April Rebar and Friends Challenge
-
Some spiffy work, Rich.
Day 5
No interesting uses today, opened a package or two. I had to relight the pilot light on the furnace today, I guess I should've done the firestarter challenge.
After carrying the Rebar for a week or so, and putting it through some decent paces, I love this thing. I'd probably still take a Spirit over it if I had to pick one PBMT for life, but this is my ideal Leatherman. The size is great, the tool selection is solid, the deployment isn't stabby or clumpy or any other kind of awkward like a lot of Leathermans are. I know it's not as flashy as an Arc (or even a Wave), but this is the ideal EDC LM IMO.

-
Nice photos, everyone!
@BPRoberts said:
After carrying the Rebar for a week or so, and putting it through some decent paces, I love this thing. I'd probably still take a Spirit over it if I had to pick one PBMT for life, but this is my ideal Leatherman. The size is great, the tool selection is solid, the deployment isn't stabby or clumpy or any other kind of awkward like a lot of Leathermans are. I know it's not as flashy as an Arc (or even a Wave), but this is the ideal EDC LM IMO.Agreed. It's such a great size for EDC, and while nothing is instantly accessible like with other tools, every tool is reliable and useful. (Presumably including the wire stripper, but I kind of suck at using it well.)
Day 5
I was driving for the first half of the day, so I was half worried I wouldn't have a reason to use the Rebar today. But to my delight, I needed to cut open an old toy to rescue a new toy that had gotten stuck inside. :D
And then I got to use the Rebar to install a new floodlight in our carport. Totally rocked it. The wire cutters are excellent; I'm loving the serrated blade more every day; the wire stripper is, well, kind of a pain; and the long Phillips is chef's kiss excellent.
Tomorrow, I'll be traveling by train, so the Rebar might be at risk. Fingers crossed it won't be a problem. My backup tool is basically a flathead/pry bar with a circular cutter inside it (CRKT 9913), which is handy enough, but I'd rather have a multitool.

-
@Rich_SD said:
Thanks, Poncho!
Yeah, I don't have the tools necessary to pull off that file mod.
No problem, Rich
really all you would need is a Dremel and a drill, you can also use a Dremel as the drill I believe (might have to get an adapter for that though)
Just takes practice so don't sell yourself short that it is beyond your abilities 
-
More awesome pics, guys

-
@LoopCutter said:
Wienaraners are beautiful dogs in my book! Very active but pretty.Please share a picture of Wilma if you can get to chill long enough!
Will do. At the hardware store atm but once I get home.
She is very well trained so picture will be easy. Also 10 years old so most of here cray has gone away.
-
Day 6
Have a busy day planned so Fat Boy will see a good bit of use.
Morning coffee while we contemplate activities and supplies needed.

Fence repair, toilet repair, snowblower storage and get the mower up and running.
-
Same tool choice
[attach id=0 msg=2472657]Day plans are very similar, instead of hardware, Samโs Club for supplies. Creamer, water 8oz size, I doโt know until check out.
Except, the fence, I removed after last dog passed, wifeโs request to avoid getting another pup on a whim.
And, awl 3 toilets were replaced with tall boy, elongated style that were water efficient. Maybe 4 years past.But spot on about swapping snowblower (used twice), with the lawnmower prep.
Maybe today, or tomorrow, or day after that.

-
Good thing I have a wife.
Almost forgot Wilma had a Vet appointment for some shots.
Here she is waiting for the Doc.

-
Day 6
Went to pack up some stuff from the old place. Removed this towel ring to move put up, probably in our laundry/half bath. My wife asked, "do you have the right screwdriver for that?"
In fact, I needed TWO different screwdrivers. No problem for the Rebar. 


-
๐.

Two different ๐
-
@BPRoberts said:
Day 6Went to pack up some stuff from the old place. Removed this towel ring to move put up, probably in our laundry/half bath. My wife asked, "do you have the right screwdriver for that?"
In fact, I needed TWO different screwdrivers. No problem for the Rebar. 
Wife of little faith.
-
@LoopCutter said:
Maybe today, or tomorrow, or day after that.Went with the LC method and got very little done today. Well I did drink beer so thereโs that.
-
Day 6
I was at the fire academy today for a structure burn session (unfortunately it's tomorrow too) so I didn't get to put my Rebar to work today. But afterwards we went out to eat and I snagged this Pic. What's better than Leathermans and pizza? Couldn't enjoy it though; I had to eat salad because of my diet. Looking forward to getting my next blood work out of the way and eating some yummy food in moderation.
Craig

-
Day 6:
Light cutting, but no other use.
Made an afternoon impulse trip to a local antique/junk/tool (well, everything) store, and bought a Minolta-16 MG-S camera ($15--needs new foam for the back light seal and a good going over by an expert), Cat's Meow depicting Harman Chapel at Bluefield College ($2) and a pretty much new MegaPro 15-in-1 ($3).


-
Day 6
On the train today. Rebarโs in stealth mode, but it did help me open a stubborn pack of fruit snacks. Thatโs literally all. One cut. :(

-
Day 06
I only needed the one screwdriver to tighten a screw in a hinge.
-
Wilma ๐
Thank you! Hope her visit was uneventful and she will soon forgive you.
She does look to be a chilled, smart, dog. Can see it in the eyes.
-
@LoopCutter said:
Wilma ๐Thank you! Hope her visit was uneventful and she will soon forgive you.
She does look to be a chilled, smart, dog. Can see it in the eyes.
She is.
Sometimes to smart for her own good.
Just the usual shots and check up.
-
Day 7
Thought I'd get some action shots of the ST300 attempting to fix the sump pump. Instead, all it needed was a finagling to realign the rod the float rides on. At least I hopefully won't need to use the rules for water in there anymore. Here's come big/little bro comp shots.
Closed size comparison:
[attach id=0 msg=2472825]ST300 is a good big longer than the Rebar, and a little the other ways chunkier as well.
And open comparison:
[attach id=3 msg=2472825]Plier head is substantially larger, and has an extra stranded wire cutter at the bottom, indicated by the arrow on the right.
The Rebar is often billed as "just" a shrunken down ST300, but there are a few changes:
[attach id=1 msg=2472825]The awl in the Rebar has broader proportions, including in the sewing eye. You can also see the extra "medium" flathead in this picture. LM motto: When in doubt, more flatheads.
The small flathead moves to the other handle:
[attach id=2 msg=2472825]And finally, a major difference that I'm surprised I never noticed, the blade shape. The ST300 came from a slightly shady source, and I was worried for a second, before I looked on the Leatherman site and saw it's supposed to be like that. The Rebar has a gentle serrated sheepsfoot, while the ST300 is an aggressive wharncliffe/reversed tanto. I think I prefer the Rebar's shape.
Overall, I prefer the Rebar as an EDC, but the ST300 is a great "one tool toolbox." I have another ST300 lives at the camper, and I'd say it's handled 90% of the maintenance without any help from other tools. It's too big/heavy for me to EDC, but if I'm already carrying a tool pouch/box/belt or if I want something to take over to a buddy's to work on something, it's the tool I'm most likely to reach for. This one mostly lives in my toolbox, where it can be a backup if someone else grabbed the pliers I need, or if I need my wife to hand me a tool and I don't want to play the "no, the other screwdriver" game.




Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better ๐
Register Login