April Rebar and Friends Challenge
-
Everyone made me hungry, so I used my Rebar to get an apple ready.
Craig

-
Day 05
I used the awl to open a package.
-
Day 5
Wilma the Weimaraner did a runner under the fence in the back yard.
Used Fat Boy to do a temporary repair until this weekend.
Seen here clipping some zip tie.

-
@Rich_SD said:
I have a spare diamond file, but the pivot hole is a little larger than the Rebar's handle pivot. How did you make that work?You have to cut it down a little shorter, grind the correct profile to lock in place in a Rebar and redrill a new pivot hole

I know there are pics of it in the thread over in the amod squad, I need to go and find the thread

-
-
Thanks, Poncho!

Yeah, I don't have the tools necessary to pull off that file mod.
-
Day 5;
Found this figure cheap on eBay, and used the serrated blade to make quick work of the clam pack.

-
@HarleyXJGuy said:
Day 5Wilma the Weimaraner did a runner under the fence in the back yard.
Used Fat Boy to do a temporary repair until this weekend.
Seen here clipping some zip tie.

Wienaraners are beautiful dogs in my book! Very active but pretty.
Please share a picture of Wilma if you can get to chill long enough!
-
Some spiffy work, Rich.
Day 5
No interesting uses today, opened a package or two. I had to relight the pilot light on the furnace today, I guess I should've done the firestarter challenge.
After carrying the Rebar for a week or so, and putting it through some decent paces, I love this thing. I'd probably still take a Spirit over it if I had to pick one PBMT for life, but this is my ideal Leatherman. The size is great, the tool selection is solid, the deployment isn't stabby or clumpy or any other kind of awkward like a lot of Leathermans are. I know it's not as flashy as an Arc (or even a Wave), but this is the ideal EDC LM IMO.

-
Nice photos, everyone!
@BPRoberts said:
After carrying the Rebar for a week or so, and putting it through some decent paces, I love this thing. I'd probably still take a Spirit over it if I had to pick one PBMT for life, but this is my ideal Leatherman. The size is great, the tool selection is solid, the deployment isn't stabby or clumpy or any other kind of awkward like a lot of Leathermans are. I know it's not as flashy as an Arc (or even a Wave), but this is the ideal EDC LM IMO.Agreed. It's such a great size for EDC, and while nothing is instantly accessible like with other tools, every tool is reliable and useful. (Presumably including the wire stripper, but I kind of suck at using it well.)
Day 5
I was driving for the first half of the day, so I was half worried I wouldn't have a reason to use the Rebar today. But to my delight, I needed to cut open an old toy to rescue a new toy that had gotten stuck inside. :D
And then I got to use the Rebar to install a new floodlight in our carport. Totally rocked it. The wire cutters are excellent; I'm loving the serrated blade more every day; the wire stripper is, well, kind of a pain; and the long Phillips is chef's kiss excellent.
Tomorrow, I'll be traveling by train, so the Rebar might be at risk. Fingers crossed it won't be a problem. My backup tool is basically a flathead/pry bar with a circular cutter inside it (CRKT 9913), which is handy enough, but I'd rather have a multitool.

-
@Rich_SD said:
Thanks, Poncho!
Yeah, I don't have the tools necessary to pull off that file mod.
No problem, Rich
really all you would need is a Dremel and a drill, you can also use a Dremel as the drill I believe (might have to get an adapter for that though)
Just takes practice so don't sell yourself short that it is beyond your abilities 
-
More awesome pics, guys

-
@LoopCutter said:
Wienaraners are beautiful dogs in my book! Very active but pretty.Please share a picture of Wilma if you can get to chill long enough!
Will do. At the hardware store atm but once I get home.
She is very well trained so picture will be easy. Also 10 years old so most of here cray has gone away.
-
Day 6
Have a busy day planned so Fat Boy will see a good bit of use.
Morning coffee while we contemplate activities and supplies needed.

Fence repair, toilet repair, snowblower storage and get the mower up and running.
-
Same tool choice
[attach id=0 msg=2472657]Day plans are very similar, instead of hardware, Sam’s Club for supplies. Creamer, water 8oz size, I do’t know until check out.
Except, the fence, I removed after last dog passed, wife’s request to avoid getting another pup on a whim.
And, awl 3 toilets were replaced with tall boy, elongated style that were water efficient. Maybe 4 years past.But spot on about swapping snowblower (used twice), with the lawnmower prep.
Maybe today, or tomorrow, or day after that.

-
Good thing I have a wife.
Almost forgot Wilma had a Vet appointment for some shots.
Here she is waiting for the Doc.

-
Day 6
Went to pack up some stuff from the old place. Removed this towel ring to move put up, probably in our laundry/half bath. My wife asked, "do you have the right screwdriver for that?"
In fact, I needed TWO different screwdrivers. No problem for the Rebar. 


-
👍.

Two different 👍
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
) in it :D