Gerber Mp600 owners club ;)
-
I have to say, t miss carrying mine with being in the Driver Challenge. That bit driver is great, but the 609 feels like an old friend.
-
That has been my experience, although the earlier ones felt stronger/tougher.
-
Funny you mention the Challenge; just bought a 2017 Center Drive!

-
Good to hear! That's about the vintage of mine. It's a tough, very usable tool. Mine has seen a ton of uses and keeps on coming back for more.
-
I went on a hunt, and found my prey/prize: an OE Multi Lock Scout! After some TLC, I got it looking good (except for some oxidation on file
).
Simonds diamond sided file-
Awl-
No-nail nick/pull Phillips-
Nail nick on blade and file-
Fiskars branded scissors-
[attach id=0 msg=2465545] [attach id=1 msg=2465545]

-
And here are the OE and, what I believe to be a "clone":
[attach id=0 msg=2465547] [attach id=1 msg=2465547]Both are quite nice, and functional.
(But I'm thinking about converting the clone into a "Sportsman"; whatcha all think!?).


-
They're gorgeous and I say go for it! -
Thank you Barry!

-
@Juan el Boricua said:
Happy Holidays to everyone!Here to share my newest: an-almost -all-original, hardly-used (I'd say the combo blade and nothing else much) blunt nosed Pro Scout down to the OE Remgrit blade; almost, because of my own stupidity I snapped the spring holder in two trying to "make it perfect" after resharpening and straightening the blade, cleaning and oiling the tool.
But, being desperate and compulsive, decided to cobble up a replacement out of an old and unused stainless water bottle. Shown are the results and, as tested, performs quite well until I can get an OE one. [attach id=0 msg=2455221] [attach id=1 msg=2455221] [attach id=2 msg=2455221]
what you all think?
I have one similar (needle nose) I don't like the original knife blade, it feels so thin and flimsy. What are my options?
New to the forum here btw, hi!Sent from my SM-S908U using Tapatalk
-
Mine, a hand-me-down. Love it though.
Sent from my SM-S908U using Tapatalk
-
Welcome aboard BigShep! I'm not the guy to talk to about modding out an MP but they'll be here soon. It's great to have you here and nice MP!
-
Welcome BigShep and, let me say that's one nice "hand-me-down" you've there! As for the blade, it might look flimsy but, it is quite good and sturdy for a multi tool knife; perhaps give it a chance?
If after all you'd like to still replace it, your "plug in" options are: newer/later MP blade (Wharncliffe style; thicker, and same choices between combi blade and plain edge ones. Although they're supposed to be the same alloy, does not have the same edge retention as yours), an earlier Multi Lock or same vintage plain edge or fully serrated blade; a Diesel blade might work, as it looks to be the same as in the discontinuedDETSight Tool(ST) model or in the Snap On version. Another option is to go bladeless, as I did a clone of a Bladeless model by replacing the combo blade with asmalllarge flat driver (and the replaceable cutters head; here it is /post/2456899). After this, I think your options are custom ones. Good luck and again, welcome!
-
@Juan el Boricua said:
Welcome BigShep and, let me say that's one nice "hand-me-down" you've there! As for the blade, it might look flimsy but, it is quite good and sturdy for a multi tool knife; perhaps give it a chance?
If after all you'd like to still replace it, your "plug in" options are: newer/later MP blade (Wharncliffe style; thicker, and same choices between combi blade and plain edge ones. Although they're supposed to be the same alloy, does not have the same edge retention as yours), an earlier Multi Lock or same vintage plain edge or fully serrated blade; a Diesel blade might work, as it looks to be the same as in the discontinued DET model or in the Snap On version. Another option is to go bladeless, as I did a clone of a Bladeless model by replacing the combo blade with asmalllarge flat driver (and the replaceable cutters head; here it is /post/2456899). After this, I think your options are custom ones. Good luck and again, welcome!
Thanks for the info! I will look into the options you mention. I will likely leave it as it is as I usually carry another blade anyway and this one doesn't hurt to leave in it's original home.
The person who gave me this one was tired of the "flimsy" case (velcro was old). So he didn't carry it anymore. I was happy to adopt it.
Sent from my SM-S908U using Tapatalk
-

ML600 work EDC. I previously carried a BN gen 2 or 3 original tool and i’ve toyed around with switching this head to a BN as i prefer it and this is usually backed up with a MP400 in the waist pack
Sent from my iPhone using Tapatalk
-

My only 600’s. A BN pro scout is being considered though to round out the scissor 600’sSent from my iPhone using Tapatalk
-
Not a bad couple to have though!

-
I'm a little afraid to leave thoughtless comments, because... The administrator decided to award me the title of spam for one post, but your couple is not bad! :)
-
@madfishcat said:
I'm a little afraid to leave thoughtless comments, because... The administrator decided to award me the title of spam for one post, but your couple is not bad! :)The spam box is default until you specify the country you're from in your profile. You can go to your profile page and select the country and then it will show a flag instead of the spam box.
Welcome to the forum

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login