Explorer Challenge May 2024
-
Day 11:
I used the magnifier to take some close-ups of some flowers.
[attach id=1 msg=2477896]
[attach id=2 msg=2477896]


-
Day 12 of 30
Used today phillips to open battery cover on my multimeter, it needed battery replacement so Explorer helped me out.

Only Tools Matters
-
Day 11
Looked at slugs with the kids
[attach id=0 msg=2477939]
Fixed the weed whacker
[attach id=1 msg=2477939]
Took down some more storm windows this time on the old garage side. Basically rotted out and had to poke through the sealant on one.
[attach id=2 msg=2477939]
Tools used:
Large blade x7
Can opener x4
Scissors x3
Small blade x3
Cap lifter x5
Toothpick x4
Tweezers x2
Philips x3
Mag lens x3
Awl x2
Hook x2


-
Day 12
I used the main blade to cut an apple and a pear for a snack.
-
Day 11
Scissors trimmed the tail off a disposable bracelet.
Small blade trimmed three cigars.
Challenge totals:
Large Blade 11
Small Blade 19
Scissors 8
Hook 1
Inline Phillips 2
Toothpick 1
Cap lifter 1
-
Day 12
Scissors trimmed a couple of jagged fingernails.
Small blade trimmed a cigar.
Inline Phillips tightened the handle on a pot lid.
Large blade cut a string off my son’s sweatshirt.
Challenge totals:
Large Blade 12
Small Blade 20
Scissors 10
Hook 1
Inline Phillips 3
Toothpick 1
Cap lifter 1The Explorer and I relaxed on the couch after returning home from camp.

-
Day 12:
With a little help from the main blade, I got to do some cardboard carpentry today.
[attach id=0 msg=2477988]

-
Getting ready to trim my mustache.
[attach id=0 msg=2478019]

-
Day 13 of 30
Some whittling with Explorer

Only Tools Matters
-
Day 12:
No actual Explorer use, but I sharpened up a red Explorer that I haven’t carried in awhile to add to the Explorer carry rotation.

-
Day 13
I used the inline Phillips driver to remove the light kit on a ceiling fan so I could replace the 3 way pull chain switch that controls the fan. I really, really, really like the inline Phillips. I couldn't have done it with a backside Phillips as there wouldn't have been any room to turn it.
-
Another great day from awl, especially the "through the magnifier" shots!
I'm starting to see the value in that layer, and I'm thinking it would be really cool to mod into a Pioneer or a Tinker. -
Great stuff everyone.
@Alan K. said:
Day 13
I used the inline Phillips driver to remove the light kit on a ceiling fan so I could replace the 3 way pull chain switch that controls the fan. I really, really, really like the inline Phillips. I couldn't have done it with a backside Phillips as there wouldn't have been any room to turn it.This is the reason I don’t go with a tinker model. I just don’t think I’d get into as many uses compared wjth the Explorer.
@Antti Lammi said:
Day 13 of 30Some whittling with Explorer

Only Tools Matters
Looks great
@Jeffjeeptj said:
Getting ready to trim my mustache.[attach id=0 msg=2478019]
It’s no wonder we’ve had a couple mustache trim uses so far Vic scissors are wonderful for grooming.
Loving the cigar posts. I haven’t had time to sit down and enjoy one in a while so I’m living vicariously through you awl.
-
Day 12
Some blades use today to make lunch and trimmed my goatee a little bit.
[attach id=0 msg=2478183]
[attach id=1 msg=2478183]
Tools used:
Large blade x8
Can opener x4
Scissors x4
Small blade x4
Cap lifter x5
Toothpick x4
Tweezers x2
Philips x3
Mag lens x3
Awl x2
Hook x2

-
Day 13:
I used the flat diver to tighten the screw on a rotary tool cutoff wheel.

-
Day 14
I needed to install a new towel bar. Explorer opened the package.
[attach id=0 msg=2478208]
[attach id=1 msg=2478208]

-
Day 13:
Had to cut up some fresh air tubing for my AeroGarden.
[attach id=0 msg=2478253]

-
Day 14 of 30
Used blade to open noodle package.

Only Tools Matters
-
Day 13
A few uses so far today.
Made my lunch
[attach id=0 msg=2478317]
Played the lottery
[attach id=1 msg=2478317]
Stuffed some steel wool to fill a gap
[attach id=2 msg=2478317]
Also used both the toothpick and tweezers
Tools used:
Large blade x9
Can opener x5
Scissors x4
Small blade x4
Cap lifter x6
Toothpick x5
Tweezers x3
Philips x3
Mag lens x3
Awl x2
Hook x2


-
Day 14:
Found a dead bumble bee, and had to examine it through the newer style magnifier.
[attach id=0 msg=2478343]
[attach id=1 msg=2478343]

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login