Show off your Sak mod's!
-
My first try at this, it's nothing spectacular but at least it turned out ok.
I want my SAK in Alox, as sleek as possible, with only the tools I need. I haven't used the openers in years. There are better drivers in every EDC tool that I carry, I also have a pry bar that can take my body weight, we have virtually outphased bottle caps, and tins come with opening tabs. So off with that whole layer. Knife, awl, scissors, saw - they all perform a task that the other tools don't. Nothing is redundant. It's remarkably light, and as a three layer item with saw, it is a whole millimetre thinner than the Pioneer X (which also has a near perfect tool set).
So it's a Farmer X without openers. What should I call it? Something agricultural. I'm thinking maybe the Peasant X. Or Serf X? Kulak X? Settler X? Homesteader X?
For my next attempt, I'm gonna need a set of quality bits for drilling into metal. As you might guess, I made a mess of the scale with the Vic Cross. I may sacrifice a Solo to fix it. I may also play around with the layers, maybe turn the saw around, there seems to be more clearance on the other side.

-
The whole business was very simple, it just took a month because I ordered the parts from the UK, and the EU likes to punish the UK for leaving the club. With shipping, customs and taxes I could have just bought another Farmer, but where's the fun in that! So if you can point me to a dealer inside the EU, I may do more hack jobs like this.
At least you can tell it's slimmer than Pioneer X.

-
@Blunt Object said:
My first try at this, it's nothing spectacular but at least it turned out ok.I want my SAK in Alox, as sleek as possible, with only the tools I need. I haven't used the openers in years. There are better drivers in every EDC tool that I carry, I also have a pry bar that can take my body weight, we have virtually outphased bottle caps, and tins come with opening tabs. So off with that whole layer. Knife, awl, scissors, saw - they all perform a task that the other tools don't. Nothing is redundant. It's remarkably light, and as a three layer item with saw, it is a whole millimetre thinner than the Pioneer X (which also has a near perfect tool set).
So it's a Farmer X without openers. What should I call it? Something agricultural. I'm thinking maybe the Peasant X. Or Serf X? Kulak X? Settler X? Homesteader X?
For my next attempt, I'm gonna need a set of quality bits for drilling into metal. As you might guess, I made a mess of the scale with the Vic Cross. I may sacrifice a Solo to fix it. I may also play around with the layers, maybe turn the saw around, there seems to be more clearance on the other side.
Nice! I like it, maybe call it the Rancher X
-
Very nice!
JR -
Nice combination of tools and size. Now you should get another set of scales and re-assemble the openers into a nice single layer bladeless SAK.
Sent from my iPhone using Tapatalk
-
Nice mod BluntO.
-
Thanks awl!
-
Decided to do another Wenger mod yesterday. Wanted to incorporate their brushed stainless steel scales with clip point blades. Heavy little compact SAK,.



-
Very nice! Did you do anything to refresh the scales or are they original?
-
They were original and royal pain in the butt to remove. Plan on warping some outer liners if you try it. Externally in fantastic shape so I did not have to do much else.
-
@pa_strunk said:
Decided to do another Wenger mod yesterday. Wanted to incorporate their brushed stainless steel scales with clip point blades. Heavy little compact SAK,.Nice! Really like those clip point blades!
-
I did small mods on my Pioneer X, i filed blade edge to inside can opener to act as hook like package opener also bit improved phillips part so it goes bit deeper.
I have also shortened bit my awl so now its bit stronger and sharper. It may not look shsrp but it is.Mods are bit rough but both do their jobs and orginal purpose still stays.


Only Tools Matters
-
@Antti Lammi said:
I did small mods on my Pioneer X, i filed blade edge to inside can opener to act as hook like package opener also bit improved phillips part so it goes bit deeper.
I have also shortened bit my awl so now its bit stronger and sharper. It may not look shsrp but it is.Mods are bit rough but both do their jobs and orginal purpose still stays.


Only Tools Matters
Looks good Antti, I have done similar to one of my can openers, but more of a hook shape, pretty useful.
-
@Enginears said:
Looks good Antti, I have done similar to one of my can openers, but more of a hook shape, pretty useful.I first thinked that hook type but decided to make straight blade since i noticed its more useful for me.
Only Tools Matters
-
Lately I have been wanting to make mods that seem out of place and time. The fishing tool mod was one, wooden scales, bail, limited tools. On a similar thing I have had this one in my notebook for a while, but hadn’t quite figured out if it would be alox or not, or a 100mm. This one is the “buzzsaw gardener” :D like a buzzsaw trapper only a Vic gardener. Thicker handle, no back tools, just saw and blade. I wanted to go brass liner but got too impatient to wait for the material.
[attach id=0 msg=2468950]
[attach id=1 msg=2468950] [attach id=2 msg=2468950]


-
@Enginears said:
Lately I have been wanting to make mods that seem out of place and time. The fishing tool mod was one, wooden scales, bail, limited tools. On a similar thing I have had this one in my notebook for a while, but hadn’t quite figured out if it would be alox or not, or a 100mm. This one is the “buzzsaw gardener” :D like a buzzsaw trapper only a Vic gardener. Thicker handle, no back tools, just saw and blade. I wanted to go brass liner but got too impatient to wait for the material.
[attach id=0 msg=2468950]
[attach id=1 msg=2468950] [attach id=2 msg=2468950]Nice mod
Only Tools Matters
-
After my last mod I successfully assembled some spare leftovers into a Spartan as I didn't have one already, went well. However, as I intended I moved on to attempt a Yeoman mod. Ive managed to assemble it, but the combo tool very slightly catches/rubs on the main blade, which is rather annoying. Ive checked 2 other SAKs with Combo tool, 1 clears it, the other (a very old Compact with no file on the hook) rubs a very small amount. Im wondering what the cause might be - my guess is poor peening during assembly. Annoyingly the peening on the Spartan went really well but was more troublesome on the Yeoman. Anyone able to confirm my suspicions? (or offer alternative explanation)
Cheers!
-
Are you certain the peening is tight enough on both tools? Sometimes the blade needs a few extra taps to move it fully over in my experience. Also using the older thicker blade makes the rubbing more likely.
That said, I once bought a waiter that has the two tools rubbing more than I like and it was stock from the factory. Never did figure a specific culprit.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

