Explorer Challenge May 2024
-
Does anybody wonder what happens behind the wood when using self drilling sheet metal screws. I am re-purposing some 3/8” plywood from the interior of my cargo trailer. Obviously it was held in place then self-drilling screws installed.
I did not want the metal debris that was embedded. Explorer corkscrew to the rescue. It made minimal invasion into the wood, but, easily and cleanly removed the metal debris.[attach id=0 msg=2476847]
[attach id=1 msg=2476847]
[attach id=2 msg=2476847]


-
Day 06
My small blade is the same shape as Grand Banana's small blade so I guess it is normal. I was just expecting more of a spear point. Anyway, I used it today to trim a cigar.

-
@Alan K. said:
Day 05
The small blade on my Explorer seems to have been modified to almost a Wharncliffe or sheepsfoot shape by a previous owner who probably broke or bent the tip. It's not a very good picture but the blade just looks odd to me.
I’m wondering if this isn’t simply the result of repeated sharpening.
-
@nate j said:
I’m wondering if this isn’t simply the result of repeated sharpening.
@Jeffjeeptj said:
Does anybody wonder what happens behind the wood when using self drilling sheet metal screws. I am re-purposing some 3/8” plywood from the interior of my cargo trailer. Obviously it was held in place then self-drilling screws installed.
I did not want the metal debris that was embedded. Explorer corkscrew to the rescue. It made minimal invasion into the wood, but, easily and cleanly removed the metal debris.[attach id=0 msg=2476847]
[attach id=1 msg=2476847]
[attach id=2 msg=2476847]That’s a good corkscrew use
-
Day 6: I’m back to the yellow Explorer today. I just love the new style magnifier too much to not use it.
Here’s a close-up of the striations on this fine example of a Lemurian quartz cluster. Legend says that these striations hold a secret language explaining the lost secrets of the universe.
[attach id=0 msg=2476925]
[attach id=1 msg=2476925]

-
Day 5
Several Explorer activities today using a variety of tools.
[attach id=0 msg=2476943]
Philips fixed yet another loosening hinge and removed a few screws from a storm window for more wasps. They’re everywhere right now.
Cap lifter to depress a stuck cabinet child lock and pry a nail out.
Small blade to finagle open a string cheese and large blade to cut up celery.
Scissors opened a couple wrappers.
[attach id=1 msg=2476943]
Mag lens to show the kids these clover flowers or whatever they are
[attach id=2 msg=2476943]
Also toothpick and tweezers for their intended uses.
Tools used:
Large blade x3
Can opener x1
Scissors x3
Small blade x2
Cap lifter x2
Toothpick x2
Tweezers x2
Philips x1
Mag lens x1


-
Great stuff for today, y'awl!
-
Day 6
Slow day for the Explorer. Trimming a single cigar was the only use today.
Challenge totals:
Large Blade 9
Small Blade 7
Scissors 5
Hook 1
Inline Phillips 1 -
Day 6 (forgot pic)

-
Sportsman is shortening an air duct hose to allow a portable AC unit to fit closer to the wall. Still meeting the clearance requirements.
[attach id=0 msg=2476994]

-
Day 7 of 30
No usage today for my Explorer except playing with

Only Tools Matters
-
Day 07
I used the inline Phillips driver to tighten some drawer pulls.

-
Day 6:
Yesterday was slow in the office, but I spent some time with my dog after work.

-
Day 6
Today was very warm and sunny, but not close enough to summer to use the mag lens as a fire starter.
Tried the awl as ferro rod striker. Like my other 91mm SAKs it just doesn’t work well for me. Neither does the awl on my Wave. Wave saw started this fire. The Explorer blade crafted feather sticks at least.
[attach id=0 msg=2477096]
[attach id=1 msg=2477096]
Tools used:
Large blade x4
Can opener x1
Scissors x3
Small blade x2
Cap lifter x2
Toothpick x2
Tweezers x2
Philips x1
Mag lens x2
Awl x1

-
Day 7
It was a three-cigar day, so the small blade did the honors.
After lunch, the toothpick performed its designed function.
Later, after patching a flat tire on my son’s bike, I aired it up to check for leaks before putting it back on the rim. Then, I had to let the air all the way out to so I could get it back on the rim. If only I had a tool handy to do this without resorting to going out to the vehicles for a tire gauge. But wait! It turns out the inline Phillips is the perfect tool for this job. The fit is uncanny, almost like it was made for it.
Challenge totals:
Large Blade 9
Small Blade 10
Scissors 5
Hook 1
Inline Phillips 2
Toothpick 1
-
@Jeffjeeptj said:
Sportsman is shortening an air duct hose to allow a portable AC unit to fit closer to the wall.You did better than I ever could. Those little buggers always unravel when I try that.
@hsherzfeld said:
spent some time with my dog after work.
Another great day, y'awl!
-
Explorer large blade is opening a package of foam.
[attach id=0 msg=2477144]

-
@nate j said:
Day 7It was a three-cigar day, so the small blade did the honors.
After lunch, the toothpick performed its designed function.
Later, after patching a flat tire on my son’s bike, I aired it up to check for leaks before putting it back on the rim. Then, I had to let the air all the way out to so I could get it back on the rim. If only I had a tool handy to do this without resorting to going out to the vehicles for a tire gauge. But wait! It turns out the inline Phillips is the perfect tool for this job. The fit is uncanny, almost like it was made for it.
Challenge totals:
Large Blade 9
Small Blade 10
Scissors 5
Hook 1
Inline Phillips 2
Toothpick 1That’s really interesting I’ll have to try it. I wouldn’t put it past victorinox to have actually designed such intention.
@Jeffjeeptj said:
Sportsman is shortening an air duct hose to allow a portable AC unit to fit closer to the wall. Still meeting the clearance requirements.[attach id=0 msg=2476994]
I think every time I’ve installed window units, trimmed a floor AC exhaust/fit the window piece, and changed dryer vents, I’ve used a multitool. These are the jobs made quick by a good multitool.
-
Day 8 of 30
Used bottle opener to open lid of mayoanase jar. Little prying and hears pop and you can easily open lid afterwards.

Only Tools Matters
-
Day 07:
More screwdriver use.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login