curl (not the outside opening tools of those though) I have had a Crunch apart but never swapped any tools out but we have had members mod them 
The only problem is that you have to have shorter tools in the handle or at least modify them to make them shorter to work because of the locking plier head

-
Is Serakote worth it?

If so, how do I receive/apply/finish it? Or do I just have somebody else apply it? so many questions...
-
@Poncho65 said:
I am thinking the tools of the Pulse should be a straight drop in
but tools of the PST/PST II and their kin should also work without much trouble
if nothing else, you might have to grind to modify or not but those would probably be the closest
tools from the Zytel series like the Blast/Fuse and Kick would also work with some modifying probably which in turn would leave many of the newer tools to work in it as well
meaning the Rebar, Bond and internals of the Wave/Charge/Curl (not the outside opening tools of those though) I have had a Crunch apart but never swapped any tools out but we have had members mod them 
The only problem is that you have to have shorter tools in the handle or at least modify them to make them shorter to work because of the locking plier head

Thanks Poncho. I'll check out evilbay and see if I can pick up a couple implements to try out.
Craig
-
Sometimes it is cheaper to just buy a while tool and take it apart rather than buying individual parts

@FinneganMckinney4000 said:
Is Serakote worth it?
If so, how do I receive/apply/finish it? Or do I just have somebody else apply it? so many questions...
I think it would be worth it but have no idea about applying it or anyone that does it (Google search would probably find someone probably
)If you do it or find someone who does, please put your experience
and pics please
:D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

